Reviews
Oil route is also a trusted SAMCOHose!
I recently replaced all the Hoses in my 20 year old Tuono Racing cooling system with SAMCO Hoses, and I used the special Hose BandKit to install them, but I have two extra Hose Bands.
I checked and it seems that the previous Hose kit included another Hose attached to the Engine from behind the Oil tank, which was the Hose Band.
So we decided to use the oil tank, which is currently not included in the kit and sold separately.
I purchased and installed the Hose.
Hose replacement is very easy if done at the same time as oil replacement, simply remove the old hose and install the SAMCOHose. 。
The SAMCOHose was much easier to install because of its flexibility compared to the OEMHose.
Material and durability are, of course, excellent, but the appearance is also very GOOD!
However, since this product is a HoseSingle Body, you need to prepare a separate Hose Band. I didn't need it because it was included in the Kit I bought before, as mentioned above. 。 Incidentally, the Hose BandKit for SAMCOHose has a flat surface on the back of the Band to prevent damage to the Hose. However, there does not seem to be a Hose BandKit for this Hose, so I think you need to prepare a Hose Band that is generally available. 。 The SAMCOHose is thicker than the OEMHose, so you will need two Hose Bands that are larger than the OEMHose Band.
It would be nice if the Manufacturer would attach it to the Hose, since it is a hassle to prepare it on our own since the sizes are different as shown here.
The hose band behind the oil tank may have a weak crimp if the OEM crimp type hose band is used, and in the worst case scenario, the hose may come loose (especially on the oil tank side) and spill oil all over the road surface. Therefore, it is not necessary to replace the hose, but it is recommended to replace the hose band with a screw-in type hose band.
View detail
Samco Hose Band
The commercial Hose Band did not feel right, so the Hose Band for Samco on Samco's Hose is good for a clean fitting. View detail
It gives a sense of customization.
I replaced the normal hose on my ZX-9R E type because it was getting damaged. I thought I would need to modify it a little, but I was able to replace it easily only by removing the Center, Under Cowl and Tank. Because the thickness of the hose became a little thick, I put a Washer on the Under Cowl part of the Mission side only. At the same time, I changed Coolant to HeatBlock, but the rise of the water temperature became a little slow? It is a degree, but I am satisfied with the Hose of Green Light which can be glimpsed. View detail
Happy to keep you riding, be careful with the torque management.
This is an imprint used on a 1990 CBR400RR (NC29).
It is a Racer replica that has reached the level of the old car, except for universal parts. Exclusive Design parts are often no longer available from the Manufacturer. The Radiator hose is no exception, and unfortunately, it is no longer possible to get a very good idea or to use a good quality hose. It's impossible to repair with OEM PartsOnly if you don't have the patience.
My NC29 also has a lot of pressure from the seams near the Thermostat. The Coolant was leaking and troubling, but the Material from SamcoSports:When I found out that Silicon's Radiator hose is lined up, I repaired it this time I bought it as a
Material for use:I did some preliminary research on Silicon's Radiator hose and found it to be an inexpensive The ones that aren't as good may have difficulty sticking together and may be more prone to leaks than OEMHose, and other concerns. I've seen a few descriptions, but in my case it's better than continuing to use 30 years of deteriorating OEMHose I waited for it to arrive, hoping that it would.
As for the Hose of Samco Sports, the coloring is also various, and the Custom element is strong, and it is difficult to get lost in the But I want to build it simple with silver and black color around the Engine. Order the Black. By the way, the standard color for Samco Sports is Blue.
Webike says it can take as little as 2 months for delivery, but considering the current situation, I thought it might take longer. But it arrived earlier than expected and in a little over a month. (By the way, I heard the delivery time differs depending on the color.
When I checked the product I received, it seems to be almost a handmade product, but I have no complaint about the construction It was a good finish, with no results. Tentatively assembled on the vehicle, at least for the NC29, it faithfully reproduces the complex shape of the OEMHose and I was interested.
I actually did the actual replacement of the Hose with Self, but the old Motorcycle Eighty percent of the work for the radiator hose is to remove debris from the coolant that has adhered to the hose, hardened, and seeped through. It was a medium-sized Large strange in Especially Full Cowl's Racer replica is the one where weight reduction and Small Type is the most important. Because it is a large thing, the maintenance is bad, and it had a lot of trouble. Even if it is simply called the replacement work of the Radiator hose, the smallness that accompanies it Packing and Seal should be replaced at the same time, because it is not a workload that can be completed in a short time by a layman. If you don't have confidence or can't get a maintenance space, I think it's better to ask for a PRO.
Assemble it, put in the Coolant, bleed the air, start the engine, and see if there are any operation errors. Check. After confirming that there is no problem, further tests will be done at a later date. We raise the water temperature at high speed and on a congested road, put a load on the WaterLine and check that there are no leaks or seepage. I was relieved to see that the repair work was safely completed after about 300 km of driving, although I was on the edge of my seat.
I can't speak to durability in the long run, but I will continue to regularly check out the Hose Band's If you can manage Torque and check the seams, it seems to work fine. It's really nice that they make old water-cooled Engine motorcycle parts like this. Thanks. I'd like to fix it with the OEM Product if possible, but I'm relieved that I'll be able to keep driving it for the time being.
Well, we tried the Radiator hose from Samco Sports this time, and we have no complaints! It's not the reason.
Price
Although I feel the goodness of construction in the Handmade products, I feel that 40,000 yen for a set of Horse is quite high I did.
Delivery time
It's a handmade product that is manufactured overseas, so I feel like I can't blame you for the month-long wait, but I'll be back in a minute. It was a bit of a shame that it couldn't be repaired in
No Instruction Manual
Replacing the Hose can be done with no problem if you replace the Hose with 1 pc each of similarly shaped Hose, but the NC29 It was even better if there was a lot of hose, because the confirmation process is quite a lot of work. Well, it was not troubled even if there was not.
The above is a long story, but overall I am satisfied with it. We want to. We believe this desire is common to all motorcycle enthusiasts. We have a manufacturer who makes parts for old motorcycles in this way. I can't help but feel grateful for the fact that
View detail
Diverted to GPX750R
I tried to see if it was possible to use the same type of Engine
It was somewhat long, so I cut and adjusted it with Cutter Knife to install it
It would be great if this would solve the cooling water leak
View detail
Fits: YAMAHA MT 25, YAMAHA MT03, YAMAHA YZF R25, YAMAHA YZF R3, YAMAHA YZF-R3, YAMAHA MT03
samco hose clip
samco hose clip, made in England.. that tells you all, the quality of the clips is the highest priority, compared to the high end stainless steel hose clips from Aliexpress these are still much much better. once you screw them up on the samco hoses you will just know how good they are. just, just that i didn't know that only 4 pcs are sent in the package, i guessed the purchase really meant for 4 units but i couldn't find the information anywhere, since there are 3 pcs of samco hoses, it means that I'll have to buy another 2 pcs, so unfortunate. View detail