Reviews
Very good, but a little difficult to install
As Title
After installation, the sound pressure and Sound are very good.
It is not too bombastic, but it does have a low bass sound, and I am very happy with it.
The ECU has not been rewritten.
I don't feel any scuffiness in the low rpm range. I think the ECU should be rewritten and there should be no problem.
Installation difficulty is high.
Although there are installation instructions on YouTube, it does not work that well. It would be difficult unless you have some confidence in your skills.
The time required is about 2 to 3 hours.
Incidentally, I am involved in aircraft maintenance work and found it difficult, but not so difficult that I could not install it.
Maybe the one I bought was an outlier….
View detail
Exhaust sound is Large
This is a replacement with Full Exhaust System, but it is not difficult.
Although the removal of the cowl and, depending on the tool used, the removal of the right pedal (brake pedal) may be troublesome, I think it is a task within the range of anyone who can replace oil.
The sound is Large size because it is not Japanese Vehicle Inspection Correspondence.
Sound itself is a good sound.
Gasket is not included and must be purchased separately.
Since even the screw threads of the bracket are painted (to stop them from turning?), care must be taken when installing the bracket. Therefore, care should be taken when installing the bracket.
View detail
Style is good, Sound is good.
Installed on a '21 GSX-R125.
Installation is very easy and the Exhaust System Hanger is OEM.
Simply remove the OEM exhaust pipe and replace it with this one.
However, when replacing, it is necessary to remove the cowl on the side section.
Exhaust system replacement itself is easy and takes a little time if you are not used to removing the cowl.
The Large half of the actual work is the time to remove the Cowl.
Now, after the replacement, Sound sounds quite bass-heavy and good.
It has a baffle, but of course now that I've replaced it, I'm riding without the baffle.
It is more comfortable without it.
If there is a baffle, then neighborhood disturbance may be acceptable as a limit. If not, leave early or turn off the engine.
The Power feel does seem to have changed numerically.
I feel as if the high RPM range has been released.
Above all, the exhaust sound is a motivating sound when running.
It may be a slightly minor manufacturer, but I have a GSX-R750 with the same manufacturer's Slip-on Silencer.
It is a Manufacturer of Recommendation.
View detail
I like the sound and the look, but the mounting position doesn't fit.
Even with Idling, you will notice a change in sound. The appearance is also better than Earls Gear in terms of parenthesis. (A matter of taste) The price is cheap. However, the mounting position just doesn't fit. I spent a lot of time trying to get it to fit in the correct position, but I gave up. I think it is not a problem of how to assemble it, but I installed it with the exhaust flange and silencer in the proper position and allowed for the gap at the exhaust system fixing part under the car body. View detail
It is a good Exhaust System
The ride feels smoother, the design is good and I am satisfied with it.
As mentioned in other reviews, I wish the sound was a little smaller.
View detail
It can be fitted, but
It fits NINJA 650, but when changing the oil filter, the exhaust system has to be shifted because the gap between the oil filter and the exhaust system is only a few millimeters. Other than that, I had no problem. I like the sound at high rpm. View detail
Slightly inaccurate
All of the Japanese-manufacturer products that we wanted were not available due to undecided delivery dates, so we decided to purchase SCORPION, which was currently available and relatively inexpensive. Since I was originally interested in this manufacturer, it was not a compromise. However, since it is an overseas product and has not received Japan Government Certificated certification, I feel a little guilty about it. The package arrived in two pieces of corrugated ball. After checking the parts, the installation work started. The work is done while looking at a simple Instruction Manual. If you are not confident, it is safer to have a store do the work for you. Without the Disc Grinder, it would have been a disaster. It is important to have a certain amount of tools for installation, because there were about two places where it was difficult to tighten the flange nut due to the shape of the pipe. I needed to use a special tool, but I had a good tool on hand, so I was able to get away with it. The volume and sound quality was better than expected, and I was pleasantly surprised. View detail
Fits: PEUGEOT Django125, PEUGEOT Django150
Anyway, it's a blast.
Django's Exhaust System is one option.
I contacted Webig and was told that they did not have any examples of installation for the latest model year and did not know if it would work, but I took a chance and bought it.
First of all, if you just install it, it will interfere with the cooling fan case.
Since there is little play, it is barely 5mm wide when installed with adjustments.
You can never do it alone.
I wonder if it is not so noisy when the Engine starts? I test-drove the car.
When it warms up, it's a blast.
It is almost a straight pipe.
I wonder if they changed the spec. since many people who have installed it have commented on how quiet it is on youtube.
An InnerSilencer to be inserted in the middle was machined and installed.
But I guess it still stands out.
Anyway, it is too bombastic as it is.
View detail
Fits: YAMAHA N-Max 125, YAMAHA NMAX155
Quality problems!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How could it be broken like this?
Two years and two months of use
Mileage about 1500?
There is a strange noise from inside Silencer after 1.5 years.
Silencer mounting area is structurally problematic
View detail
nice sound
It's pretty well made for the price point, and I was able to install it with no modifications!
It wasn't too loud and it was just right for me!
View detail
I'm happy with my choice on looks!
There is nothing difficult about the installation, there are plenty of articles about replacing the exhaust system on the gsx-r125, so please refer to those articles. To be honest, it is very easy! LOL!
Idling is relatively quiet, but the sound when you turn it is quite loud! You can hear it when you turn it.
The sound is better, but the Torque seems to have dropped quite a bit, and since the Intake is still OEM, I'm going to change the Intake and see what happens.
View detail
It's a great product!
It's made in a Large size and it installs without any problems. It's much more powerful from low speed! I'm very happy with the design and the Large change. As for me, I wish the volume was a little smaller. View detail
Fits: YAMAHA Tracer900, YAMAHA Tracer900GT
SCORPIONCell Keto TaperExhaust System
[How is it used?
Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
Silencer is difficult to install.
The included Bracket and the Silencer Bolt hole do not match up well.
I'll be there in a minute.
Also, between the Silencer and the assembly where the o2Sensor is attached.
~ ←This type of part has exhaust leakage, so Quantity:Pair (for Left and Right) Please apply heat-resistant liquid Gasket to and assemble
How was your experience with it?
The sound is slightly larger than the Baffle ant and the vehicle inspection conformity exhaust system.
It's low and thick.
The sound quality of the without Baffle is even thicker and I like the sharpness of the sound, but
The sound is Large, so it may not be to some people's taste.
Availability and clarity of Instruction Manual
Instruction Manual is one sheet, but it is not a problem because the number of parts is small.
Items to buy together
Exhaust Gasket
Heat-resistant liquid Gasket
Spring hook
Tools used
38Ratchet wrench
Extension bar
12mmDeep socket
13mmCombination
Allen Wrench
Torque wrench
Spring hook
Service manual
View detail
The weight is heavy, but the construction is good.
It's quiet around the idling area, but when you turn it, you can hear a large single sound. The weight is heavy, but the construction is good. View detail
It's just a bad product.
The joint part of Silencer is an oval of 0.8mm, and the mounting hole of the Silencer and the Tandem Footpeg part which cannot be assembled is a product which should not be sold because there is a little Gap and it is not possible to install it straight and of course there is an exhaust leak. View detail
As I said, foreign-made, be careful about installing it yourself!
After all, there was some trouble such as the diameter of the Belt that connects Pipe is not usable small, etc. Because there was no Washer, the fixation of the Muffler silencer part could not be done, and after all, the motorcycle shop was the place of the photograph. I had the footpeg's bolt holes shaved and installed.
I am satisfied with the quality of the product, both in terms of look and sound.
Power wise, the bottom remains the same and I'm happy with the better acceleration in 4th, 5th, and 6th gears and easier overtaking. It was better if there was a torque up at low speeds, but the response at high speeds was better.
View detail
Cost performance ◎
I'm quite grateful for this price for the Full Exhaust System.
I really like the look of it.
The car is lighter and easier to handle.
The sound is still like a 250cc...but it sounds really good when you raise the rpm's.
The only trouble was that the screw that came with it didn't fit when I installed it, so I was very impatient.
I managed to get it on, but as a result, it took quite a bit of time for the Screw part.
Recommendations are made to install in plenty of time.
View detail
Affordable Full Exhaust System
I wanted to replace the exhaust system on my MT-09, and this was a good deal for the price I chose the product
Mounting surface
The product's instruction manual was a little bit too much for me because it was only a picture of the parts I was puzzled
The exhaust system is divided into 3 - 1 - 1, and is assembled from the exhaust pipe Then it took a while to put the rollers on
I learned that I can put 3-1 on the car body afterwards
Gasket is not included and must be purchased separately
Do not apply liquid gasket to the jointed parts or else the exhaust will leak
To remove the O2 sensor, you need to remove the body side Connector This was a little troublesome 。
Performance
The volume did not go up that much from the Normal muffler, but it sounded good
The mid to high rpm range came out better and I was satisfied with it
■ Others
Design is cool
Swing Arm's ClearanceLarge sturdy?
Overall, considering that you can buy a Full Exhaust System for this price It's perfect
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP
Excellent cost performance Full Exhaust System!
I installed it on MT-09
The OEM exhaust system is Short Type, and I like the design The short feeling of SCORPION was the deciding factor
・Short
Light (1/3 of 2.6kg NORMAL)
Not too noisy (with Baffle, plus a DB killer at the base of Silencer) (e.g. "I'll be back")
In Circuit, if you remove both of them, StraightSound is used
Made in Europe
100,000 yen budget
The color of this item is Chrome when it is new, but this item will have the characteristic burn of stainless steel pipes (The color will come back if you polish it with Stain Magic, etc.)
Silencer end's Reddish Ring is one of the most stylish
With the included Baffle, the volume is thicker and thicker in the low rpm range from Idling to mid-range From then on, it is moderately restrained
Silencer had e4 (EURO standard) marking
When you remove the Baffle, the sound is powerful in the whole area It's a pleasant sound
For a sense of power, a power graph is available on the ManufacturerSite and It seems to increase peak power by about 3ps without any loss of medium speed
To be honest, I couldn't feel the difference in Power Torque is also no problem
Low priced Asia products are also available, but I'd like to install the real thing because it's my beloved car
It's a great cosmetic
View detail
I think it's well made for the price
Is the sound quality as good as it sounds?
And a bit of a compromise?
without Baffle is a bit of a stretch, isn't it?
Fitting is not so bad, but by changing the exhaust system It's a shame that the OEM Under Guard cannot be installed I am very happy with this product
View detail