Reviews
Ideal for preventing damage to Number….
I noticed that the reverse side of the License Plate was getting dirty with mud and Asphalt-like substances, so I purchased this plate for two purposes:to prevent dirt from staining the plate, and to prevent damage to the License Plate since it was almost bent when the Number was caught a few times.
After installation, it is completely hidden by the License Plate, so it is not visible from the rear, but the reverse side is protected and serves as a reinforcement for the License Plate, which may be useful for Large to prevent damage.
In my case, I bought it together with ”Nasa Type Number Plate Holder Set” and did a dress-up at the same time, albeit very slightly.
The aforementioned objectives of the purchase have been fulfilled, and the rubber cap to suppress plate vibration is also a nice touch.
In my opinion, Plate seems solid, thick, and sturdy. I searched on the Net and found one with a weight of 210g in the product description. If you don't mind the slight weight of the car, I don't think it will affect your posture, but I was a little concerned about the weight of the Plate.
View detail
License Plate Base
License Plate was installed to prevent bending and staining.
The size is exactly the same as the License Plate, so it fits nicely.
I would have liked it to be a little lighter in weight.
View detail
for adjustment
Repurchased to add a step on the Screen I had previously put on. View detail
I am satisfied with this price.
GCraft's CarbonPerafen is a surface [Color] I bought it to distribute the pressure with a thin Spacer with a Large tight outer diameter because it looked like it would crack with the Bolt that came with something like Clear.
The Spacer in this Series is finely Sized, which is helpful.
View detail
A wide variety of size variations to choose from
Multiple patterns of OD, ID, and thickness are available for use in various places.
This time Webike had M10Size in stock and I was planning to purchase other products, so I bought it as well.
Size, texture, etc. are perfect.
It was a great help because it was a hassle to go all the way to the Motorcycle supply store to buy the Size, which was not available at the nearby Home center.
It is not worth the hassle and cost to select and buy each Size, so if I wanted, I would have to pay 3,000 yen for a Quantity that contains multiple items and is less expensive.:I wish I had a Set product.
View detail
Good to keep it from loosening
I purchased this product for Exhaust System fixed Bolt.
The lock is tight and will not loosen, so it can be used safely in any location where there is vibration.
View detail
Instead of Washer
It was used as a Spacer when installing GIVI's Carrier.
I usually use a 6mm washer on top of a 6mm washer because it is a hassle to measure the size and prepare a spacer, but since I drop it every time I do maintenance, I replaced it with this product to improve serviceability.
It's just an ordinary Spacer, but it's nice to be able to choose from several sizes and thicknesses, etc.
From a functional standpoint, stacking Washers is sufficient, but this is a good product for those who care about appearance and serviceability.
View detail
Thank you for all your help.
I use it all the time.
Thank you again for your assistance.
Sometimes the stock is low at nearby mass retailers, etc., so Webike helps me out in such cases.
View detail
Used as Spacer for Exhaust System
When I buy a used external exhaust system, it may not have the spacer or bolt I need, so I buy it when I need it. It is very helpful that there are various sizes. View detail
Used for adjusting the width of Handlebar.
[How is it used?
The XJR1300C, which had to be inspected, was missing a handlebar width of about 10 cm, so we used four of these collars to pass the inspection.
The idea came from the Handlebar Spacer for the Z900RS from ARCHI.
Was the one you received as per Image?
It was just the right thickness, I wanted more than 22.2mm.
How was your experience with it?
Quantity:Pair (for Left and Right) To Quantity:2pc. Set by Set, and finally fixed at the Bar End of Babyface.
The inspector did not point out any particular problem, and the vehicle passed without incident with the width as stated on the inspection certificate.
View detail
No motivation, no 4mm.
Bush replacement made it thicker by an ear, so Spacer took care of it.
5mm/4.8 3mm/2.8 each, short of dimension
Quantity because it is too much trouble to shave Spacer without 4mm Lineup.:Pair (for Left and Right) Washer adjustment in non-etc.
View detail
It's cheap and can do dress-up, but …
Easily dress-up with no tools required! … but it fades quickly lol
I've had it for a few years… but it's cheap, so why not! LOL!
View detail
The peace of mind of being able to see directly with your own eyes
As others have said, you can write your maintenance history in your phone or Memo book.
This product is not necessary, but it is something that can be directly attached to the car body for confirmation.
For some reason, there's quite a sense of security in knowing that you can do it, lol.
The durability of Sticker is also high because it sticks to the car without peeling off in the rain or car wash.
It's expensive, so it's RECOMMENDATION!
Multiple piecesQuantity:I'd be even happier if you sold the Set at a discount!
View detail
K-CON Hexagon Nut
About quality and texture The quality is good and the packaging About the feeling of use The quality was good, and there was no problem installing it Products to buy together m8 bolt, M6 Washer Difficulty of installation easy Cost performance and comparison with other products About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought it for use under various circumstances, but I installed it in the place where the linker moved and I am satisfied View detail
To MONKEY125Rear.
The KITACO product is well made, and the KITACO mark is subtly placed in the middle of the reflector, which is nice. View detail
For Setting
I purchased this for Setting.
I think anyone who looks at this product knows what effect it has, etc.
The product is exactly as described.
View detail
Stainless Steel
The bolt was replaced with a stainless steel bolt and a stainless steel spring of the same material was installed to prevent loosening.
It is Stainless Steel, contains 10 pieces, and is reasonably priced.
View detail
Stainless Steel
This is an installation to change Bolt to Stainless Steel. The price is very reasonable and the number of pieces is very reasonable. View detail
Outer Diameter Size is helpful
I have purchased a different size before, but this time I needed something other than the one for my motorcycle and was looking for something with an outside diameter of 25mm or more and an inside diameter of 10mm, so I was very pleased with your help.
I see that they are available in a variety of thicknesses. It would be great if they were a little cheaper, but …
View detail
justification
Used for adjusting the position of the Rear Sets and for fixing Spacer.
The size and thickness choices and reasonable price are very helpful.
View detail