Reviews
Stainless bolt
The installed screws were not stainless steel, but old, so we replaced them with rust-resistant stainless steel screws.
Screw size, type and what I needed was helpful because I could choose what I needed.
View detail
Stainless Steel
Fixing Screw is replaced with Stainless Steel.
It is now rust-resistant and looks great.
It was helpful to be able to choose the Size and length.
View detail
Spare Parts
It is safe to have it in Spare Parts. View detail
The Emon terminals on hand will not work.
I saw a comment that Emon's plug receptacle was too tight to fit in the Harness plug receptacle, and the product description said it used the Bullet Terminal made by the company, so I had no choice but to buy it.
Naturally, it was installed without irritation.
View detail
Unless you're in a hurry.
If you need it in a hurry, it is possible.
If you are not in a hurry, you should order OEMParts.
The prices are too different.
If you have time, I recommend you to buy OEM Product.
View detail
Fits: HONDA CBR1000RR-R, HONDA NC750X, HONDA X-ADV, HONDA CBR250RR, HONDA CRF250L, HONDA ADV150, HONDA MONKEY125, HONDA PCX
after my purchase
It was good that the delivery was fast. It came early. Why do you keep urging me to write down my review?It was good that the delivery was fast. It came early. Why do you keep urging me to write down my review? View detail
Harness tape if you do electrical work
I used to think Vinyl Tape was fine.
However, Vinyl tape can become sticky over time, so it is better to use a proper harness tape, even though it costs a little more.
Harness tape from KITACO, so far without any problems.
We'll see what happens when we remove the Tape in a few years!
View detail
Used for fixing Carrier and Mounting Base without modification
The CB400SF is equipped with DAYTONA's Multi Wing Carrier, which is used as a bracket to fix the Carrier and the mounting base.
As a result, I am satisfied with the normal use of the product.
However, similar products are sometimes cheaper to buy at Home center.
It's Stainless, so I hope it won't rust (laughs).
View detail
Cheap and sufficient for your needs
Quantity of Fuel Hose from Carburetor:This is a must-have when taking out 2pcs. It is more reliable to use Gold Pipe, but I always use Material because it seems to cause strange interference with Carburetor's body and they may cut each other.:Plastic is the choice. View detail
As a peace of mind fee.
Purchased for Trouble recovery on the go.
Thailandco is not included and must be provided separately.
I made and installed the carburetor side with a brass rod, and the clutch lever side is a quantity of commercially available emergency thailand coils that can be screwed on.:Carried in Set.
I don't want it to happen, but if you are prepared, you can avoid a Large situation in the event of a Trouble. It is like an insurance policy.
View detail
Stainless bolt
The bolt installed was not stainless steel, so it was changed to this stainless steel to prevent rusting.
The look and feel of this Stainless Steel has become a good feeling.
View detail
MONKEYTop bridge
Used for the bolt of MONKEYTop bridge. This is definitely usable. View detail
It is used for the circumference of the crankcase of the monkey. Brightness peculiar to a stainless is perfect for the generator cover of a takegawa.
It is used for the circumference of the crankcase of the monkey.
Brightness peculiar to a stainless is perfect for the generator cover of a takegawa.
View detail
The product of a kitaco is TSU which is only a product saved cheaply and joyfully!! Custom-made plan of the blinker of W650. (The 1) TSU which is appropriation wearing about the blinker of 250TR W650!! First of all, it is exchange about the conclusion
The product of a kitaco is TSU which is only a product saved cheaply and joyfully!! Custom-made plan of the blinker of W650.
(The 1) TSU which is appropriation wearing about the blinker of 250TR W650!! First of all, it is exchange about the conclusion screw of the blinker lens of 250TR.
Since an authentic positive one is iron and it is easy to rust, parts are replaced to the tapping screw made from a stainless!! YO from which the tapping screw for the pure blinkers of a zephyr system or a vulcan system is incidentally also set to M4x25.
We did two-piece (a total of 8) acquisition of the product here, and were taken as the screw of the blinker lens of order.
*) -- The stock case of W650 becomes the relay of 12V/15W.
Relay exchange becomes indispensable when diverting the blinker of other vehicles to W650.
Relay #27002-1101 for 12V/21W (product blinker conversion-code made from posh is followed.) = Kawasaki original manufacturer's product
.
.)
View detail
Turn signal plug from kcon
About quality and texture, Just a wonderfully designed rear sprocket with beautiful gold anodizing. A real special piece for the Monkey. * About the feeling of use, Another cosmetic upgrade over the previous black Kitaco rear sprocket and wow does this gold sprocket pop. * Products to buy together, A new gold drive chain is ideal to purchase together with this gold rear sprocket. * Difficulty of installation, This sprocket is a direct fit with no modification required, the rear wheel just needs to be removed from the motorcycle to allow for installation. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, This is by far the most expensive rear sprocket for the Monkey but if you are looking to add some style with the gold bling then this is the only one to go with. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you are wanting a gold rear sprocket at a more affordable price then checkout the one from Endurance for the Honda Grom. Use the product reviews to assist in making a decision on your purchase. View detail
A lifesaver in times of trouble!
[How is it used?
During a month-long long-distance touring with FZS600, one of the bolts holding the RightFootpeg Plate fell off or was lost while driving about 2000 km after departure (tears). It was a holiday weekend in May, and all the motorcycle shops were closed, so I was at a loss. In the shelves, I found the Bolt I was looking for! Cap Bolt with FlangeM8x20 P1.25 The M8 Bolt was sitting in a brilliant halo (our Image)! I felt as if I had used up all the luck in my life at that time. (Laughs) Home center also sells M8 Bolt, but most large ones are P1.5, and P1.25, which is often used for motorcycles, is rarely sold.
Was the installation difficult?
The kind and beautiful lady clerk at 2 Rinkan (our Image) lent me a tool and I was able to install it quickly and easily.
How was your experience with it?
It's the same Bolt as the OEM, so nothing has changed, but it has filled my heart! (LOL)
[Was there anything that disappointed you?
There's not a ton of demonstration that I'm not disappointed! I can't sleep with my feet facing 2 Rinkan and KITACO anymore! (LOL)
Other items that would be helpful
Opinions and requests for Manufacturer:KITACO! Thanks for all your help! And 2 Rinkan too! (Sorry, Mr. We-Big!)
View detail
There is no problem
It is a good product in general, and I chose it because I imagined it would be more resistant to deterioration over time than the White color. View detail
It is stiff and helpful.
Since the clutch lever, wire, and routing, etc., have been replaced, it may be that the mounting points are subjected to forces in odd directions, or it may be that the quantity has already been reduced.:2pc. Set ruined.
The clutch can be cut without it, but it is smoother with this cover. As other reviewers have mentioned, if the installation method is correct, there is a little bit of hang.
I have one squishy one a year, but I always Stock it because of the price. I really appreciate the fact that you can provide these parts.
View detail
For a little Fashion
Used as License Plate Bolt.
It's good for a little Fashion when you don't want to be flashy.
It gives a slightly more luxurious feel than OEM.
View detail
On License Plate Bolt
I wanted to put a round Sticker on the License Plate Bolt, and I'm glad I found just the right one. View detail