Reviews
I wanted a Stopper in the middle.
I used it on a Gasoline sub tank, it's useful for connecting hoses together, but it's a bit unreliable plastic, so you don't want to use pliers or anything like that when installing it.
A stopper in the middle would have made it easier to use. I'd rather have an aluminum one or something.
View detail
Used to close the negative pressure outlet
According to the title, OEM's Fuel Cook broke down and replaced with Other Company Product, so I bought it to fill the negative pressure outlet on the intake man side.
Because it is a product that has been made for a long time, when using it, put the actual Negative Pressure Nipple in accordance with Length Cut.
Because it is a part that is more durable than fashionable, I expect it to last long.
View detail
If in doubt, a special item?
I heard that something made from PVC, which is sold normally in Homsen, is not the same as that of the product here, I heard somewhere before that, but something selling at Ho Sen 's bargain is soft and unreliable.
I chose this because it seemed to be somewhat longer lasting here.
Usability is good without a strange habit.
Whether it will last long depends on the place you use, but the Large body is a place where heat is applied. I think that lifespan is not long so long, I think.
View detail
KITACOConveniencePartsK-CON Sealing washer
I think that there is no problem if only compatible models can be confirmed. Especially neither it nor impossible. If you can install it I would like to see the passage of time and the degree of deterioration. View detail
I am happy that there are various Size
Used for MONKEY's Oil line.
Because it is not oil resistant so at your own risk.
Since there is finely set Size, it will be useful when giving a sense of unity of appearance.
More than anything, I am happy that there is WEBIKE stock.
View detail
I wanted to remove internal pressure.
As the mysterious ATVPiston was blowing down on Cylinder of CT90, if you noticed, it probably became an Engine Displacement Volume that exceeded 100 CC probably, purchasing the Crank internal pressure worrisome.
Since the Material is Stainless, is not it possible to bear out despite having no Brown installation.
Because there are many uses, it is recommended for people who can not Brown with Aluminum.
View detail
It purchases to work. Since it is an Aluminum and structure is also lightly solid, it is satisfactory.
It purchases to work. Since it is an Aluminum and structure is also lightly solid, it is satisfactory. View detail
At the time of the oil change of SV400S, an order was placed together with the Oil. Although it does not understand well efficiently, it can use ordinarily, and an Oil also leaks or it is not blurred. Isn't it the best for fraction doubling of the
At the time of the oil change of SV400S, an order was placed together with the Oil.
Although it does not understand well efficiently, it can use ordinarily, and an Oil also leaks or it is not blurred.
Isn't it the best for fraction doubling of the
price on order?
View detail
Although the oil change has been done about twice until now, it thought it unsavory not to exchange the 3rd time truly, and purchased. The used touch is touch as it is common and not too bad.
Although the oil change has been done about twice until now, it thought it unsavory not to exchange the 3rd time truly, and purchased.
The used touch is touch as it is common and not too bad.
View detail
[Webike Monitor] It exchanged for the Washer for pure Drain bolts of 250TR. The left-hand side of a photograph becomes a used pure Washer. Since it seems that it will cause oil leakage if the Washer crushed once is used again, it is exchanged for
[Webike Monitor] It exchanged for the Washer for pure Drain bolts of
250TR.
The left-hand side of a photograph becomes a used pure Washer.
Since it seems that it will cause oil leakage if the Washer crushed once is used again, it is exchanged for the degree of an oil change.
12 mm in bore compared the Size and the outside diameter of 20 mm with it being pure pure, and it was slightly small.
Well, since the path of a Bolt is fitted, I think whether it is satisfactory.
View detail
By the first oil change, it purchases as a sealing washer of the drain bolt of Ninja250R. The size chose a thing 12 mm in inside diameter. It was able to insert in the smooth to the bolt, without being too tight. It is preeminent also as opera
By the first oil change, it purchases as a sealing washer of the drain bolt of Ninja250R.
The size chose a thing 12 mm in inside diameter.
It was able to insert in the smooth to the bolt, without being too tight.
It is preeminent also as operative, of course, and oil does not leak.
View detail
It purchased to the oil change fitted with a motor. Furthermore, I think that I can be felt easy about it there since it is only about 1 mm in thickness there although there is also a cheap washer. It is whether it is better to exchange each time,
It purchased to the oil change fitted with a motor.
Furthermore, I think that I can be felt easy about it there since it is only about 1 mm in thickness there although there is also a cheap washer.
It is whether it is better to exchange each time, although somewhat high mind is also carried out.
View detail
There are not an ordinary washer and C, either and there is also no failure. But it is exchange Mandatory each time. Range to which it can consent although I feel for some that it is high for 168 yen.
There are not an ordinary washer and C, either and there is also no failure.
But it is exchange Mandatory each time.
Range to which it can consent although I feel for some that it is high for 168 yen.
View detail
It is an ordinary drain washer also without the especially unusual place and a new place. Since it is not expensive, he is trying to change each time at the time of an oil change.
It is an ordinary drain washer also without the especially unusual place and a new place.
Since it is not expensive, he is trying to change each time at the time of an oil change.
View detail
They are not too bad and ordinary goods. Since a general-purpose oil cooler was attached, it purchased. It was good for the aluminum washer to have been attached. It lets oil pass satisfactorily especially.
They are not too bad and ordinary goods.
Since a general-purpose oil cooler was attached, it purchased.
It was good for the aluminum washer to have been attached.
It lets oil pass satisfactorily especially.
View detail
Since the oil cooler made from a kitaco was purchased, it purchased also here. Although exactly worked as a nipple, I would like you to prepare colors other than blue alumite.
Since the oil cooler made from a kitaco was purchased, it purchased also here.
Although exactly worked as a nipple, I would like you to prepare colors other than blue alumite.
View detail
Although the thing of P company was always used, it changed to the product made from a kitaco cheap No. 1 by the thing for M10. An outside is larger than the thing of P company. Is a difference right? Sealing nature has no problem. A drain
Although the thing of P company was always used, it changed to the product made from a kitaco cheap No. 1 by the thing for M10.
An outside is larger than the thing of P company.
Is a difference right?
Sealing nature has no problem.
A drain washer is high in consumables being comparatively unexpected ...
It is good to be at least one piece 100 ^^;
View detail
Since the hose of the crankcase breather attached from the first had discolored too much brown, it changed. it has been used without measure of die length (1 m) being right just, and cutting it by a vehicle type. When not too bad in if cheap [ to
Since the hose of the crankcase breather attached from the first had discolored too much brown, it changed.
it has been used without measure of die length (1 m) being right just, and cutting it by a vehicle type.
When not too bad in if cheap [ to a slight degree ] in price, it was considered as three stars.
View detail
Since it is involved also in this product, it contributes here. Although the motorcycle of old 2st was supplied recently, oil leakage from the drain of mission oil. He did not notice, but although it was running, most mission oil was empty. Al
Since it is involved also in this product, it contributes here.
Although the motorcycle of old 2st was supplied recently, oil leakage from the drain of mission oil.
He did not notice, but although it was running, most mission oil was empty.
Although it did not break miraculously ... When the cause was explored, it was permeating from the portion of the drain washer.
It seems that the former owner seemingly reused somehow and it had leaked from the crack made here although the aluminum washer of the right-hand side kitaco was attached.
Moreover, although the hole of the drain is corrected by recoil tang and tightness was carried out firmly, it also seemed to be the cause that there is no adhesion with a drain bolt as the original screw hole.
It seems that it does not leak even if it will re-use an honest drain washer several times, if it is a drain of the usual state, but there are also such things that it is the case by which was an old motorcycle or the e-sert was carried out.
The left copper washer which is told repeatedly, and it is softer than aluminum this time, and sticks was constructed, and oil leakage also stopped safely.
By such a translation, by a high thing, since it is not, let's exchange you and a drain washer firmly each time.
The copper washer incidentally reflected to the left can also be purchased for 10 yen [ about 300 ] in a tool store etc.
View detail
Although he can buy it even in a home center, it purchases for the total amount adjustment which aimed at mailing cost no charge. since it can purchase from one, selling itself is appreciated -- it comes out, and it is peevish and changes a size in be
Although he can buy it even in a home center, it purchases for the total amount adjustment which aimed at mailing cost no charge.
since it can purchase from one, selling itself is appreciated -- it comes out, and it is peevish and changes a size in between in the case of ^^purchase -- please be careful for there to be nothing -- 笙ｪ
View detail