Reviews
Length and Working Space
We needed to change the Bolt that holds the Exhaust System in place, so we went with this one.
I would have been happy with one, but it's not perishable, so I'll keep it in the Screw box in case I use it someday.
View detail
I made a mistake in the size and couldn't use it, but I'm making it Stock.
[How is it used?
Generator fixed bolt from Nabe Screw during EngineO/H of YAMAHA/TZr50R.
I bought this one with the intention of replacing it.
The result was not usable because of the wrong Size, but we are using it as a Stock for something else.
How was your experience with it?
I think the quality is good enough.
How did it compare to other products?
I don't have anything to compare it to, but I wonder if the price is higher than Home centeretc.
There are many types of this kind of products, so it is easier to find them on Net.
[Points to note]
nothing special
View detail
For mounting bolt on Generator cover
I bought it for mounting bolt of Generator cover of CUB series Engine.
The bolt under the Left is the same length, but the main reason I purchased this bolt is because the OEM bolt here is stuck in the back, so it is difficult to insert the tool.
View detail
It's good.
It is available at most motorcycle supply stores.
Parts replacement, etc.
I replace them when the dimensions change, etc.
View detail
I can rely on them in times of need!
The Bolt of the Brake Caliper was rusted, so it was Refreshed with KITACOConvenienceParts (M8×40 P1.25).
The Caliper used is a YamahaOEMbrembo.
Since I could not search the OEM Parts List (no parts appeared), I first tried to remove one from Caliper, measured the Bolt size standard with Caliper, and then searched and purchased the Bolt with WeBig.
The torque for installation was measured beforehand with a KTC digital ratchet and was approximately 50 Nm, so it was tightened accordingly.
KITACOConvenienceParts is a great help when you have an itch or need help.
It's just a small part, but I'm glad it's clean!
View detail
No complaints except CenterGap.
I used it on the Handlebar Clamp of my Bonsai Motorcycle. The part where the Hexagonal Wrench is inserted is gapped from the center, but there is no rattle at all, so it can be tightened firmly with Torque. I think it is a good cost performance to replace the rusted bolt as it gets rusty. View detail
Not in Homsen And Quantity:1 Set of 2pcs.
I bought this to fix the Headlight to the Bracket. You can't find this kind of thing at a home improvement store.
The texture was rough to the touch, so Grease was properly applied and fixed.
Motorcycle shops are a bit far away, so I am grateful to webike for offering this kind of thing.
View detail
4LMONKEY
4LMONKEYHeadlight case in place of the 6Kaku Bolt8X20 is a fashionable purchase. View detail
MONKEYTop bridge
Used for the bolt of MONKEYTop bridge. This is definitely usable. View detail
A lifesaver in times of trouble!
[How is it used?
During a month-long long-distance touring with FZS600, one of the bolts holding the RightFootpeg Plate fell off or was lost while driving about 2000 km after departure (tears). It was a holiday weekend in May, and all the motorcycle shops were closed, so I was at a loss. In the shelves, I found the Bolt I was looking for! Cap Bolt with FlangeM8x20 P1.25 The M8 Bolt was sitting in a brilliant halo (our Image)! I felt as if I had used up all the luck in my life at that time. (Laughs) Home center also sells M8 Bolt, but most large ones are P1.5, and P1.25, which is often used for motorcycles, is rarely sold.
Was the installation difficult?
The kind and beautiful lady clerk at 2 Rinkan (our Image) lent me a tool and I was able to install it quickly and easily.
How was your experience with it?
It's the same Bolt as the OEM, so nothing has changed, but it has filled my heart! (LOL)
[Was there anything that disappointed you?
There's not a ton of demonstration that I'm not disappointed! I can't sleep with my feet facing 2 Rinkan and KITACO anymore! (LOL)
Other items that would be helpful
Opinions and requests for Manufacturer:KITACO! Thanks for all your help! And 2 Rinkan too! (Sorry, Mr. We-Big!)
View detail
For a little Fashion
Used as License Plate Bolt.
It's good for a little Fashion when you don't want to be flashy.
It gives a slightly more luxurious feel than OEM.
View detail
Replace OEM Product with Cowl Retention Up!
This product can be replaced with the OEM Product to increase the Cowl's holding power. It has a larger pressing area, so it is more resistant to Chatter, etc. View detail
K-CON is really a Convenience ence w
[How is it used?
I used it with K-CON's Aluminum spacer to Offset D Tracker's Silencer to the outside.
Was the one you received as per Image?
Since M10Size Bolts are generally sold with Pitch 1.5, they are not sold at local home centers, and K-CON is really convenient in selling M10 Bolts with Pitch 1.25 from a single bolt. However, if you buy only one Bolt, the shipping cost is ridiculous, so it is better to buy it in combination with other products.
How was your experience with it?
The Hexagonal Wrench is also inserted without any rattling and can be firmly rotated with the Torque.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Opinions and requests to Manufacturer:It would be helpful to have more Variation of Bolt length.
View detail
Cheap and light
After searching for a light Type SteelBolt, I purchased this product.
The Bolt on the Crank Case Cover was not looking good, and we searched for a cheap and light SteelBolt.
I considered Stainless Steel, but rejected it due to concerns about electrical corrosion and gnawing on the Screw Mount.
I thought about AnodizedAluminum and Titanium, but I reThailandia for Gold sen.
I know Titanium is good in the long run, but it is expensive.
So I decided to go with SteelBolt, although I am sorry to say that it is only available in lengths up to 50mm.
I measured 10mmBolt and SHSteelBolt with M6X45mm with a scale.
NORMALFlange bolt approx. 30g
KITACOSHSteelBolt approx. 25g
It was
The next question is how durable it will be.
View detail
You won't find it in a mass market Spec.
I needed an extension of the OEM bolt to secure the bracket to the front fender's fixed bolt, the OEM has hex holes but I wanted a bracket with a flange to secure it and I found this one.
I had never seen a Flange bolt with a hex hole, so I bought one.
It is a Flange bolt as a function, but I thought it could be seen as a high design depending on how you use it.
View detail
Size not available in Home center.
I bought this product because the tools used in Bolt such as Home center are different. I am able to work efficiently now. View detail
Used for cotightening
[How is it used?
Used to fasten the Side bagBracket and Other Brand Product's Rear Carrier to the Club bar on the VFR800.
The Bolt that comes with each of them is OK if it is only one of them, but I used this one because I needed a very long Bolt when I combined them.
I also avoided the normal Cap bolt as the Bolt head stands out and went with this one.
Was the installation difficult?
Bolt is just Bolt, so it's not difficult.
In my case, I had a hard time aligning the 4 Parts because they were co-tightened.
(Club bar, Collar, Rear Carrier, Side bagBracket)
How was your experience with it?
I'm very satisfied with the look of the Bolt head.
View detail
Conversion to Button cap bolt with Flange (Part 3)
This is the replacement of Frame coverMounting Bolt.
Normal is CS Plus screw with 16mm screw length + Lock washer + Large diameter washer.
Plus screw + Large diameter Washer made of SUS with 15mm screw length by Differential Gearォ of the shop which always asks for it now.
I decided to use FlangeButton cap + Large diameter Washer to match the Bolt conversion around it, but I chose 20mm because 15mm is too short.
Now, if you can manage the Plus screw of Air Chamber/Air cleaner connected DuctBand, you can do Access to Battery and Tank removal only with 4mmHEX.
View detail
Conversion to Button cap bolt with Flange (Part 2)
The seat hook fixed bolt is replaced.
Screw length 12mnm, Normal is still CS hex head Bolt + Lock washer + Washer.
Now, it's a SUS Hexagon Socket Bolt + Washer at the Defferential Gearo shop that I always ask for.
Cap bolt with flange is used here to match with the screw around it.
It is a Bolt with a wide seat Flange, so Washer reduction was achieved.
View detail
Conversion to Button cap bolt with Flange (Part 1)
It is the replacement of the mounting bolt of the air cleaner box.
Screw length 20mm, Normal is CS hex head Bolt + Lock washer + Washer.
Now, it's a SUS Hexagon Socket Bolt + Washer at the Defferential Gearo shop that I always ask for.
This Washer diameter was small, and it was bothered by the feeling of biting into the resin material of Air cleanerBox.
The purpose of this product is to reduce the number of parts and to hold the Air cleanerBox resin firmly by using only Button bolt with wide flange on the seat.
It will be 4mmHEX from 5mmHEX of Mr. Shop's Defferential Gearo, but it is not a place to tighten tightly, so it is enough.
View detail