Reviews
Replace from attached terminal
[How is it used?
The terminal attached to GALE SPEED's Clutch holder is Straight Type
It looks ugly as it is (see photo 1), so I was wondering if there is anything better.
I was looking for it and found this!
Was the one you received as per Image?
It was exactly as pictured, nothing different.
Was the installation difficult?
Just pull it out and replace it.
Terminal to terminal connections can be made without problems with crimped pliers and a little bit of skill.
How was your experience with it?
Looks much better (see photo 2).
If you don't care, you won't care.
If you're going to mess with Motorcycle, you want the details to look nice and cool.
The terminals that come with the Parts are perfectly functional, though.
Recomendation because just a little bit of time and effort will improve the appearance of the product.
A terminal is just a terminal, but if a single terminal can change the appearance so much, it is worth replacing it.
[Included Parts:were they on?
None, just terminals and cords.
[Was there anything that disappointed you?
None in particular,
View detail
To stop Rust.
XSR900 has bolt holes for carriers? I didn't want the bolt holes to rust, so I put them on.
Gold in casual places is nice.
View detail
A friend of old cars?
I'm not sure about current vehicles, but this is a common two-turn Bullet Type Terminal on older vehicles.
I get the impression that there are a lot of them, especially around Tail.
View detail
Wire Fixing
It is 1m short for wiring. This time I bought it for fixing to suppress wobble of change shift which is a chronic disease of GB250 CLUBMAN. 0.57mm is just right and 0.6mm is not enough to fit in the gap of change shift, so I could not wrap it. I am worried that it will break, but it is a first aid measure, so I would like to see how it goes. View detail
For additional Wiring
I found an article that the Bullet Type Terminal for Motorcycle is slightly different in size, and it seems that it is not Exactly fitted to A0 products, so I bought one to try it out.
I do think it's harder to pull off than A0.
Why would they change the Size?
And I didn't know there was a difference even among MotorcycleManufacturers.
It's an essential component for safe Wiring processing.
View detail
Vibration prevention
It is a re-purchase to attach to the Spring part used for the ChamberFlange part at the time of maintenance.
The product is not bad, but it would be helpful if the price per pc. was a little lower.
View detail
One of the best items I've purchased!
I am glad I purchased this product because it is stronger than the typical Magic tape.
I used it to reinforce the inside of my helmet and also attached it to my speaker.
Since it is Magic tape, it can be used for a variety of purposes!
View detail
exchange
The connection connector of the main power supply was old, and its removal and installation was strange.
TAB, receptacle, and Terminal Set, so it is much easier to remove and install with the new replacement.
View detail
Reflector should be attached.
I had a Fender Eliminator on my Axis Treat and cut the bracket that mounts the OEMReflector under the Number, so I stuck this product on the rear bracket part of the Pillion Bar of the Wills WIN.
The size is just right and the quality seems to be durable, unlike the ones sold in the 100s.
The double-sided tape provided with the product is a very strong adhesive, so it is best to position it firmly before attaching.
View detail
Outside of Motorcycle.
There are many kinds of RepeatThailand products on the market, including cheaper ones, but this one is easy to release and use.
I would like to see a variety of lengths available.
View detail
There are many different sizes.
You don't need impressions.
You will get Points, so please stay with us.
[How is it used?
Silencer BracketI just wanted to let it out a little.
Was the one you received as per Image?
And I've seen the actual thing at Image itself Naps.
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
That was great.
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
View detail
Older Vehicles on Rubber PartsReplace
[How is it used?
old car (SportsCUB) Used to attach to 6V MONKEY/GORILLA Main Harness at Restore of
Was the one you received as per Image?
Measure the OEM's size in advance and arrange for the closest size.
As a matter of course, I received exactly what was described in Size.
How was your experience with it?
It is a very ordinary ConnectorCover, so it's neither too good nor too bad.
Since different sizes are lineuped, it is nice to be able to choose a close size when replacing parts that are no longer available.
View detail
This is for Bullet Terminal of HondaSmall Type car.
[How is it used?
old car (SportsCUB) Used in Restore of
Was the one you received as per Image?
The Sleeve is also thick and easy to use.
Cheaper ones are usually available, but I would choose this one for its quality of workmanship.
Was the installation difficult?
Electric Works Pliers can be attached if available.
It is no different from a normal Size Bullet Terminal.
[Was there anything that disappointed you?
While not disappointing, it would be better if there was also a Package with a slightly larger quantity and less expensive pricing.
View detail
I can rely on them in times of need!
The Bolt of the Brake Caliper was rusted, so it was Refreshed with KITACOConvenienceParts (M8×40 P1.25).
The Caliper used is a YamahaOEMbrembo.
Since I could not search the OEM Parts List (no parts appeared), I first tried to remove one from Caliper, measured the Bolt size standard with Caliper, and then searched and purchased the Bolt with WeBig.
The torque for installation was measured beforehand with a KTC digital ratchet and was approximately 50 Nm, so it was tightened accordingly.
KITACOConvenienceParts is a great help when you have an itch or need help.
It's just a small part, but I'm glad it's clean!
View detail
For repairing faulty wiring View detail
Oil cooler fixtures
When installing the UniversalOil cooler, I wanted to install the included hose, but the One Side can only be installed by cutting the Pipe, and the companion of the included hose is a Crimp, so I tried my best to modify it, but it was impossible, so I changed the hose to a Rubber type. I tried to modify the hose but it was impossible, so I decided to change the hose to a rubber type.
I also wanted to install an oil temperature sensor on the Meter, so I bought this one after much deliberation.
We changed to HoseType, so the length and handling are now free.
It works normally
It is difficult to say "normal" because normal use is a matter of course, but the quality has to be good.
I can buy the quantity I want as a Single Item and it is Reasonable. I hope you will continue to offer products like this in the future.
View detail
For UniversalMeter installation
In replacing the Meter with KOSO's Multimeter, we did not want to damage the harness on the body side, so we purchased a 110-type 9-pole and 3-pole Coupler and made an intermediate harness so that the new Meter could be detached with the Coupler.
The product was a perfect fit, the terminals were solid, and the product was safe to use. The coupler is compatible with the coupler attached to the harness on the body side of the car without any problem, and it can be attached and detached smoothly.
I think it was a bit of a waste since I only used One Side, but I will keep the extra one in a Large Cutout until I need it some other time.
View detail
Low Torque Location
Material:The aluminum anodized parts were about to be bald, so I inserted them between the parts.
It's just right to use it on Cowl for scratch protection.
It's a very solid object.
View detail
Replace each time when replacing Oil
I purchased the washer for the drain bolt part because I was told that it should be replaced as needed when changing the oil.
OEM Product may be correct, but Other Brand Product is easier to procure, and since it is only a washer, there is not much difference between the two.
View detail
Performance and price are sufficient for your needs.
[How is it used?
Used to disassemble and clean the rear master cylinder of a YAMAHA XJR400R.
How was your experience with it?
Nothing is impossible.
I believe that the basic performance of these products will remain the same.
How did it compare to other products?
This item is 1 bagQuantity:1 Set of 2pcs. but other products are available in Large quantity and cheaper.
However, DailyMechanic like me only uses it occasionally, so I think this one is sufficient.
[Points to note]
If Torque management is not done properly, Brake fluid will leak and ooze, so be sure to do it properly.
View detail