Reviews
I don't know if it will fit, but I bought it anyway.
I don't know if it will fit, but I bought it anyway. View detail
I like the stuff, but I didn't need it for crf250rally….
Purchased when replacing crf250rallyBlinker
Rear blinkerMinus side connector is not the same shape as the light blue or Orange one, so I thought I could use it on the Plus side,
The Minus side is not sold at KITACOConvenienceParts, so it must be purchased at another electrical shop.
View detail
Wire Fixing
It is 1m short for wiring. This time I bought it for fixing to suppress wobble of change shift which is a chronic disease of GB250 CLUBMAN. 0.57mm is just right and 0.6mm is not enough to fit in the gap of change shift, so I could not wrap it. I am worried that it will break, but it is a first aid measure, so I would like to see how it goes. View detail
exchange
The connection connector of the main power supply was old, and its removal and installation was strange.
TAB, receptacle, and Terminal Set, so it is much easier to remove and install with the new replacement.
View detail
For UniversalMeter installation
In replacing the Meter with KOSO's Multimeter, we did not want to damage the harness on the body side, so we purchased a 110-type 9-pole and 3-pole Coupler and made an intermediate harness so that the new Meter could be detached with the Coupler.
The product was a perfect fit, the terminals were solid, and the product was safe to use. The coupler is compatible with the coupler attached to the harness on the body side of the car without any problem, and it can be attached and detached smoothly.
I think it was a bit of a waste since I only used One Side, but I will keep the extra one in a Large Cutout until I need it some other time.
View detail
Shipping Adjustment
Purchased to adjust price for free shipping.
Unlike ordinary Tie Wrap, this is a Release type, so it has the advantage of being easily reusable, and we plan to use it for harnesses around lights that are moved a little more frequently.
Quantity:1 Set of 2pcs. so I don't think it is cosmetic. I don't think there is any Merit to buy except for price adjustment.
View detail
Can be inserted into a hole and fixed in place.
It is a product that can be inserted into the hole and fixed with Tie Wrap.
Thank goodness I usually don't sell Rose.
View detail
K-CON Connector Set
About quality and texture The product is of good quality About the feeling of use I couldn't install it because of the wrong purchase Products to buy together Connector shape female, male. This is the set that you have to buy Difficulty of installation Installation where necessary Cost performance and comparison with other products The price is better than other companies' products and the quality is better About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing When I received the package and looked at the connector, I bought it because it was 3p in the picture on the product page, but it says 2p in the product description I'm afraid I have to use it well View detail
The Emon terminals on hand will not work.
I saw a comment that Emon's plug receptacle was too tight to fit in the Harness plug receptacle, and the product description said it used the Bullet Terminal made by the company, so I had no choice but to buy it.
Naturally, it was installed without irritation.
View detail
no inconvenience
K-CON, which I will use as well as Emon. when I buy, I am thinking about which one is in stock, but let's thank everyone involved in the Motorcycle industry for doing a good job of selling these products in Small portions. View detail
Is it kinder to have the Crimp way written down?
Unlike other ordinary couplers, TAB, receptacle is Quantity:Is it because there are not many scenes to replace TAB and receptacle with WaterproofCoupler at the same time?
I had no problems, but first-time users of this type of WaterproofCoupler may not realize that the Waterproof Plug is also crimped at the same time as the Crimp Timing on the terminals.
View detail
make no mistake
It is fine to use it in areas where it is absolutely necessary, but it is not allowed to fail because spare terminals are not included.
It would be very awkward if you accidentally forget to do it, especially since you have to Crimp the Rubber for Waterproof together.
View detail
For Wiring
I bought this for redoing Wiring.
Gold type、Quantity:I bought this one because I thought it contained the number of pieces in Set.
If you can choose Male, Female, and the number of items, and purchase them at a lower price, it would be very helpful.
View detail
I'd like to use it invisibly.
It is better to use it when you deal with a thin wiring, or when you want to make it crawl for a long time. It's not cool to see the caterpillar, so it's the place to show your skill to hide it.
To some extent, I think it's better to buy these things in each Size at once.
View detail
Electrical Materials
It doesn't matter if it's at Emon or KITACO, but it's nice to know that it's available at the mass merchant when I need it.
The wire itself and Heat Shrink Tube, etc. which are frequently used have stocked a certain amount at home, but as for Connector, because what I use each time is different, I place more importance on the availability which is readily available.
If I had to say, I'd be grateful if there was a Black color rather than a White color.
View detail
I was able to put together Wiring in a nice way
I used it to put together a voltmeter wiring I purchased a 5.5" inside diameter, but it was thinner than I expected and I was concerned about the durability of the Large Quantity from Battery:It was a 2pc line, so I was able to put it together without any problems It is crawling underneath my feet, but it seems to be in harmony with the black color of the flat stayup This is a good example of how to make a good quality product I've been using them for a while now, and I've been using them for a while now View detail
For the installation of the Fuel Catch Tank
Catch tank is needed when running in a circuit, and the handling of the hose to access it Refreshing
It is better to have a narrower Y-shaped angle
View detail
It is good to use it because various Size are included little by little
Since various Size is included, it is good to use it, but I think that each Size has a small amount as well.
When using Heat gun it shrank instantaneously.
View detail
I was looking for this Size terminal
The terminal connecting to the Brake switch was replaced because it was a poor contact. This Size was not even in Set of Electric Works Pliers and was looking for a place that could be bought cheaply without being even 100. It was good to change as much as needed. It is regrettable that it is not the same L shape as OEM. View detail
If there are uneven selling of Male terminal and Female terminal ~
Exchange of Blinker of MT-09 (Re) It is purchased along with. It is normal to do the product, it is normal, if you insert it with Snap it fits into ConnectorBody, it is a good product without problems, but there is nothing to do with the use of Male terminal merely in my inventory. I also thought about buying at the specialty shop of the web, but considering the shipping fee in purchasing only the terminal, it got higher and decided to give KITACO's products.
Manufacturer I definitely would like to consider selling only the Male terminal, only the Female terminal.
View detail