Reviews
I want to prevent the ingress of rainwater
Solder I wanted to prevent water from entering the part I bought.
It seems a bit low with Dryer's fever,
Taking care, I shrunk with Cooker's fire.
Various Color (5 colors) It is convenient because there is.
View detail
OEMConnectorSpec.
Fender Eliminator (Magical) I bought it for Wiring of License Plate Light. In the past I connected to the same model with the Bullet Terminal terminal, but this time I made it possible to plug into the OEM Coupler. The difficulty was that Coupler's terminal jacks were Small, so even if we used thin wires, it was hard to get into the specified depth and I was in trouble..
In my case I pushed it with a Small Slotted screwdriver, I feel relieved when I get in to Pushingon.
View detail
I was looking for this Size terminal
The terminal connecting to the Brake switch was replaced because it was a poor contact. This Size was not even in Set of Electric Works Pliers and was looking for a place that could be bought cheaply without being even 100. It was good to change as much as needed. It is regrettable that it is not the same L shape as OEM. View detail
Purchase
I purchased Screw for Blinker and Tail. We exchanged Tail's Screw from OEM's iron object to this Stainless Steel's one. Iron Screw does not rust if it is being carefully changed, but it exchanged for the appearance priority. View detail
Used for MONKEY
Honda car Bullet Terminal is dedicated Size unlike Homsen and Universal, so I bought it. Although it is from other Manufacturers, I bought it because the best Cospa was good. It is a useful item and I am allowed to use free shipping fee of 3000 yen lol View detail
If there are uneven selling of Male terminal and Female terminal ~
Exchange of Blinker of MT-09 (Re) It is purchased along with. It is normal to do the product, it is normal, if you insert it with Snap it fits into ConnectorBody, it is a good product without problems, but there is nothing to do with the use of Male terminal merely in my inventory. I also thought about buying at the specialty shop of the web, but considering the shipping fee in purchasing only the terminal, it got higher and decided to give KITACO's products.
Manufacturer I definitely would like to consider selling only the Male terminal, only the Female terminal.
View detail
Used for MONKEY
I bought it to make Wiring of MONKEY neat. I used Bullet Terminal which I sold in Homsen etc. before, because the Size was different, I had a difficult time, so I got it properly for Honda this time. Lol
MONKEY is worried about water because it has many exposed parts. Waterproof Specification etc. are out from other Manufacturer, but we do not ride with basic rain and COSPA is good and I made it here.
View detail
Probably the cheapest 090 HMWaterproofTerminal Set
090 terminal, "Electric Works Pliers" Okay then
It is impossible to crimp.
"Engineer precision Crimped Pliers PA-21" The
When using, it is very easy and beautiful
I was able to crimp it..
"Ordinary Electric Works Pliers" For those who do not have,
Let's use Coupler of 110 terminal as Large person.
If there is a bad reason if it is not 090 terminal,
You should buy the Large manika PA-21.
People who buy this product need to say
I guess it is not!
View detail
Used for Wiring hidden & waterproof processing when replacing Headlight
When I exchanged the Headlight of MT - 09, I bought it because Harness' s Couplers were completely visible and I was concerned about Waterproof in terms of being unclear.
【What made you decide the purchase?】
Originally we wrapped a Self Fuser Tape around Coupler, but because of the inconvenience it is too inconvenient to think about maintenance, we jumped to find this item.
【How was it actually used?】
Because of its flexibility, it can be inserted without problems even with a somewhat Limit Large Kisano Coupler.
Indeed it was uneasy as it was thought of Waterproof thing, so I fixed it with Tie Wrap and wound a Tape for Harness.
【Mounting was difficult?】
Depends on Coupler's Size.
If it is about entrance Limit Rubber has flexibility so it is possible to enter it without difficulty.
【Please tell me the installation point and hang】
Please try applying a small amount of Silicon spray or Grease when it is difficult to enter Harness by all means.
I think it will be much easier to enter.
[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
The Size expansion feels a bit extreme.
When purchasing things of 20 pie X 38 pie X 82 mm this time it was Limit, but when it comes to Size on it 20 pies X 48 pie X 100 mm suddenly suddenly become large Large so I am using it as it is. I think that it was still better if there were things of about 20 pie X 43 to 45 pie X 90 mm in the middle.
【Have you compared items?】
DAYTONA Connector cover boots
Through Size because there was not JUST in Size expansion.
I also felt a little troubling that I had to Cut the entrance myself.
[Others]
I think that it is a niche product.
But I think that it is essential to customize where parts like Wiring such as Headlight are mixed.
If Coupler or Harness that is exposed even at NORMAL and Motorcycle Manufacturer side also covers a certain amount of water, it will make Large sturdy, but if you want to ride a Custom car you long, such products I think that it is best to crush a Trouble sprout even a little using it.
View detail
Just selling it anywhere.
Although it is a Stainless Steel Band that sells anywhere, this product is well suited to Screw and is easy to use and easy to use.
In the streets unnecessarily requesting a wide Minus Dora? There is also a Band where the groove is sweet and frustrating and irritated often ... .....
View detail
It's fairly easy to use.
Air cleaner Installed BlowbyCatch tank as a result of making it less.
I bought it to fix that Hose.
If it finds it, it is a commodity sold as much as Homsen etc, but purchased together with Hose kind.
Ease of use is unlimited and unbreakable, nothing special, such as being rigid, such as being unable to conclude, etc. are necessary and sufficient.
View detail
KITACOConveniencePartsK-CON Connector set
I purchased this KITACOConveniencePartsK-CON Connector set so that you can easily attach and detach Wiring's connection using Connector.
This KITACOConveniencePartsK - CON Connector set is a 3 - wire Connector so you can connect securely with One - touch so as not to mistake ++ -.
In order to connect 3 wires, I attach 6 Gold gold wires crimped to Wiring, but I solder the Gold gold terminal and Wiring crimped in order to further securely connect firmly came.
This KITACOConveniencePartsK - CON Connector set can connect Wiring easily and reliably conveniently, but Material : Plastic's Connector itself is a little bulky so choose the place to hide.
I attached a Tale lamp to the removable Rear Carrier separately from the Motorcycle Body, so I used this KITACOConveniencePartsK - CON Connector set to do its Wiring.
Tale lamp (+) And Stop lamp (+) And Minus (-) This KITACOConveniencePartsK - CON Connector set is a perfect item to connect and disconnect three wires of the Connector itself, but as mentioned above, the Large rating of the Connector itself becomes a little obstructive.
When wiring to Tale lamp with Rear Carrier, this connector is pulled to Carrier in Hemp palmk band, so it's nice to have it fit, but it is on Motorcycle side when Rear Carrier is removed When hiding half of Wiring's Connector under Seat, I had a little hard time to hide the Connector without filling in the gap.
Actually, since it is not Seat's gap but Seat is completely removed and this connector is pushed into the space below, it is not problematic for practical use.
Until then, we had connected color-coded Wiring one by one at the Bullet Terminal terminal.
Since each Bullet Terminal terminal was Small, it could be pushed into a narrow gap, but it was a troublesome task because it was impossible to connect with one-touch at the time of connection.
Although it was not bad even with the convenient Bullet Terminal terminal, after switching to this KITACOConvenience Parts K-CON Connector set, the connection became quite convenient.
Material : Although there is anxiety about the durability from ultraviolet rays of the PlasticConnector part and direct sunlight, it is very easy to use Items.
.
View detail
Make peace of mind whenever you use it
I always use it is easy to use without problems
Although it may not have an impression, it is easier to use than a car because I used it up to now
Try using one after another
View detail
My original MotoEasy parts
In order to produce my own MotoEasy, I purchased it because it was easy to find if I was looking for Headlight's H4 Coupler.
I installed it but I was able to attach to Smooth without any problems.
View detail
KITACOConveniencePartsK-CON Connector set
【What made you decide the purchase?】
I wanted to install and detach easily so as not to mistake the 3 wires of Wiring, so I purchased this KITACOK-CONCONnector set and tried using it.
【How was it actually used?】
When extending Rear Carrier, OEM's Tail lamp became hard to see from behind, so I installed an auxiliary light on the expanded Rear Carrier, but since Carrier is frequently installed and removed frequently, I used it until then We exchanged this KITACOK - CONConnector set from the Bossi terminal of the Wiring connection.
Thanks to the usability related to installation and removal, it got better enough to make a mistake.
【Mounting was difficult?】
When inserting this KITACOK - CONCONnector 's terminal into the Coupler, you must install it while confirming that the direction of the terminal is not wrong.
It is not difficult, but attention is necessary.
【Please tell me the installation point and hang】
I crimped Wiring to each terminal before inserting the terminal into this KITACOK - CONCONnector 's Coupler, and I attached it to the Coupler so as not to make a mistake after soldering.
[Is there anything I was disappointed about?]
It was Compact because Wiring was connected with 3 line segments Bullet Terminal jacks, but Large is bulky instead of this KITACOConnector.
Although it became convenient after wearing it, this KITACOConnector became in a state of disturbance more than I expected.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I'm very happy to have a Waterproof ability a little more, but I think this price is a sufficient product at this price.
【Have you compared items?】
Bullet Terminal terminal connection changed from this KITACOK-CONCONnector set connection.
Normally, without making a mistake it is possible to easily disconnect and disconnect Wiring in a short time, but this KITACOK-CONConnector set is inferior to Bullet Terminal terminal in Waterproof ability, and the Large size becomes an obstacle.
[Others]
Since this KITACOConnector sounds with Engine vibration, it fixed in the in Hemp palmk band.
Also, since this KITACOConnector has no Waterproof ability, Waterproof measures were applied to the root of six places of each Wiring at the base of Connector with Waterproof Coking agent.
.
View detail
This Size comes in handy surprisingly.
I do not know why anything, but as long as the screws of this size are maintained regularly it is not enough.
Even if you want to use it sometimes, you are in Garage from the Large body M5 - - -
We are always in Garage as stock for emergency.
View detail
Purchase Female for KLX 125 Rear blinker
Last time in acquaintance's KLX 125 Rear blinker exchange
Cutting the Wiring of the Unbreakable lens and directly attaching the Connector, this time I created the Extension Cord properly in the Connector.
Machine side, Green and White is PlusWiring.
I think that it is better than direct because Wiring can also afford it with this.
View detail
When I only want Connector's One Side
I bought it when I exchange OEMBlinker for DRC LED Blinker. The other Manufacturer is TAB, receptacleSet, but this is very saved because it is sold only with Female. View detail
There is no bad thing
Speaking of
I hope if there are other colors.
I do not need the Male part
Female only Quantity : 2pc. It was purchase of Set.
KLX125
In for Rear
Purchased with Unbreakable lens.
Blinker
Fender Eliminator's Tail fixed Bolt
Fixed to Plate
View detail
Wiring clears up
In attaching a water temperature gauge afterwards, I used it to interrupt the power supply of the water temperature gauge into the Wiring of the Attachment power supply which was used in ETC.
Even though Wiring is invisible, it is bad that maintainability also deteriorates, so it is better for Wiring to have fewer one.
I think that people who do Custom of electrical system by themselves have no losses.
View detail