Reviews
Good to keep it from loosening
I purchased this product for Exhaust System fixed Bolt.
The lock is tight and will not loosen, so it can be used safely in any location where there is vibration.
View detail
SEROW225 WE Blinker used to replace relay.
SEROW225 WE used to replace the Relay for the BlinkerHigh flasher countermeasure. It fits perfectly to the Connector on the car body side, so it can be set back to NORMAL. The quality is satisfactory. View detail
Lightweight Compact
Used with CROSS CUB (JA45).
OEM Helmet holders are hardly available, so we use this Wire and then Helmet holders.
This wire makes the OEMHelmet holder worth using.
View detail
Instead of Washer
It was used as a Spacer when installing GIVI's Carrier.
I usually use a 6mm washer on top of a 6mm washer because it is a hassle to measure the size and prepare a spacer, but since I drop it every time I do maintenance, I replaced it with this product to improve serviceability.
It's just an ordinary Spacer, but it's nice to be able to choose from several sizes and thicknesses, etc.
From a functional standpoint, stacking Washers is sufficient, but this is a good product for those who care about appearance and serviceability.
View detail
Refresh
We replaced it for Refresh to Timing removing Cowl.
There is a feeling of reduced squeaking.
There's nothing wrong with replacing it before it cracks!
The removed items were cured.
View detail
Shipping Adjustment
Purchased to adjust price for free shipping.
Unlike ordinary Tie Wrap, this is a Release type, so it has the advantage of being easily reusable, and we plan to use it for harnesses around lights that are moved a little more frequently.
Quantity:1 Set of 2pcs. so I don't think it is cosmetic. I don't think there is any Merit to buy except for price adjustment.
View detail
The coloring is nice.
Daily commute to work (except when it rains during the workday) Since I have been riding, MORIWAKI's band faded in less than half a year, so I searched webike and found this site.
Branded products since it is a part of the body that is seen every day (TSR and brembo) I thought about using the "K" series, but I decided to go with the "K" series because it is a consumable product that is exposed to rain, wind, & sun.
I was concerned because the KIJIMA products I had worn before were inexpensive but looked a little bad in terms of sewing and appearance, but when I finally received them, I was impressed by their solid construction.
For a while, I used to use Bear's Wrist Band instead, but after a month, the fluff became noticeable and looked bad, but I did not see any such problem with this product after more than a month.
In any case, the MASTERBand is a consumable item, and since it is not expensive, replacement in 3-4 months should be sufficient.
View detail
Thank you for all your help.
I use it all the time.
Thank you again for your assistance.
Sometimes the stock is low at nearby mass retailers, etc., so Webike helps me out in such cases.
View detail
Used for Koken:Mechanical Clutch Holder
What made you decide to buy?
Roller Type Micro Switch used in Koken's Mechanical Clutch Holder to fit 6ROEMClutch switch.
[How was the installation?
Coupler and terminal are Quantity:This is a set of products. I was worried about the attached terminals, so I bought only the spare terminals in case I made a mistake. When you are temporary caulking, it is important to make a good shape of Heart to get a good finish. Also, be sure to check the type of terminals on the female and male side of the coupler, as they differ.
How was your experience with it?
Since it has the same shape as the 6ROEMClutch switch, the clutch switch function can be used simply by removing and replacing the OEMCoupler. (Please check CouplerMale and Female side before working.) It is also recommended because it is the same color, so there is no sense of discomfort.
View detail
Aluminum Collar
I always use Aluminum Collar.
Anodized is also solid.
View detail
Easy BrakeCustomization for NINJARR (Rotor bolt)
[How is it used?
Used for NINJARR
Was the one you received as per Image?
Used for 6 front wheels and 6 rear wheels
Was the installation difficult?
Super easy
How was your experience with it?
Apply Screw lock in the same way as OEM!
[Included Parts:were they on?
Quantity in Single Item because the number of pieces is not enough.:2pc more
[Was there anything that disappointed you?
Where it is used up as well as OEMs.
View detail
Instead of Indicator's Window shade
[How is it used?
PlugWindow shade on YAMAHA XJR400R Indicator? (OEM number:16G-13569-00) Because of the AISCancellation, I had to blind the place where the hose was originally attached, so I used this instead.
How was your experience with it?
The size was a little short in height and the inside diameter was not quite right and a little loose.
The Clip on the Horse was used to prevent it from coming off while driving.
How did it compare to other products?
I finally repurchased the OEM because I was afraid of sucking secondary air due to the thinner Rubber and slightly looser inner diameter compared to the OEM number:16G-13569-00. However, I had no problem using it as a substitute.
[Points to note]
The inner diameter is loose and must be stopped with a Clip or inHemp palmock.
View detail
Convenient
The size of the terminal is the same as that of the Ignition terminal, but for those who want a plain type terminal of this size with a sleeve, it is easy to use with a small amount and no waste. View detail
Extremely convenient
You can fix a Cable of any kind anywhere as long as there is an M6 hole.
This product may not be necessary for OEMMotorcycle, but it is an itch product for Custom vehicles.
However, it is not strong enough to hold a moving object like a Clutch Cable or Brake Cable in place. It is only for bundled wiring.
View detail
Used as Spacer for Exhaust System
When I buy a used external exhaust system, it may not have the spacer or bolt I need, so I buy it when I need it. It is very helpful that there are various sizes. View detail
Purchased to replace Oil
[How is it used?
Bought this to replace oil on my PCX125, used it between drain bolts to seal them.
How was your experience with it?
It was Exactly 12mm! It was a size larger than the Washer that was originally used, but it worked fine. I don't know about durability, but I don't need to buy more for the time being since there are several in the package.
I will make sure to change it every time when I change Oil.
How did it compare to other products?
[Points to note]
It comes in a lot, so if you think you don't need that much, you may prefer other products. However, it is a consumable product, so I don't think it would be a problem to have a lot of it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
For places where you don't want to stand out.
This is the best choice for a washer in an inconspicuous location.
It is inexpensive and safe to use.
View detail
Different colors!
Functionally, there is no problem, but the color of the terminal is different between the picture shown on the website and the actual product received!
The photo shows Silver, and the received item is Gold!
I wanted to be inconspicuous and bought it because it was Silver….
View detail
To M8 with M10 color
I wanted to use the Exclusive Aluminum Spacer for M10 Screw Collar from the same K-CONBrand with M8 Bolt.
These itchy parts are very helpful.
Surprisingly, there are no conversion parts like this.
View detail
Used for adjusting the width of Handlebar.
[How is it used?
The XJR1300C, which had to be inspected, was missing a handlebar width of about 10 cm, so we used four of these collars to pass the inspection.
The idea came from the Handlebar Spacer for the Z900RS from ARCHI.
Was the one you received as per Image?
It was just the right thickness, I wanted more than 22.2mm.
How was your experience with it?
Quantity:Pair (for Left and Right) To Quantity:2pc. Set by Set, and finally fixed at the Bar End of Babyface.
The inspector did not point out any particular problem, and the vehicle passed without incident with the width as stated on the inspection certificate.
View detail