Reviews
To hide the hexagonal hole
Plating was peeling and falling apart, so the
Purchased to replace
It looks pretty shiny.
View detail
I think it's good
It is just a decoration, if you like.
There is no sense of discomfort as if it had been attached from the beginning.
It is completely self-satisfying because no one but the person himself notices it.
View detail
It can be easily customized by simply covering it.
This product can be easily customized by simply placing it over an existing bolt. It can be used to hide rusted screws or as a Simple Waterproof alternative! View detail
It's cheap and it looks good.
I used it to improve the appearance of the cap bolt around the handlebar.
As you can see in the picture, the color matches the Titaniumium color of Posh's NASA TypeCap cover.
It's useful because you can almost hide the Bolt with both of them.
Just one note on installation.
Material:There is a cut-off from the RUNNER 125 at Plastic, so make sure it is on the lower side, where it is less noticeable.
View detail
Luxury in a cheap Bolt
If you put this on, even a cheap Bolt will look luxurious If you care about the appearance, this is the recommendation for you
I was motivated by the crappy Bolt that came with the Over's exhaust system This was introduced
View detail
In places you do not want to make it stand out...
A fashionable Bolt cover of DAYTONA and POSH is also good, but I like this kind of simple design in places where you do not want to make Cap bolt stand out.
I purchased the same Cap Bolt Cover last time, but I bought it as Stock.
Which Manufacturer should cost half price, or about 30%....
View detail
Preliminary purchase.
Stock got lost, so I bought it. I think that it is more durable than the thing of the plaque, so this Bolt cover is all Material : I am wearing Aluminum stuff. When installing, RubberRing is hard and does not fit exactly, so I attach a little Silicon grease. View detail
KITACOConveniencePartsK-CONBolt cover (For 12 mm across flats)
Using this KITACOConveniencePartsK-CON Bolt cover, you will be transformed into a high class for your own Motorcycle to be misplaced.
This KITACOConvenience Parts K-CON Bolt cover 1 pc. Because the price of stuff is not an idiot, so if you install it a number it may be natural to become pretty (Lol)
This KITACOConvenience Parts K-CON Bolt cover (For 12 mm across flats) Is 1 pc. It is about 70 yen per price, but if you try hard on the Bolt heads of various parts of Motorcycle and try harder it will be better for Parenthesis to be worth the effort.
This KITACOConvenience Parts K-CON Bolt cover (For 12 mm across flats) In addition to 10 mm for opposite side and 14 mm for opposite side, we also need to work hard..
When you decorate your Motorcycle with this KITACOConveniencePartsK-CON Bolt cover, it will be very Parenthesis as I mentioned above, but after about a year and a half we will be faded by ultraviolet degradation and deterioration will proceed We will recommend that you exchange it with a new KITACOConvenience Parts K-CON Bolt cover before becoming poorly odorous.
Also, if you would like to install this KITACOConveniencePartsK-CON Bolt cover at the beginning of Bolt, which will be turned frequently, add this KITACOConveniencePartsK-CON Bolt cover to Bolt's head 2 / If you put it down to about 3 it will be easy to remove and turn the bottom Bolt.
I, this KITACOConveniencePartsK-CON Bolt cover to Bolt 2 / It has never been lost or dropped just by covering 3. Please do not worry.
As this KITACOConveniencePartsK - CON Bolt cover is ideal to update at once every about a year and a half, I will use this KITACOConveniencePartsK - CON Bolt cover so that it will be free shipping every time you shop with Webike. I make up for the price and try to buy it little by little.
However, this KITACOConveniencePartsK-CON Bolt cover does not reach the footsteps of Bolt who was given an Anodized Treatment, and we are not good at installing it to the place where Engine or heat rises.
With regard to its installation location, after running on Motorcycle for about 10 minutes after hanging on the Engine, if you touch Bolt with your fingertips and Bolt at a place where the temperature is not burned even if it is hot it is almost like installing this KITACOConveniencePartsK-CON Bolt cover Large I'm strong..
(Please note burns when checking. )
.
View detail
★ ★ ★ Bolt On Decoration Late ☆ ★ ★
【What made you decide the purchase?】
Among products similar to Bolt decoration covers on the market, Bolt cover of this KITACOConvenience Parts is the product with the highest quality and easy to use, so I bought it.
【How was it actually used?】
If you attach it to the Bolt to be decorated it will be as beautiful as you can make it as if you were decoding late.
【Mounting was difficult?】
Since it is only covering the target Bolt head like Cap, installation
It's very easy and it's not hard at all.
【Please tell me the installation point and hang】
If you can put it straight in parallel to the Bolt head of the target, it enters straightforwardly, but if Cap is oblique at the time of entering it is hard and it is hard to enter, please put it straight correctly before it breaks.
[Is there anything I was disappointed about?]
It is not a story to be disappointed, but it is not strong for ultraviolet rays and direct sunlight, but it is weak.
Although it is not expected to be naturally cracked indeed, it is exposed to direct sunlight, ultraviolet rays and wind and rain, the color naturally disappears and the underlying white comes out.
【Hope for Manufacturer - Please let me know if you have any improvement points]
If you cover and cover the Bolt to be decorated, you can fit firmly to the back, but if you try to remove Cap for turning Bolt it will crack at such times.
Also, because it fades due to direct sunlight, ultraviolet rays and wind and rain, we want to replace the fading terrible Cap.
In order to do so, we always have more than one inventory per Size, so if you can lower the selling price as much as possible, we are more thankful that it is easier to keep it.
【Have you compared items?】
I considered exchanging each Bolt with Bolt of Anodized Finishing, but considering maintaining the strength of the joint, I think that this KITACOConveniencePartsBolt cover is a reasonable and appropriate Decoration Rate Items.
[Others]
Bolt Each one of these heads is covered with this KITACOConveniencePartsBolt cover, but it takes a lot of numbers, but this KITACOConveniencePartsBolt cover has three types, 10mm for opposite sides, 12mm for 14mm and so on, so I / 12mm / Only 14 mm Bolt heads are decoration late using this KITACOConvenience PartsBolt cover.
.
View detail
KITACOConveniencePartsK - CONBolt cover For 12 mm across flats
【What made you decide the purchase?】
This KITACOConveniencePartsBolt cover is an Items that you can easily Dress-upCustomization easily and quickly in a short time.
【How was it actually used?】
I am wearing all this KITACOConveniencePartsBolt cover on the head of Bolt that enters. (Excluding high temperature part)
Even if this KITACOConvenience PartsBolt cover is attached, fuel efficiency will not improve or running will not be faster, but it will be fashionable and Parenthesis better without complaint.
【Mounting was difficult?】
Just put this KITACOConvenience PartsBolt cover on the head of Bolt like Cap and complete installation. it's simple.
【Please tell me the installation point and hang】
I put this KITACOConveniencePartsBolt cover on the head of Bolt and press it. Actually, if you push it to the back, if you put it in, you can not come off unless Lever is raised by Slotted screwdriver when removing it.
Moreover, if you increase Lever, this KITACOConveniencePartsBolt cover will crack with 100% chance. (You can also break even if you grab it off with Pliers. )
So when putting this KITACOConveniencePartsBolt cover on the head of Bolt do not insert it tightly enough, just keep it covered up to the position where it will not fall off, without breaking this KITACOConveniencePartsBolt cover attached at the necessary time KITACOConveniencePartsBolt Just grasp the cover with your fingertips and pull it to remove it.
(Since it will not break if you remove it with your finger, this KITACOConveniencePartsBolt cover can be reused)
[Is there anything I was disappointed about?]
I understood, but it faded due to direct sunlight and ultraviolet rays, it faded and as it is it is a poor smell so we recommend to exchange all of this KITACOConvenience PartsBolt cover every few years.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want you to make it stronger against direct sunlight and ultraviolet rays.
【Have you compared items?】
Compared to with Color Anodized FinishingBolt, this KITACOConveniencePartsBolt cover is more luxurious.
However, it fades. However, Bolt with color with Anodized Finishing fades though not so much.
.
View detail
Makeup Cover for Hexagon Bolt
【What made you decide the purchase?】
I decided to buy Bolt made by Anodized thinking to make head of martial Hexagon Bolt fashionable to Beauty with gusset which exists in each part of Motorcycle, I count Size and number in Motorcycle Parts catalog and estimate with Webike However, Bolt made by Anodized did not really like strength, but abandoned each Bolt 's Anodized.
After all it arrived, we used this KITACOConveniencePartsK-CON Bolt cover instead of Anodized, Hexagon Bolt Material : Plastic makeup Cover.
【How was it actually used?】
1pc. It will cost 70-80 yen per hit, but if you attach it to each Bolt head, it will be very elegant and very Parenthesis better.
【Mounting was difficult?】
It is easy because it only pushes into the Bolt head of each place.
【Please tell me the installation point and hang】
I think that it is safe to stop using because it may melt at the part with the heat.
Even if it does not melt with heat, there is a Demerit that resin deterioration progresses remarkably with heat and the beautiful vapor deposition ColorPlating of this KITACOConvenience Parts K-CON Bolt cover fades away.
[Is there anything I was disappointed about?]
Although it is understood, it is weak also to ultraviolet rays and direct sunlight because of weak heat.
I am using it at the moment that evaporation ColorPlating will fade quickly.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since it will be very poor and smell when it fades, I will exchange it for this new KITACOConveniencePartsK - CON Bolt cover as I see it, but since it is frequently exchanged and there are many numbers, 1pc. I recognize that 70-80 yen is a very expensive Items.
I would appreciate it if you could study the unit price a little more or to develop and provide products that are more resistant to ultraviolet rays and direct sunlight.
【Have you compared items?】
Bolt cap as an industrial product has many products for protection and protection that are inexpensive, durable and resistant to ultraviolet rays, but only products without sex appeal.
However, this KITACOConveniencePartsK-CON Bolt cover is a cosmetic product with very sexy gloss.
I always try to keep my inventory out of stock so that I can exchange it immediately.
.
View detail
Three caps in a pack. Protect your bolt heads from the elements and add that custom look. Just make sure you order the correct size for your usage. Reasonably priced and look great on my bike. Very satisfied with purchase and took less than a week to r
Three caps in a pack. Protect your bolt heads from the elements and add that custom look. Just make sure you order the correct size for your usage. Reasonably priced and look great on my bike. Very satisfied with purchase and took less than a week to reach me in Singapore. Great job WEBIKE team! View detail