Reviews
Replace each time when replacing Oil
I purchased the washer for the drain bolt part because I was told that it should be replaced as needed when changing the oil.
OEM Product may be correct, but Other Brand Product is easier to procure, and since it is only a washer, there is not much difference between the two.
View detail
Buy Bore Up Kit for Repair!
[How is it used?
The Clip that came with the Bore Up Kit contained only the minimum necessary and was insufficient during maintenance, which led to its purchase.
How was your experience with it?
BALI is a concern, but if it is used with BALI removed as described in the Instruction Manual, it can be used without problems.
How did it compare to other products?
It is more difficult to fit than the e-type Pin from Mukawa or Clipping point, but I think Orthodox is more stable and less likely to come off.
[Points to note]
If it fails, it will fly away and you will not know where it went.
I think it would be tough to take it out once it is inside the Crankcase.
▼It seems that inventory is running low, but if it goes out of use, maintenance will not be possible.
It would be sad to see Repair Parts become a valuable part of the old car category any longer.
View detail
Replacement Oil Drain Bolt Sealing Washer for the Grom
About quality and texture: I am happy with the quality of the sealing washer from K-CON, the washer is made from aluminium and has an outer diameter of 20mm, inner diameter of 12mm and a thichness of 1.5mm. About the feeling of use: The oil drain bolt was showing signs of oil leaking and after the replacement of the sealing washer and tightening it to the correct torque value there are now zero oil leaks. Products to buy together: Somemore sealing washer both from K-CON and Honda would also be desirable to purchase along with this sealing washers as these are consumable items that need replacing on occasion. Difficulty of installation: The process to install takes about 5 minutes, give the mating surface a clean, fit a sealing washer up the head of the oil drain bolt and tighten down to 24N . m. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-CON that was in stock and ready to ship unlike the Honda sealing washer but the K-CON sealing washer is slightly more expensive. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These sealing washers are a consumable item and you need to have spares on hand when carrying out your own maintenance as they tend to leak after being re-used a few times. View detail
OEM Product is much cheaper
I bought it for Oilfor Replacement while I had to buy something to renew my PointCard expiration date at the supply store.
OEM Product is 66 yen, so it is quite expensive compared to OEM Product. But, it is expensive compared to Gold, but it is only about 100 yen, so if you are in a hurry, it is possible.......
Well, if you are going to manage Cost severely, you don't do Recommendation.
View detail
The first oil change was also easy-to-use.
The first oil change was also easy-to-use. View detail
New Washer
Always change the RingWasher when changing the oil. View detail
Normal product, that's good enough for me.
The Oil drain Washer can be reused to some extent, but I'm replacing it for mental health reasons.
The only thing that bothers me is the price difference with other Manufacturers?
View detail
very good
My car is KAWASAKI’s NINJA 400, model year 2019. When changing the oil, this gasket must be changed. Worried about the poor quality in China, I bought this K-CON oil-proof gasket on webike. The price is not expensive, it is still a big brand, and you can do it yourself if you change the oil later. At the same time, I bought another brand. After the exchange, compare the differences. ---------------------------------------------- My car is 400 , the 2019 models of KAWASAKI NINJA. When changing the oil, the gasket must want to change. China concerned about the quality is not, buy this K-CON's oil port pads on webike. Inexpensive, or big brand, it is entirely possible after the oil change yourself up. He also bought other brands, after changing compare what is different. Powered by Google Translator View detail
It's a little expensive
If you know the OEM part number, I think it's cheaper there.
Daytona and others have changed from the Gold genus to other types.
I was looking for this product that can be used to some extent.
But it needs to be replaced before it leaks.
View detail
No problem
I used it on a '95 ESTRELLA 250 It was installed with no problems and no oil leaks even now The price was low so I went with this one View detail
usually
It is very ordinary. It is just a Manufacturer item. Used for CB 1300. OEM purchased at the DREAM store before was cheap. No trouble after installation. View detail
There are also cheaper ones - - -.
There are also cheaper products in terms of price,
The making is quite different from the comparison.
But actually I purchase both,
Oil in regular feet Replacing the cheaper one to the frequent Motorcycle frequently,
Touring and so on but going to Motorcycle with less frequent exchange
I use this item.
Is the difference in price an assurance fee.
View detail
KITACOConveniencePartsK-CON Sealing washer
Oil It is surely exchanged at the time of replacement.
After exchanging, I ran about 1000 km, but Oil did not leak well.
Because it is not a high thing, let's exchange it.
View detail
If in doubt, a special item?
I heard that something made from PVC, which is sold normally in Homsen, is not the same as that of the product here, I heard somewhere before that, but something selling at Ho Sen 's bargain is soft and unreliable.
I chose this because it seemed to be somewhat longer lasting here.
Usability is good without a strange habit.
Whether it will last long depends on the place you use, but the Large body is a place where heat is applied. I think that lifespan is not long so long, I think.
View detail
To Hose for Blowby
I used Blowby as a catch tank and then used it to go outside. Especially I could use it without problems but I felt that the price was a little expensive.
However, since Hose is solid and there is a sense of security, it is Recommendation. Hose itself received a slightly conspicuous impression.
View detail
KITACOConveniencePartsK-CON Sealing washer
I think that there is no problem if only compatible models can be confirmed. Especially neither it nor impossible. If you can install it I would like to see the passage of time and the degree of deterioration. View detail
I am happy that there are various Size
Used for MONKEY's Oil line.
Because it is not oil resistant so at your own risk.
Since there is finely set Size, it will be useful when giving a sense of unity of appearance.
More than anything, I am happy that there is WEBIKE stock.
View detail
Aluminum drain/Sealing washer
I will try to replace it whenever Oil is exchanged.
Oil It is cheap if you think about leaking.
I exchanged 1,000 KM running but there is no leak.
Let's exchange Sealing washer when exchanging Oil.
View detail
Unit Purchase Can be gotten
Sometimes these niche products sometimes have not been placed in the Home center or supplies stores. Unit Purchase is something I can change to Large. It is KITACO masters. I want you to continue selling it in the future. View detail
KITACO Aluminum drain / Sealing washer
It was a product as expected.
Oil It is surely exchanged at the time of replacement.
If you can prevent Oil bleeding at this price you will naturally buy it.
Although I ran about 100 Km after the exchange, there are no particular problems for now.
View detail