Reviews
Fixing Screw
I bought it to try it out, wondering if it could be used to fix Cowl. The materialAluminum was nice, but the tapping screw and the length of the screw seem to limit its use.
It would be helpful if you could sell regular Screws, available in a choice of lengths.
View detail
Bolt replacement for MirrorOffsetHolder
Currently, I am using the low type of DAYTOMA's Hi-Viz Mirror and the shorter version of Tanax's Mirror Offset Holder. It is not impossible to fasten the OffsetHolder with other items, but it was not good for my mental health, so I decided to replace it.
However, I have never seen a 1.25 cap bolt, which is often used for motorcycles, at a home center, and I have to order one from a shop specializing in screw bolts by mail order. You have to order from a shop specializing in screw bolts by mail order, or buy from KITACO or Posh. In this case, I only needed to purchase two bolts, and since I did not have any other bolts or nuts that I needed, and since I was not Timing for bulk purchases, I chose KITACO's products instead of ordering from ScrewShop because of the shipping cost. I wanted a black one, if possible, so I hesitated between a black one and a black one from Posh, but I decided to buy a KITACO product because it was a little bit cheaper. The bolt itself is a good product that can be used normally without any problem, but I think the price is too expensive.
By replacing the Bolt with a 5mm longer Bolt, the Bolt is now firmly in place and secure. We recommend replacing the bolt with a new one if you have similar concerns.
View detail
Screw Change
The Rear Sets mounting position was changed, and since the Spacer was changed, the Fixing Screws were changed.
Rust resistant Material:Stainless Steel, the length was just right to secure it.
View detail
Stainless bolt
The installed screws were not stainless steel, but old, so we replaced them with rust-resistant stainless steel screws.
Screw size, type and what I needed was helpful because I could choose what I needed.
View detail
Stainless bolt
The bolt installed was not stainless steel, so it was changed to this stainless steel to prevent rusting.
The look and feel of this Stainless Steel has become a good feeling.
View detail
On License Plate Bolt
I wanted to put a round Sticker on the License Plate Bolt, and I'm glad I found just the right one. View detail
Package for additional purchase
I don't have a little Bolt! It would be convenient if there is a home center or a gold shop nearby that sells bolts in bulk, but it's not always easy.
I'm lucky to be able to buy it at Site, but I don't think it's very cosy because there are so few of them.
Plating is regular Uniqlo. I use it on the parts that get rusty, but it seems to have a thicker coating than the cheapest product because no rust comes up in about 2 months.
However, the one I installed on my exhaust pipeCover was covered in rust within a month. In high temperature environment, it will be damaged just like other Bolt.
View detail
No particular feature
It's a very ordinary Uniqlo plating Bolt.
You can choose Pitch, so be careful not to make a mistake.
In my case, the fixed bolt of Silencer had disappeared before I knew it, and I bought it hurriedly as a replacement, so I was satisfied if the pitch was right. If I say a detailed point, when I buy the same etc. goods of Uniqlo plating at Home center etc., because it is about 1 pc50 yen, it is rather expensive.
The surface treatment is very strong and there is no rust on the surface after one month of installation.
It's an unadorned Bolt, but if you're not particularly particular about it, there's no harm in buying it along.
View detail
Choose where to use it.
Because the bolt of Exhaust Cover was gone, I replaced it.
It is an ordinary Bolt, but because the unit price is higher than the one sold in bulk in the Home Center, the place where the cosmetology is delicate.
Also, due to the limitations of Uniqlo plating, it oxidized quickly in places where high heat is applied, such as the exhaust system, and it rusted after about six months.
In terms of quality. Normal . Depending on the mounting point, it's the worst, so you need to use it differently from Stainless.
View detail
Can be installed without a washer
I bought it with Meter's fixed Bolt.
Because it is sandwiched between Rubber, it will come off if you don't put a Washer on the Bolt.
I bought it because you can use the Flange bolt to install it with less washer.
It's useful because you can install it on the Smooth without dropping the Washer because it's a hard-to-reach spot.
View detail
The hexagon on the plate isn't a surprise!
You won't find the plate Screwle's hexagon head in Home Center! Even if there is, it's a Plus.
The plate screw is often used for Rear Sets.
View detail
It is safe to use
I was once told by a motorcycle shop that the Stainless bolt on the home center is like a furniture fixture and should not be used on a motorcycle.
Especially the Caliper Mount Bolt, the undercarriage and the engine area are said to be NG.
There are different materials, formulations, and methods of production that can be used for Motorcycle. Please use special products.
View detail
Required Size
Sometimes the size you need is not available in Home center.
When it comes to the KITACOConvenienceParts, you'll find a bolt that's just right for you, with a line up of diameters, lengths, pitches, and sizes specific to motorcycles.
View detail
Useful for forgetting to buy.
You can also buy Bolt and other items at Home Center, but if you forget to buy them, use K-CON KITACOConvenienceParts.
You can also check the size so it's easy to buy.
It also helps to have it in stock.
View detail
Useful for forgetting to buy.
You can also buy Bolt and other items at Home Center, but if you forget to buy them, use K-CON KITACOConvenienceParts.
You can also check the size so it's easy to buy.
It also helps to have it in stock.
View detail
Useful for forgetting to buy.
You can also buy Bolt and other items at Home Center, but if you forget to buy them, use K-CON KITACOConvenienceParts.
You can also check the size so it's easy to buy.
It also helps to have it in stock.
View detail
It's easy to choose.
These bolts are hard to find at Home center, but K-CON KITACOConvenienceParts makes it easy to choose a size.
It would be great to have everything in stock.
View detail
Aluminum only...
The company. I use it when the Screw hole part of M4 use part of the same color spreads out. There are no enemies to install and remove many times... Since the material is softer and will immediately color out, I think it would be nice if there were color variations at Stainless Steel. Because it is easy to scrape off or color off immediately even with just one tightening, care must be taken not to overload the Torque with the definite + Driver at the tip.
View detail
Company superfootrest (ﾌﾞﾗｯｸ) To install.
The company's Super footrest (Black) Purchase to install.
Screw attached to Super footrest is Stainless Steel (Silver) So, I do not want to make it stand out so I bought Black of the same color as Super footrest.
I think there is a discoloration because it is a footpeg part. (It's good not to rust... ) It would be nice if there was a thing of Stainless Steel's Black Plating, but KITACO would give out of it at the moment.
When the Step Board's ScrewScrew hole is stupid "M5" Of Screw (Black) Also purchased at the same time. As I think that it fade quickly, "Three stars" is.
View detail
Bolt for RADIAL CALIPER
Pitch is 1. 25, M10 I searched for Bolt with Length 70 mm in the nearby Home center, but I could not find it and found it on Webike. 1. 25Pitch seems to be Bolt to make Motorcycle and for Vehicle easier to loosen, and it seems that it is not selling so much at Home center.
I also looked for a screw shop, but I could not go on weekdays quite, so it was very convenient to be able to purchase it with Webike like this. Bolt of Motorcycle is convenient to buy on the Internet!
View detail