Reviews
Fits: BMW R1200ST K28 (05/2003-11/2007), BMW R1200R K27, BMW F800ST K71 (10/2011-07/2018), BMW F800S K71 (10/2011-07/2018), BMW F800R K73 (11/2013-07/2018), BMW F800GT K71 (10/2011-07/2018)
It is a good item
Good quality product.
It also arrived earlier than the due date.
View detail
Fits: BMW F800 ST K71, BMW F800 ST, BMW F850 GS K81, BMW HP2 Sport K29, BMW HP4 K42, BMW K1200 GT K44, BMW K1200 GT, BMW K1200 R K43, BMW K1200 R Sport K43, BMW K1200 R SPORT, BMW K1200 R, BMW K1200 S K40, BMW K1200 S, BMW K1300 GT K44, BMW K1300 GT, BMW K1300 R K43, BMW K1300 R, BMW K1300 S K40, BMW K1300 S, BMW K1600 GT K48
Cylinder replacement for C400GT Top case 77439829379
I bought a Top case from another Motorcycle to use on my C400GT so that I could match the pin of the Cylinder to the new key.
I ended up doing it and it was surprisingly easy.
1. Remove the two inner ScrewScrews.
2、It is difficult to work with, so I use a stick? Hinge (where the turn is made) Poke and pull out the iron Pin of the
3, Remove two ScrewScrews from the inside of the removed assembly.
Be careful not to remove the lid too roughly at this time, or you may be surprised when the Spring inside pops out.
4. Then, the entire Cylinder gasket comes off, so it is large and sturdy.
5, How to pull out the Cylinder and how to match it with the new key is the same as Pannier such as R1250GS, so you can find it by searching.
6、When you assemble it at the end, you need to be careful or the lock may not close. You need to make sure that the plastic clasps are properly aligned. (I can't explain it well, but you'll understand if you try.)
View detail
Fits: BMW R1200 GS Adventure K51, BMW R1200 GS ADVENTURE, BMW R1200 GS K50, BMW R1200 GS, BMW R1200 GS, BMW R1200 R K53, BMW R1200 R, BMW R1200 RS K54, BMW R1200 RS, BMW R1200 RT K52, BMW R1200 RT
Functional and high quality! (And expensive!)
Only the clutch lever was replaced (about 2.5 years ago).
In NORMAL, the lever is angular and cannot be Smoothly released (semi-crab).
This is a disadvantage for the R1200RS, which has a thin low-speed Torque.
HPLever is rounded and can be Smoothly Released. The semi-claustrophobic operation is clearly improved.
I am satisfied with the quality and Large, but the shaft was slightly tight when I installed it, so I polished it with waterproof paper (even though it is OEM?). I am very satisfied with the quality and Large.
At the time, I bought it for 20,000 yen, but looking at the price now, it is 33,000! No, I hesitate to buy it.
I passed up on Brake because it is grip oriented and I thought NORMAL would not interfere (no, it's 40,000 for both), but I should have bought it.
HP was not a date.
View detail
Fits: BMW R1200 R, BMW R1200 RS K54, BMW R1200 RS, BMW R1200 S K29, BMW R1200 S, BMW RnineT K21, BMW RnineT Pure K22, BMW RnineT Racer K32, BMW RnineT Scrambler K23, BMW RnineT Urban G.S K33, BMW S1000 R K47, BMW S1000 R, BMW S1000 R, BMW S1000 RR K46, BMW S1000 XR K49, BMW S1000 XR, BMW C evolution K17, BMW C600 Sport K18, BMW C600 SPORT, BMW C650 Sport K18
It is better than buying from a dealer, but expensive.
BMW's design may not be good, but the construction can easily break depending on how it hits, and the price for this is something to be worked out. View detail
Fits: BMW F800 ST K71, BMW F800 ST, BMW F850 GS K81, BMW HP2 Sport K29, BMW HP4 K42, BMW K1200 GT K44, BMW K1200 GT, BMW K1200 R K43, BMW K1200 R Sport K43, BMW K1200 R SPORT, BMW K1200 R, BMW K1200 S K40, BMW K1200 S, BMW K1300 GT K44, BMW K1300 GT, BMW K1300 R K43, BMW K1300 R, BMW K1300 S K40, BMW K1300 S, BMW K1600 GT K48
A little bit of hang goes in.
I bought this for a Single seat cowl.
I like the fact that I can make it according to my Key.
The work is done while holding down a fairly smallSpringetc., so there will be a bit of hang.
The spring will fall out when you insert it into the key box, so be careful or you will lose the spring.
View detail
Good
Seat height is increased by 80mm. knee bending is reduced and it is easier to ride. View detail
Fits: BMW C400X K09, BMW F800 GT K71, BMW F800 GT, BMW F800 GT, BMW F800 R K73, BMW F800 R, BMW F800 R, BMW F800 R, BMW F800 R, BMW F800 S K71, BMW F800 S, BMW F800 ST K71, BMW F800 ST, BMW G310 GS K02, BMW G310 GS, BMW G310 R K03, BMW G310 R, BMW K1200 GT K44, BMW K1200 GT, BMW K1300 GT K44
Purchased with the replacement of a vehicle
I tried to use the VARIOTop case that was installed on my BMW F750GS on my newly purchased G310GS, but the key shape is different and cannot be locked.
I thought about buying a key from a dealer, but I had already given away my F750GSBody and the key number was unknown, so it seemed like a waste to go to the trouble of ordering a regular key just to open and close the top case.
Then, I searched on webike, thinking that if I had a horizontal groove type Wave key, I could use it only by replacing the Plate of the Key cylinder.
OEM Key Quantity:2pc. Get Cylinder with Set 。
As expected, the key lock of the Top case was created by simply replacing the Plate in the existing key cylinder with the purchased key.
Cylinder is not necessary for VARIOTop case because it is not suitable for VARIOTop case, but it may be used in the future when replacing the vehicle, so it should be kept.
OEM key quantity for less than 3,000 yen using Point:2pc. We are satisfied with the Set we got.
View detail
Fits: BMW R1200 GS Adventure K25, BMW R1200 GS K25, BMW R1200 GS, BMW R1200 GS, BMW R1200 R
bright
Fog light can be retrofitted to make it much brighter.
This is recommended as it makes nighttime driving easier.
View detail
Fits: BMW F650 GS K72, BMW F650 GS, BMW F650 GS, BMW F650 GS, BMW F700GS, BMW F700GS, BMW F700GS, BMW F800 GS Adventure K75, BMW F800 GS ADVENTURE, BMW F800 GS ADVENTURE, BMW F800 GS K72, BMW F800 GS, BMW F800 GS, BMW F800 GS, BMW F800 GS, BMW R1200 GS Adventure K51, BMW R1200 GS, BMW R1200 GS, BMW R1200 GS, BMW R1200 R
bright
Headlight alone can be used in dark situations.
It is brighter with auxiliary Light.
It is useful on mountain roads where there are no streetlights.
Installation is easy as it is Bolt On.
View detail
Fits: BMW F800 ST K71, BMW F800 ST, BMW F850 GS K81, BMW HP2 Sport K29, BMW HP4 K42, BMW K1200 GT K44, BMW K1200 GT, BMW K1200 R K43, BMW K1200 R Sport K43, BMW K1200 R SPORT, BMW K1200 R, BMW K1200 S K40, BMW K1200 S, BMW K1300 GT K44, BMW K1300 GT, BMW K1300 R K43, BMW K1300 R, BMW K1300 S K40, BMW K1300 S, BMW K1600 GT K48
Convenient
This is convenient because all keys can be matched to the same one.
Buy a Pannier case, buy this key cylinder, and you'll be all set.
The same key as the Engine key will open the Pannier.
It's convenient
View detail
Fits: BMW R1200 GS Adventure K25, BMW R1200 GS K25
Fog and Quantity:Set
Fog and Quantity:I bought it in Set.
You will need this product if you buy the retrofit fog, so this product is also Quantity:Set purchase.
View detail
Fits: BMW R900 RT K26, BMW R900 RT, BMW i3 I01 LCI, BMW i3 I01, BMW HP K25, BMW C400X K09, BMW A67, BMW R1200 ST, BMW HP2 MEGAMOTO, BMW R1200 S, BMW R1200 RT, BMW HP2 Sport K29, BMW R1200 RT, BMW R1200 S K29, BMW RnineT K21, BMW R1200 ST K28, BMW HP2 ENDURO, BMW R NINE T SCRAMBLER, BMW R NINE T URBAN G|S, BMW R NINE T PURE
OEM Product, no doubt about it!
I don't mind.
I just hope that Webike will continue to handle OEM Products. w
I'd rather buy from a Dealer with the Points I've saved up? I would like to purchase at a discount.
View detail
suzuki I put it on my gixxer150.
suzuki The gixxer150OEMHandlebar Guard is a small, attachment-like device that doesn't seem to be useful.
I've been looking around for a Handlebar Guard that's short and small enough that it won't hit the lever tadpoles and attach well, so I've been looking for one that's large in size.
This is a solid product that can be left as is, or used in the winter with the optional Hand Guard Extension. It's perfect if you add
I used Bosch's bracket to attach it because the bracket that came with it doesn't fit well.
https://www.webike.net/sd/1057226/
View detail
Fits: BMW HP K25, BMW F850 GS K81, BMW F800 GS, BMW F800 GS, BMW F800 GS, BMW R1200 RT K26, BMW R1200 R K27, BMW R900 RT K26, BMW R1200 ST K28, BMW R1200 GS, BMW R1200 GS, BMW R1200 GS, BMW R1200 GS, BMW K1200 GT K44, BMW R1200 GS, BMW R1200 GS K50, BMW R1200 GS K25, BMW R1200 GS ADVENTURE, BMW R1200 GS ADVENTURE, BMW R1200 GS ADVENTURE
F850GS
It can be used for the current VARIOCase. View detail
Fits: BMW F650 GS K72, BMW F700GS K70, BMW F800 GS Adventure K75, BMW F800 GS K72, BMW F800 GT K71, BMW F800 R K73, BMW F800 S K71, BMW F800 ST K71
The peace of mind of an OEM
I used to prefer to use Filter made by K&N.
I liked the K&N because it was easy to remove and install due to the Nut on the Filter.
This time, I chose BMW OEM for my F800GS Filter because it was just in stock.
The performance, quality, and durability are all reliable.
View detail
Fits: BMW F650 GS K72, BMW F700GS K70, BMW F800 GS Adventure K75, BMW F800 GS K72, BMW F800 GT K71, BMW F800 R K73, BMW F800 S K71, BMW F800 ST K71
Runs good after Oil change.
The parts are hard to tell the effect, but they are in good shape. View detail
As expected for gsAdventure
This is a set up for Revit's OffTruckJacket and Pants, which I bought exclusively for the TENERE700. The design is light and supple, but does not compromise on protection performance, so you can enjoy the TENERE700 to the fullest! View detail
Fits: BMW F650 ST E169, BMW F800 GT K71, BMW F800 R K73, BMW F800 S K71, BMW F800 ST K71, BMW G650 GS R13, BMW G650 GS Sertao R13, BMW K1 K589, BMW K100 K589, BMW K100LT K589, BMW K100RS K589, BMW K100RS K589, BMW K100RT K589, BMW K1100LT K589, BMW K1100RS K589, BMW K1200 GT K41, BMW K1200 LT K589, BMW K1200 R K43, BMW K1200 R Sport K43, BMW K1200 RS K41
Reflector。
The OEM side case is made by BMW OEM.:Pair (for Left and Right) It is easy to be recognized by other cars when driving at night or in the tunnel. View detail
Refreshing。
I went to a dealer and asked them for advice and they gave me a pretty good price, so I went online and bought it. About half price. I'm sure there was some age-related deterioration, but my vision is also Refreshing.LargeI'm satisfied. View detail
Fits: BMW S1000 RR, BMW S1000 RR, BMW S1000 RR, BMW S1000 RR, BMW HP4 K42, BMW S1000 R K47, BMW S1000 R, BMW S1000 R, BMW S1000 RR K46, BMW S1000 RR HP4
Convenient for running meetings, etc.
You can use this to fill in the holes where Blinker, Mirror, Fender, etc. have been removed when making it a running or race expense. The holes are filled in to make it look more natural forme, which makes it look slightly better. The nice thing about this is that it also comes with a bag for storage. View detail