Reviews
It is stiff and helpful.
Since the clutch lever, wire, and routing, etc., have been replaced, it may be that the mounting points are subjected to forces in odd directions, or it may be that the quantity has already been reduced.:2pc. Set ruined.
The clutch can be cut without it, but it is smoother with this cover. As other reviewers have mentioned, if the installation method is correct, there is a little bit of hang.
I have one squishy one a year, but I always Stock it because of the price. I really appreciate the fact that you can provide these parts.
View detail
For branching to Gasoline Reserve Tank
I used this product as a branch to Gasoline reserve tank. The grooves are cut so it is easy to use and the hose does not come loose. View detail
Same as OEM Product and etc.
OEM Product was removed and used for replacement.
Refreshingly fits into a parallel type stop.
View detail
no inconvenience
K-CON, which I will use as well as Emon. when I buy, I am thinking about which one is in stock, but let's thank everyone involved in the Motorcycle industry for doing a good job of selling these products in Small portions. View detail
For SEROW225 Engine Starter Motor
[How is it used?
SEROW225 (1992, Model:1KH) on the
Fell in an Enduro race and unfortunately hit the Engine Starter Motor against a stone, causing the Button to cave in and rendering the car unrecoverable.
When I opened it later, I found that the plastic parts inside were missing. Since it was the same year as the previous model, we decided to replace the entire used assembly.
After doing some research through image searches, etc., I learned that there are many different types of connectors for the same SEROW, such as different PIN numbers. I found it difficult to see the image of this connector part of the used assembly, and I thought it might be different, so I bought this one as an insurance.
In conclusion, this product did not come into play this time because the Connector that came with the Assy was exactly what we wanted and we were able to pimp it out. It is a temporary Stay since there are likely to be other places where it is used.
Was the one you received as per Image?
It was just as Image. Type 110, 3-pin. It is
Was the installation difficult?
I am not familiar with wiring work, so if I were to do it, it would be a bit difficult.
How was your experience with it?
unused
[Included Parts:were they on?
At a minimum, only ConnectorTAB, receptacle components.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
For the first time, Emon's electricianQuantity:Set is recommended.
https://www.webike.net/sd/1353762/
View detail
Is it kinder to have the Crimp way written down?
Unlike other ordinary couplers, TAB, receptacle is Quantity:Is it because there are not many scenes to replace TAB and receptacle with WaterproofCoupler at the same time?
I had no problems, but first-time users of this type of WaterproofCoupler may not realize that the Waterproof Plug is also crimped at the same time as the Crimp Timing on the terminals.
View detail
make no mistake
It is fine to use it in areas where it is absolutely necessary, but it is not allowed to fail because spare terminals are not included.
It would be very awkward if you accidentally forget to do it, especially since you have to Crimp the Rubber for Waterproof together.
View detail
Brake terminal is still this one.
After all, it's not a flash in the pan for Brake switch unless it comes with this flag-shaped protective Vinyl.
Note that the vinyl insert is a bit long and must be pushed in to fit.
Also, Wiring is horribly hard.
View detail
Thank you for the good product
Thank you for the good product. I used this to enlarge the size of Yamaha's rz50 battery. The result is satisfactory and the fit is good. View detail
It's cheap, so it's safe to buy it together with Coupler.
I bought a Connector set to change the Blinker on my KLX230 to Other Brand Product, and I'm working on the conversion.
When I pinched the last 1pc. with Crimped Pliers, the terminal was broken!
I couldn't even reuse the parts, so I ordered these Repair Parts in a hurry. The work was completed successfully.
It's a crimping process that I've done many times, but there's a rare chance that some combination of factors could cause an accident.
When you buy a Connector set that you don't have a spare for, you can order it along with it so that you don't have to worry if something goes wrong.
Quantity:1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs.
View detail
TO SWAP MY CUB 50 TO 100engine
ENG: i have 100cc korean engine and i need change some few cables from engine 5 cables but this engine so old condition and i must replace connceter so i choose this and it fit perfect little bit small but if you change male - female connecter both it will be fine and easy old korea enigne has 5 cable ( N , 4th ) and original cub 50 has 3th gear so only has N sensor Once connected, green-yellow-white-blue-black-green-red View detail
for OEM battery connect
ENG: people who sell giorno to me, they cut the battery wire and change the cables akwardly haha so i must recover all harness so i decide use original connecter and battery so this is it ready to use condiction just put some bullet connecter and cover some tape and done! KOR: The previous owner modified the battery harness to fit a larger battery. I want to install a genuine battery. The battery is not genuine and the floor panel does not close. So I prepared a battery and prepared a connector View detail
And for Throttle mods.
Purchased for Wire length adjustment to replace OEM Throttle with High throttle.
Usually Outer and Quantity:It is not only for repairing when the inner wire is broken, but also for replacing the inner wire of the old car when the length is not enough due to high throttle like me or OEM parts are no longer available.
Usually, you will have to adjust the length by cutting the opposite part of the Thailandco, but that part is also neatly frayed and fastened, so that it does not get caught or cause problems from before Spec.
UniversalWire may look good, but stretching and durability issues can be large, so we recommend using these reliable products.
View detail
For KTM DUKE200Front brake switch
It's expensive for such a small part! The reason why it is not 3 is because this Small Size Plain Type Terminal is not sold at Homsens and Large Hand Car Parts Stores. (Lol)
KITACO's expensive, but it's no wonder Size is unique. (Lol)
Anyway, the hassle of sanding a cheap one is Large strange, so here it is! "Making honeydew."
Take Plus out of Brake switch.
A course for the electrically challenged
As shown in the picture, first remove the Red Vinyl coating, you can use Nipper, Cutter, or burn it with a lighter.
Crimp the terminal with Pliers at three places of the tip
Male-type terminal Quantity coming out of Brake switch:2pc. Use one of them for the Set, so you can attach the corresponding Female type to 1pc.
The wiring tip for the brake switch extending from the car body is a Female type, so attach a Male type terminal somewhere. Both terminals can be anywhere.
One of the three mata becomes the Plus side to take out, and it connects it to Plus side Wiring of the additional equipment. It can be Male, Female, Round Type, Direct Soldering, or Nan according to the side to be connected.
The Minus side can be from the BatteryMinus side or the car body Earth or Nan.
As a precaution, put a Fuse somewhere.
Male-type terminal Quantity coming out of Brake switch:2pc. One of the Sets has Plus running all the time, and the other has Plus running when you hold Brake.
If you want to add a USB port, you can use the one that is always flowing, and if you want to use a light that is linked to Brake, you can use the other one. It chooses according to the use.
Even if you don't have a tester, you can test it by temporarily attaching the Minus to the body ground and connecting it to one of the brake switches. (Lol)
View detail
K con cable Tube mark . super quality
I'm looking for genuine quality products.this the one what I need .good quality blabel mark . soft sleeve and sharp marking.highly recommended product.thaks k-con. View detail
K con insulation tube .super quality
Super quality flexible and high durability.this my 2nd order.last year brought one still using without hard and still flexible.highly recommended product.thaks k con. View detail
For Wiring
I bought this for redoing Wiring.
Gold type、Quantity:I bought this one because I thought it contained the number of pieces in Set.
If you can choose Male, Female, and the number of items, and purchase them at a lower price, it would be very helpful.
View detail
It's best not to use it
I bought Inner wire from KITACO.
I take it with me in case of emergencies on the way to touring (I don't want to use it).
The area of the bag is quite a lot, but it is very thin because it is Wire, so I think that it can fit under the Seat if it is a Scooter, and I think that it can fit under the Seat if it is a Motorcycle, and I think that it can be stored in Dee Bucketc. without taking up space.
There is enough length, and there are two kinds of thickness, a thick 2mm length of 1.5m for Clutch and a 1.5mm length of 2m for Slot.
1.As for 5mm, LWrench, Cable end and Screw are also Quantity.:It was in the Set, and the one of 2mm longitude is only Wire, too.:I wanted it to be Set.
If you are in the middle of touring, you may need a tool to cut the wire?
When you use it for the front brake of the old car, it stretches and it becomes Large strange. When it is used for the front brake of an old car, it stretches and becomes Large strange.
View detail
I'll hold it steady.
I bought this for KITACO and Inner wire and for Cable which was removed.
I think it's good to buy a new cable if it comes off, but my old car is coming out without Parts, especially the separated wire of 2Cycle car, so this product is very helpful.
I purchased the Axel side 6/6Clutch Side 6/10.
The Screw is short and long enough to store securely, so you won't have to modify it after installation.
I haven't used it yet, but I think I'll use Epoxy adhesive to hold it in place when I install it.
It comes with a Hexagonal Wrench, but I don't need it, and I would like the price to be a little lower without the Hexagonal Wrench. (This time, there are now four Hexagonal Wrenches of the same Size.) So it became a Cost performance 4 stars.
View detail
I use it for Wiring protection of power supplies.
The 12V from the Battery is used for Wiring protection from the bottom of the Seat to the Front section.
I think the Colgate Tube is the best choice because the moving part is where it passes to the Handlebar section.
Regardless of the voltage, it is recommended to cover and wire where Short is concerned.
View detail