Reviews
For KTM DUKE200Front brake switch
It's expensive for such a small part! The reason why it is not 3 is because this Small Size Plain Type Terminal is not sold at Homsens and Large Hand Car Parts Stores. (Lol)
KITACO's expensive, but it's no wonder Size is unique. (Lol)
Anyway, the hassle of sanding a cheap one is Large strange, so here it is! "Making honeydew."
Take Plus out of Brake switch.
A course for the electrically challenged
As shown in the picture, first remove the Red Vinyl coating, you can use Nipper, Cutter, or burn it with a lighter.
Crimp the terminal with Pliers at three places of the tip
Male-type terminal Quantity coming out of Brake switch:2pc. Use one of them for the Set, so you can attach the corresponding Female type to 1pc.
The wiring tip for the brake switch extending from the car body is a Female type, so attach a Male type terminal somewhere. Both terminals can be anywhere.
One of the three mata becomes the Plus side to take out, and it connects it to Plus side Wiring of the additional equipment. It can be Male, Female, Round Type, Direct Soldering, or Nan according to the side to be connected.
The Minus side can be from the BatteryMinus side or the car body Earth or Nan.
As a precaution, put a Fuse somewhere.
Male-type terminal Quantity coming out of Brake switch:2pc. One of the Sets has Plus running all the time, and the other has Plus running when you hold Brake.
If you want to add a USB port, you can use the one that is always flowing, and if you want to use a light that is linked to Brake, you can use the other one. It chooses according to the use.
Even if you don't have a tester, you can test it by temporarily attaching the Minus to the body ground and connecting it to one of the brake switches. (Lol)
View detail
K con cable Tube mark . super quality
I'm looking for genuine quality products.this the one what I need .good quality blabel mark . soft sleeve and sharp marking.highly recommended product.thaks k-con. View detail
K con insulation tube .super quality
Super quality flexible and high durability.this my 2nd order.last year brought one still using without hard and still flexible.highly recommended product.thaks k con. View detail
For Wiring
I bought this for redoing Wiring.
Gold type、Quantity:I bought this one because I thought it contained the number of pieces in Set.
If you can choose Male, Female, and the number of items, and purchase them at a lower price, it would be very helpful.
View detail
I'll hold it steady.
I bought this for KITACO and Inner wire and for Cable which was removed.
I think it's good to buy a new cable if it comes off, but my old car is coming out without Parts, especially the separated wire of 2Cycle car, so this product is very helpful.
I purchased the Axel side 6/6Clutch Side 6/10.
The Screw is short and long enough to store securely, so you won't have to modify it after installation.
I haven't used it yet, but I think I'll use Epoxy adhesive to hold it in place when I install it.
It comes with a Hexagonal Wrench, but I don't need it, and I would like the price to be a little lower without the Hexagonal Wrench. (This time, there are now four Hexagonal Wrenches of the same Size.) So it became a Cost performance 4 stars.
View detail
Low volume Fuse is hard to find in stores, so this is a great help!
Mini Flat Type Fuse.
In the shop, this transit allowable current (capacity) We rarely see any of the
Even if it is sold, it is assorted with other capacities and you will end up buying capacities that you do not need.
Although it is low capacity, I think that it is necessary to install it between the equipment and the battery when I think of the thermal runaway of the equipment to be targeted and an unexpected short.
We try to provide Fuse facilities regardless of the current consumption.
View detail
I use it for Wiring protection of power supplies.
The 12V from the Battery is used for Wiring protection from the bottom of the Seat to the Front section.
I think the Colgate Tube is the best choice because the moving part is where it passes to the Handlebar section.
Regardless of the voltage, it is recommended to cover and wire where Short is concerned.
View detail
Plus line concealment
I use it to hide the Red Plus wire of electrical components.
It is recommended for those who are particular about their appearance, as the Black Minus line and the appearance are aligned and become less noticeable.
View detail
I didn't know they had such nice parts!
The frame mounted wiring band was broken and the OEM one was already discontinued, so I found this and bought it. I've been tinkering with motorcycles for over 10 years and this is the first part I've been impressed with in a long time. View detail
For Wiring treatment after Headlight processing.
There are not many Male type terminals, so I bought this one.
It is converted from H4 Coupler to other Wiring as shown in the image.
I think the quality is good.
The video is a night driving SCENE.
View detail
For Repair.
Bought for Repair. It is very helpful to have something like this. View detail
To the Wiring process
I've always been a fan of K-CON, which deals in little things.
The price and quantity are just right, so it helps.
I used this one for Honda on my MONKEY.
View detail
Fits Yamaha Flasher relayCoupler.
The Coupler of Flasher relay of High Flasher relayetc. is 110 type 3 poles.
It is used for high Flasher relayetc. which is not coupler processed, and it is in Couplet-on state.
The molding of the resin is also perfect.
This video is the introduction of my FZr1000. (There is an explanation of Flasher at the end.)
View detail
It's perfect.
I bought a coNECTOCover to keep the rainwater out.
The Size details are well filled in and I was able to install it without any problems!
View detail
You'll want the Ratchet Type Electric Works Pliers
It is recommended to insert Cover before peeling with Pliers. As a result, the problem of which of TAB and receptacle and the problem of injuring a finger by the contents of Wiring occur, but it is not a problem if you work calmly.
If you expect it to bite into the wiring as well, we recommend buying the Ratchet type Electric Works Pliers as well.
View detail
Not used for the body of the car.
I thought to use it for DL1000 V-STROM250, but I forgot to shift the Bullet Terminal position, and because I did it side-by-side, it became the state of the main crisis that the Slit part opens, I gave up using it. I cut it short and use it for Wiring summary, but the meaning has disappeared.
As a result, it helps me put together Wiring around the PC.
View detail
I'll have to take advantage of the Option.
When using i-mapHarnessKIT for groms, there is a Connector for error detection that lights up when it detects an error between i-map and injection.
This time, I installed the LEDIndicator Lamp which connects to the Connector for error detection of Option.
The LEDIndicator Lamp that I purchased is The "KITACOConvenienceParts:LEDPilot lamp It is. This commodity, the price is cheap, and also there are five colors of Indicator Lamp color. Red was chosen in order that the setting of this time might direct an error detection.
Where to install the LEDPilot lamp when installing it? Also, where's the best place to look! The most suitable place was the front of Tank Cover for my GROM. Once the installation location is decided, I checked the LEDPilot lamp dimensions to see if there is any unreasonable contact with the LEDPilot lamp, and if it is possible to install the LEDPilot lamp, I put the masking tape on it and start to fine tune the actual LEDPilot lamp installation position. This is a tedious process but it is a good way to ensure that the finished product will be in line with Quantity:Pair (for Left and Right) It is important to check again and again to make sure that the hole is properly positioned. After the positioning is finished, next, because the size of the preparation hole is described in the Instruction Manual of LEDPilot lamp, you should do the preparation hole processing described in the Instruction Manual. Large is to process up to the specified size. It is recommended to work carefully on the preparatory hole processing and check several times while proceeding.
When the installation process is completed safely, I will extend the LEDPilot lamp Harness. At the time of purchase there is about 30cm, but because there was about 50cm from the position which was installed this time to the Connector for error detection, it is extended using the 0.75sq. wire of Emon, Bullet Terminal processing is done, and it connects to the Connector for error detection. The handling of wiring was installed along the OEMHarness so that there is no impossibility.
When the installation work ends safely, operation check work is done. First of all, set the Ignition key to ON (you don't have to turn the Cell) as usual. If it is normal, the LEDPilot lamp will not blink. Next, remove the injector coupler of i-mapHarness from the InjectorBody and turn the Ignition key to ON. You have completed the operation check. The operation check is finished. Install the detached injector coupler to the injector body, and if the Ignition key is turned on and the LEDPilot lamp does not blink, the operation is complete.
LEDPilot lamp is also cheap, this time I worked on it because I wanted to use the i-map error detection option of the long-awaited LEDPilot lamp.
View detail
It looks and feels nicely put together.
I used it to put together the Harnesses of the retrofitted electrical components, and it looks clean and assimilated with the original Harnesses of NORMAL. View detail
It looks in good condition.
I am very satisfied with the color and thickness of this Harness, which is the OEM color type. The quality of the product seems to be good, so I haven't had any trouble with it. View detail
You should have it in reserve.
I used it to install Active's Slim reflector on MT09SP.
The quality is absolutely fine
Quantity:1 Set of 10pcs.
View detail