Reviews
To Cowl.
I used it to fix Cowl.
It can be used if the hole diameter and depth match.
View detail
Package for additional purchase
I don't have a little Bolt! It would be convenient if there is a home center or a gold shop nearby that sells bolts in bulk, but it's not always easy.
I'm lucky to be able to buy it at Site, but I don't think it's very cosy because there are so few of them.
Plating is regular Uniqlo. I use it on the parts that get rusty, but it seems to have a thicker coating than the cheapest product because no rust comes up in about 2 months.
However, the one I installed on my exhaust pipeCover was covered in rust within a month. In high temperature environment, it will be damaged just like other Bolt.
View detail
For Exhaust Spring
It is a purchase for the Spring part of the Exhaust System part for vibration prevention.
It's just a Rubber tube, but I couldn't find a better one, so I gave it a try.
Looks normal, price wise I wish it was cheaper.
View detail
It's better to keep it covered.
The CLRExhaust pipe of Mr. KFACTORY is installed, and when the silencer part is fixed with the exclusive aluminum exhaust bracket, it shakes by idling and the exhaust spring is shaken by vibration, so I bought it and covered it. The vibration sound of the exhaust system itself remained a little, but because the vibration sound of the spring almost disappeared, it is good.
I think it is useful because it can prevent the Spring from being broken by the vibration even if it is only put on.
View detail
Variation
I purchased this product to replace the carburetor OH and surrounding hose on my SEA BASSDF200 DJEBEL because it saved me a lot of time and effort compared to picking up OEM parts one by one and I could use the extra parts on my other motorcycle. I'm glad I did because I've used them on other motorcycles. View detail
DF200 DJEBEL
The tank cap rubber on my DF200 DJEBEL was deteriorating and I was looking for an OEM one, but it was only sold like a set of keys, so I bought this one to try. It was perfect with thin rubber. It was good. View detail
Air filter for agricultural machinery
I use it as an air filter for agricultural machinery without using it for Motorcycle. It is sufficient performance. View detail
No particular feature
It's a very ordinary Uniqlo plating Bolt.
You can choose Pitch, so be careful not to make a mistake.
In my case, the fixed bolt of Silencer had disappeared before I knew it, and I bought it hurriedly as a replacement, so I was satisfied if the pitch was right. If I say a detailed point, when I buy the same etc. goods of Uniqlo plating at Home center etc., because it is about 1 pc50 yen, it is rather expensive.
The surface treatment is very strong and there is no rust on the surface after one month of installation.
It's an unadorned Bolt, but if you're not particularly particular about it, there's no harm in buying it along.
View detail
Used for KDX125SR
I used it to install the side cover on my KDX125SR, and I'm grateful that I don't need a Flat Washer because the Button area is so large. The only drawback is that the Allen Wrench is shallow, so if you use it on a part that is removed many times, the part where you insert the Wrench is easily licked. View detail
A convenient bracket that can be used for various purposes.
I'm very happy to have this product because this type of bracket is not sold at home center.
The large size of the hole is M8, so it is convenient when installing an external blinker.
It is made of Stainless Steel, which has a high texture and is resistant to Rust.
Recommendation
View detail
It is a good item
I used it as a Bolt for Exhaust Band.
Gold color is One point and I like it.
Durability is unknown as I just put it on, but the Hexagonal Wrench used during installation did not cause the Plating to peel off.
View detail
Choose where to use it.
Because the bolt of Exhaust Cover was gone, I replaced it.
It is an ordinary Bolt, but because the unit price is higher than the one sold in bulk in the Home Center, the place where the cosmetology is delicate.
Also, due to the limitations of Uniqlo plating, it oxidized quickly in places where high heat is applied, such as the exhaust system, and it rusted after about six months.
In terms of quality. Normal . Depending on the mounting point, it's the worst, so you need to use it differently from Stainless.
View detail
Plating is nice and thick.
The Bolt on the Handlebar Post was rusty and dirty, so I went with Stainless Steel.
I've changed it well, especially with no problems with accuracy or length.
Stainless Steel also rusts depending on how you use it, but it doesn't particularly float with rust on my Motorcycle, which I've been bruising for about two years, and the surface treatment seems to be good.
Handlebar Post is where you'll see it at all times, so you want to use components that shine like a bizzare.
View detail
Design is good, but it's expensive.
I bought these because I changed the Front Discs to 300mm & rarr;320mm and I needed to extend the bolts on the normals by 10mm. It is very solid and I like the design. But I think it is a bit expensive (because it is 4 pieces). View detail
If you don't know the Size, use the Quantity:Buy Set
There was a part where I wanted to use the Beta pin, but I didn't know the Size, so I used the Quantity:I bought it in Set. It's a waste of money because I don't use all sizes, but I did it this way because it's better than buying again because the size doesn't fit.
Leave the unused Beta pins in the Screw box as stock.
View detail
GOOD
The one sold at home center is also good enough, but this one is better when I think about the texture. 。 View detail
Home center better
The one sold at home center is also good enough, but this one is better when I think about the texture. 。 View detail
Can be installed without a washer
I bought it with Meter's fixed Bolt.
Because it is sandwiched between Rubber, it will come off if you don't put a Washer on the Bolt.
I bought it because you can use the Flange bolt to install it with less washer.
It's useful because you can install it on the Smooth without dropping the Washer because it's a hard-to-reach spot.
View detail
The hexagon on the plate isn't a surprise!
You won't find the plate Screwle's hexagon head in Home Center! Even if there is, it's a Plus.
The plate screw is often used for Rear Sets.
View detail
It is safe to use
I was once told by a motorcycle shop that the Stainless bolt on the home center is like a furniture fixture and should not be used on a motorcycle.
Especially the Caliper Mount Bolt, the undercarriage and the engine area are said to be NG.
There are different materials, formulations, and methods of production that can be used for Motorcycle. Please use special products.
View detail