Reviews
Copper Packing
I want to use copper packing for drain bolt when changing oil.
It was thinner and smaller than I expected.
There doesn't seem to be any oil leaks and the Seal is done, so that's good.
Quantity:1pc., cheap in terms of selling price? I wonder.
View detail
Universal and can be used in many ways
[How is it used?
The bar of the external Rear Sets was not long enough, so we put it on to extend the length.
I personally prefer longer ones because they are easier to load.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to insert between Footpeg and Footpeg Plate.
How was your experience with it?
It serves its purpose because it is used as a simple color.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It's just a color of Aluminum, so it could be a little cheaper. I thought it was a good idea.
but it is good to have a variety of Sizes to choose from.
View detail
Used to reduce rattling of Brake lever
[How is it used?
Brake lever was rattling badly and I bought it in hopes that it would get better.
The Touch feeling of the MASTER itself was not so good, but I suspected that maybe it was because the rattling was so bad that I could not press the Piston straight? I also suspected that it might be because I could not press the Piston straight.
To be honest, since it is a SmallEngine Displacement Volume for a foreign car, I thought that the rattling might be terrible combined with poor accuracy, but I tried it when I learned from an article on Webig that this Washer can reduce the rattling.
Was the one you received as per Image?
As you can see in the picture, it is just a Washer.
It is not a very expensive product, but the price of this thin Washer may be too expensive for some people...
Was the installation difficult?
Simply remove the Brake lever and insert it in between.
Washer is just on Lever, so it is a bit frustrating to have to Gap it back to MASTER.
How was your experience with it?
Actually, I first tried 0.3mm, but did not feel much change. 0.6mm with 2 layers of 0.3mm reduced rattling in a good way. However, I felt that the movement of Lever was a little reluctant or stuck, perhaps due to the two layers of 0.3mm, and I felt it was dangerous.:I settled on 1pc. Even with 0.5mm, there is some rattling, but it has been reduced to an acceptable level.
However, I did not see any large change in the touch feeling that I had expected, and I felt again that in such a case, I had no choice but to replace the entire MASTER.
[Included Parts:were they on?
Washer only.
[Was there anything that disappointed you?
nothing special
View detail
Bolt cover
Bolt, installed for protection purpose to the Nut.
It seems to be a little hard plastic and is hard to remove after installation.
Quantity:1 Set of 3pcs., the price is not that much and it will look a little better.
View detail
ScrewCover
The screws near the Exhaust System interfere with vibrations and cause scratches, so I bought this to try to protect and prevent scratches.
The colors are vibrant, not bad looking.
Quantity:1 Set of 3pcs., the installation seems to be a little stiff and difficult to remove.
View detail
2 while shopping
It's just self-satisfaction. I don't care if I don't have it.
It is a Dress-up that only those who ride the same Motorcycle will notice.
But isn't it good!
View detail
World's Strongest Loosening Washer
I bought this one after mistakenly buying a Nut with a locking nut without a locking nut, and was thinking of replacing it with a Spring Seat Gold or Nylon locking nut, but they deteriorate and can only be reused about 5 times. I was thinking of replacing them with Gold or Nylon type Nut, but they deteriorate and can be reused only about 5 times. I tried it because it seems to be reusable.
Nord-lock washer:The world's first friction-independent, non-loosening product is the non-loosening Washer developed by Nord-Lock."
The "WedgeLocking effect" caused by Cam makes it physically impossible for Bolt to spontaneously return and rotate to loosen. according to what someone said Physically impossible." That's a great thing, isn't it?
Check the bolt length and clearance something.
Run it and it doesn't loose at all. It's awesome.
View detail
To M8 with M10 color
I wanted to use the Exclusive Aluminum Spacer for M10 Screw Collar from the same K-CONBrand with M8 Bolt.
These itchy parts are very helpful.
Surprisingly, there are no conversion parts like this.
View detail
PetitCustom
PetitCustom Bolt Hole Cover for Handlebar Clamp. View detail
Shiningly glowing and looking great!
Gold color is beautiful!" and my neighbor's beautiful girl gal JK is very receptive lol!
Gold color seems to be accepted by gals… Riders who want to be accepted by gals, let's install it!
Recommendation！
View detail
On Axle Shaft
Purchased because it is easier to replace the pin every time when loosening the Axle Shaft for Chain Maintenance etc.
I think it looks good because it is Stainless Steel and there is no Rust.
View detail
Used for Belt drop
I used it to drop the Belt on my Scooter, and it is a little thicker and has the same effect as a longer Pulley boss. It is cheaper than Pulley boss, and when the belt is reduced, the washer can be removed and the drop-in effect will be restored. View detail
Fixed
The fixed nut of the Rear Sets was old, so it was replaced with a rust-resistant Stainless Steel one.
Quantity:1 Set of 2pcs. not that pricey, new, clean?
View detail
Fixing Screw section.
Flat washers are also made of stainless steel to prevent scratches and loosening. View detail
Stainless Steel
In order to use stainless steel bolts to prevent rust when fixing the parts, this washer is used to prevent loosening. View detail
Lineup of other materials would be better.
I purchased this spacer to connect the shift arm to the GEARShiftClamp when installing an external footpeg kit on my NSR250R MC21. I really wanted a Brass spacer, but they didn't have any, so I went with an Aluminum spacer. View detail
prevention of slackening
Lock nut to prevent loosening.
I am relieved to know that this will not loosen easily.
View detail
standardized article or goods
The bracket that the well nut is attached to was damaged, so I decided to replace the bracket and the well nut at the same time.
I bought the cheap KITACO parts and the OEM parts as insurance. When I compared them, I found out that they are the same product from the size to the engraving because they are standard products.
The Well nut I used this time was C-550, but there is a Large size Well nut with L at the end.
Although the price of OEM parts varies depending on the manufacturer, KITACO's well nut is generally cheaper and recommended for replacement.
View detail
rust-resistant
M10 Hexagon Nut.
The Silencer fixed Bolt on my Motorcycle fell off, so I bought and used it as a replacement.
Accuracy is normal. The finish is rather beautiful, and the plating seems to be thicker than the one sold by Rose at Home center. I think it is.
If you get the pitch right, you can install it without any problems, and there's nothing to say about it.
However, it's a little expensive, so I think it's best to just buy it on the side of something.
View detail
Good product
I used it to adjust the Exhaust Band fixation.
As a Spacer, it is neither good nor bad.
The sale of Small portions is very helpful.
View detail