Reviews
Length and Working Space
We needed to change the Bolt that holds the Exhaust System in place, so we went with this one.
I would have been happy with one, but it's not perishable, so I'll keep it in the Screw box in case I use it someday.
View detail
I made a mistake in the size and couldn't use it, but I'm making it Stock.
[How is it used?
Generator fixed bolt from Nabe Screw during EngineO/H of YAMAHA/TZr50R.
I bought this one with the intention of replacing it.
The result was not usable because of the wrong Size, but we are using it as a Stock for something else.
How was your experience with it?
I think the quality is good enough.
How did it compare to other products?
I don't have anything to compare it to, but I wonder if the price is higher than Home centeretc.
There are many types of this kind of products, so it is easier to find them on Net.
[Points to note]
nothing special
View detail
Step up from SteelScrew!
[How is it used?
Screw was replaced with external Fender, so Screw was changed from Steel to Material:Replaced with Stainless Steel.
Was the one you received as per Image?
Quality is as good as the Image.
Was the installation difficult?
Installation is easy as the SteelScrew is simply replaced.
How was your experience with it?
Fender is often exposed to moisture, so the replacement was made in consideration of durability, but it can be used without worrying about rust, so it is a sense of security.
[Included Parts:were they on?
No other than Screw.
[Was there anything that disappointed you?
The NORMAL Screw is slightly rounded, but this is a dish Screw, so the shape is slightly different.
▼I'm afraid of biting, but I think it is better than Steel rusting.
View detail
For mounting bolt on Generator cover
I bought it for mounting bolt of Generator cover of CUB series Engine.
The bolt under the Left is the same length, but the main reason I purchased this bolt is because the OEM bolt here is stuck in the back, so it is difficult to insert the tool.
View detail
It's good.
It is available at most motorcycle supply stores.
Parts replacement, etc.
I replace them when the dimensions change, etc.
View detail
To stop Rust.
XSR900 has bolt holes for carriers? I didn't want the bolt holes to rust, so I put them on.
Gold in casual places is nice.
View detail
I can rely on them in times of need!
The Bolt of the Brake Caliper was rusted, so it was Refreshed with KITACOConvenienceParts (M8×40 P1.25).
The Caliper used is a YamahaOEMbrembo.
Since I could not search the OEM Parts List (no parts appeared), I first tried to remove one from Caliper, measured the Bolt size standard with Caliper, and then searched and purchased the Bolt with WeBig.
The torque for installation was measured beforehand with a KTC digital ratchet and was approximately 50 Nm, so it was tightened accordingly.
KITACOConvenienceParts is a great help when you have an itch or need help.
It's just a small part, but I'm glad it's clean!
View detail
Fixing Screw
I bought it to try it out, wondering if it could be used to fix Cowl. The materialAluminum was nice, but the tapping screw and the length of the screw seem to limit its use.
It would be helpful if you could sell regular Screws, available in a choice of lengths.
View detail
Bolt replacement for MirrorOffsetHolder
Currently, I am using the low type of DAYTOMA's Hi-Viz Mirror and the shorter version of Tanax's Mirror Offset Holder. It is not impossible to fasten the OffsetHolder with other items, but it was not good for my mental health, so I decided to replace it.
However, I have never seen a 1.25 cap bolt, which is often used for motorcycles, at a home center, and I have to order one from a shop specializing in screw bolts by mail order. You have to order from a shop specializing in screw bolts by mail order, or buy from KITACO or Posh. In this case, I only needed to purchase two bolts, and since I did not have any other bolts or nuts that I needed, and since I was not Timing for bulk purchases, I chose KITACO's products instead of ordering from ScrewShop because of the shipping cost. I wanted a black one, if possible, so I hesitated between a black one and a black one from Posh, but I decided to buy a KITACO product because it was a little bit cheaper. The bolt itself is a good product that can be used normally without any problem, but I think the price is too expensive.
By replacing the Bolt with a 5mm longer Bolt, the Bolt is now firmly in place and secure. We recommend replacing the bolt with a new one if you have similar concerns.
View detail
No complaints except CenterGap.
I used it on the Handlebar Clamp of my Bonsai Motorcycle. The part where the Hexagonal Wrench is inserted is gapped from the center, but there is no rattle at all, so it can be tightened firmly with Torque. I think it is a good cost performance to replace the rusted bolt as it gets rusty. View detail
Not in Homsen And Quantity:1 Set of 2pcs.
I bought this to fix the Headlight to the Bracket. You can't find this kind of thing at a home improvement store.
The texture was rough to the touch, so Grease was properly applied and fixed.
Motorcycle shops are a bit far away, so I am grateful to webike for offering this kind of thing.
View detail
4LMONKEY
4LMONKEYHeadlight case in place of the 6Kaku Bolt8X20 is a fashionable purchase. View detail
Screw Change
The Rear Sets mounting position was changed, and since the Spacer was changed, the Fixing Screws were changed.
Rust resistant Material:Stainless Steel, the length was just right to secure it.
View detail
K-CON Cap Bolt M6 (Stainless Steel)
About quality and texture The quality is good and the packaging About the feeling of use The quality was good, and there was no problem installing it Products to buy together m6 nut, M6 Washer Difficulty of installation easy Cost performance and comparison with other products About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought it for use under various circumstances, but I installed it in the place where the linker moved and I am satisfied View detail
K-CON Hexagon Bolt With Flange
About quality and texture The quality is good and the packaging About the feeling of use The quality was good, and there was no problem installing it Products to buy together m8 nut, M6 Washer Difficulty of installation easy Cost performance and comparison with other products About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought it for use under various circumstances, but I installed it in the place where the linker moved and I am satisfied View detail
Stainless bolt
The installed screws were not stainless steel, but old, so we replaced them with rust-resistant stainless steel screws.
Screw size, type and what I needed was helpful because I could choose what I needed.
View detail
Stainless Steel
Fixing Screw is replaced with Stainless Steel.
It is now rust-resistant and looks great.
It was helpful to be able to choose the Size and length.
View detail
Stainless bolt
The bolt installed was not stainless steel, so it was changed to this stainless steel to prevent rusting.
The look and feel of this Stainless Steel has become a good feeling.
View detail
MONKEYTop bridge
Used for the bolt of MONKEYTop bridge. This is definitely usable. View detail
It is used for the circumference of the crankcase of the monkey. Brightness peculiar to a stainless is perfect for the generator cover of a takegawa.
It is used for the circumference of the crankcase of the monkey.
Brightness peculiar to a stainless is perfect for the generator cover of a takegawa.
View detail