Reviews
for adjustment
Repurchased to add a step on the Screen I had previously put on. View detail
I am satisfied with this price.
GCraft's CarbonPerafen is a surface [Color] I bought it to distribute the pressure with a thin Spacer with a Large tight outer diameter because it looked like it would crack with the Bolt that came with something like Clear.
The Spacer in this Series is finely Sized, which is helpful.
View detail
A wide variety of size variations to choose from
Multiple patterns of OD, ID, and thickness are available for use in various places.
This time Webike had M10Size in stock and I was planning to purchase other products, so I bought it as well.
Size, texture, etc. are perfect.
It was a great help because it was a hassle to go all the way to the Motorcycle supply store to buy the Size, which was not available at the nearby Home center.
It is not worth the hassle and cost to select and buy each Size, so if I wanted, I would have to pay 3,000 yen for a Quantity that contains multiple items and is less expensive.:I wish I had a Set product.
View detail
Instead of Washer
It was used as a Spacer when installing GIVI's Carrier.
I usually use a 6mm washer on top of a 6mm washer because it is a hassle to measure the size and prepare a spacer, but since I drop it every time I do maintenance, I replaced it with this product to improve serviceability.
It's just an ordinary Spacer, but it's nice to be able to choose from several sizes and thicknesses, etc.
From a functional standpoint, stacking Washers is sufficient, but this is a good product for those who care about appearance and serviceability.
View detail
Thank you for all your help.
I use it all the time.
Thank you again for your assistance.
Sometimes the stock is low at nearby mass retailers, etc., so Webike helps me out in such cases.
View detail
Used as Spacer for Exhaust System
When I buy a used external exhaust system, it may not have the spacer or bolt I need, so I buy it when I need it. It is very helpful that there are various sizes. View detail
Used for adjusting the width of Handlebar.
[How is it used?
The XJR1300C, which had to be inspected, was missing a handlebar width of about 10 cm, so we used four of these collars to pass the inspection.
The idea came from the Handlebar Spacer for the Z900RS from ARCHI.
Was the one you received as per Image?
It was just the right thickness, I wanted more than 22.2mm.
How was your experience with it?
Quantity:Pair (for Left and Right) To Quantity:2pc. Set by Set, and finally fixed at the Bar End of Babyface.
The inspector did not point out any particular problem, and the vehicle passed without incident with the width as stated on the inspection certificate.
View detail
No motivation, no 4mm.
Bush replacement made it thicker by an ear, so Spacer took care of it.
5mm/4.8 3mm/2.8 each, short of dimension
Quantity because it is too much trouble to shave Spacer without 4mm Lineup.:Pair (for Left and Right) Washer adjustment in non-etc.
View detail
Outer Diameter Size is helpful
I have purchased a different size before, but this time I needed something other than the one for my motorcycle and was looking for something with an outside diameter of 25mm or more and an inside diameter of 10mm, so I was very pleased with your help.
I see that they are available in a variety of thicknesses. It would be great if they were a little cheaper, but …
View detail
justification
Used for adjusting the position of the Rear Sets and for fixing Spacer.
The size and thickness choices and reasonable price are very helpful.
View detail
Suspension conversion
Bolt size conversion don't cheap Iron View detail
Thickness Size is abundant and ○
I purchased this product to adjust the position of the Bolt where the Exhaust System is installed.
The surface finish of aluminum is worse than that of Posh, but the outer diameter is slightly larger. (Posh21.6 KITACO22.0)
The variety of sizes is also very helpful because you can choose according to your needs.
View detail
Change of position
Used to change the position of the Rear Sets.
You can choose the Size, which is useful for repositioning.
View detail
I think a little more Size would be nice.
I bought 0.3mm thick with 10mm inner diameter to improve the rattling of Chinese Lever.
The result was slightly too thick to use.
I wish there was a thinner 0.1-0.2mm
View detail
Items that are one point of fashion.
It is a kind of "One point" fashionable item that is used by inserting it into the hole of the cap bolt.
So there is no relation to Spec. or durability.
One thing to keep in mind is that it is made quite tightly in terms of dimensions. It's pretty stiff when you take it off after installation. thing.
Shove a slotted screwdriver etc. into the gap. (By Lever's principle) When you remove it, don't let it slip out and hit the surrounding parts, or get hurt by your hands.
I'm deducting one star because I think it's expensive for just a Small thing.
View detail
Useful for installing UniversalParts
I bought this for the installation of the Universal Parts for adjustment The thickness can be adjusted a little bit at a time The price is a bit high, but I am very happy with the installation View detail
It could be used for the exterior
I bought it as a spacer for the M8 Bolt
I used it when the exterior, which I purchased for diversion purposes, was just a bit wide and I wanted to secure it tightly
The cutting process seemed to be carefully done, not just a color that was cut out of Pipe
The center is also out and perfect
I don't know if Anodized is being anodized, but after a few months, WhiteRust is still out I wasn't there
Anodized is not energized, so you can understand if you check the continuity, but it's too much trouble, so I didn't do it Mm
It's been clean for at least a few months, so I wonder if it's been treated in some way?
Or is it Aluminum alloy gold, which is resistant to corrosion?
If you're using it on the exterior (where it can be seen from the outside), as I am, Duralumin is hard enough to be used on an untreated If it is Aluminum alloy gold, which is relatively easy to corrode, you need to be careful depending on where you use it It is
This Universal Aluminum Collar doesn't look that hard, so it's probably I don't think it's Duralumin (if it's Duralumin, a lot of people feel like it's upscale) (I think that's why it says Duralumin)
K-CONBrand means it's a KITACO product
You can use KITACO's products with confidence, as they are brand images of good quality
To be honest, the inner and outer diameters and thickness just matched my intended use, but KITACO's I'm glad it was in the product
This color is also face-drilled, so even if you use it on the exterior like I did, it will not damage the other member It's good because it's hard to do
The fact that we put a little bit of time and effort into this is also a high point
View detail
Purchase to make Rear Sets a little out
Although it is the same as Title it is the Step Plate to make Rear Sets 10 mm outside
I attached it during Frame.
Evaluation is common as Size of this hand is almost determined.
View detail
Fixed orientation of heavy load
【What made you decide the purchase?】 Match the desired Size
【How was it actually used?】 Suitable for fixing heavy objects with a thick wall
【Was it difficult to install? (Hard parts case)】 ー
【Please tell me the point of installation and hang (in the case of Hard parts)】 ー
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ー
[Is there anything I was disappointed about?] The photo is Black but the Aluminum substrate
【Hope for Manufacturer - Please tell me if there are any improvement points; things are good, but colors are different
【Have you compared items?】 Products of Home center
[Others] Any
View detail
To those who want to tighten Design
When changing Headlight to a person outside the company, the width of the attachment part was narrow and I bought it to fill it.
Since the color of the Headlight case was Black, if you are looking for a color of Black color this product is Hit.
Wearing it, it is good to see the color of Black here more tight than the color of common Silver color!.
View detail