Reviews
scratch-resistant
Purchased to prevent scratches when installing Fixing Screws for plastic parts.
It also helps a little to prevent over-tightening and loosening.
It contains a number of pieces and is reasonably priced.
View detail
easy to handle
It crushes moderately and serves as Packing. View detail
Change of position
Used to change the position of the Rear Sets.
You can choose the Size, which is useful for repositioning.
View detail
Screen Protection
For the Screen, I originally used a black Washer and a black low head hex bolt, but I bought this bolt from Home center, and I like the shape, but the steel rusts. I like the shape of this bolt from Home center, but it is rusty from the steel. I've painted it a few times, but I've decided to give up on it. I've decided to give up on it.:I decided to replace the screws with Stainless Steel Plus screws, and also replace the Washer, which was dirty and rusty.
The product is a little thinner and stiffer than the ones I've used in the past, but it seems to do its job well. The bolt washer that holds the cowl in place is getting damaged, so I'm thinking of ordering another Size next time.
View detail
This is good enough.
Components to be attached (Bolts and Engines) If the material is iron or cast iron, Copper Washer is sufficient. It's cheap. View detail
Even if there is a large rattle, the gap is much smaller than you think.
I bought the 0.3mm Clutch lever as a repair for the Clutch lever that had become completely rickety after years of use.
The Clutch Lever pivot is always diminishing, and even if you replace the lever, the lever will not rattle as much as you think if the lever holder is worn out, but just adding this Shim will solve the problem!
So, it's not so easy to make recommendations to everyone.
That's because even the thinnest 0.3mm would normally be difficult to insert.
I used 0.3mm at the Lever tip with nearly 20mm of up and down wobble, but even with such a loud wobble, 0.3mm is Limit.
Quantity 0.3mm on top and bottom of Lever pivot before purchase:I was going to insert 1pc. at a time, but it was impossible to insert 2pcs.
In the end, it was all I could do to put one in the bottom side of the lever, which would be the easiest to reduce.
However, if Quantity:With just 1pc. of the new product, the Lever's rattle has been dramatically improved, resulting in smooth Lever operation and no rattling, just like new.
This is not a solution for everything, but it is a recommendation for those who cannot get rid of the rattle even after replacing the lever (i.e., the lever holder is decreasing).
If I had the time, I would dare to cut down the LeverBody from the new car and put a Washer above and below each Pivot.
This way, the Lever Body's aluminum and Lever Holder's aluminum won't come in contact with each other, and the Lever Feel can be maintained for a long time if it's well greased up.
View detail
Replace Rusty Spacer with Aluminum spacer
When I was replacing the bolt on the Exhaust Bracket that holds the Swing Arm and Exhaust System, I found rust on the Spacer that goes between the two, and I was looking for some good repair parts. I was looking for some good repair parts and found this Spacer. View detail
ReassuranceManufacturer KITACO Color
I bought a used Slash guard for XJR400R, but it didn't have the attached color etc., so I used this one instead.
The color of the product is also Black, so it does not stand out strangely, and I am very satisfied because it is made carefully and inexpensively. I think that it can be used in various places because the size is also abundant.
View detail
![[K-CON Pro] License Plate Base](https://global.webike-cdn.net/photo/impression/48/48974747b5d5589e0b93446a23b9adcaL.jpg)
Accuracy is good.
In the state that I installed the Fender Eliminator Kit of DAYTONA, when I installed the Plate cover that surrounds the Number, the frame hits the Reflector of the T shape, so this time I purchased the Plate of the same size as the Number. The thickness is about 1.5mm or is it shaking because of the vibration of Idling because it is VTWIN. Because Reflector floats when I use Rubber of the anti-shivering which is attached at the time of purchase, I paste SpongeCushion on Plate and use it. I chose Black this time, but there is no unevenness in the paint, and it is moderately good, but because it is only several hundred yen different from other companies' products, I bought this one which has stock. I think that it doesn't change in any Manufacturer honestly. View detail
Spacer。
Used as Spacer for License Plate. I am satisfied. View detail
RequiredParts.
I bought this because I didn't want to stack my Washer. It looks great and Refreshing. View detail
To secure Space.
This is a very useful Parts and it is very helpful. View detail
Satisfied
This is a necessity for securing the skimmer and Space you care about. View detail
To the skimmer.
This is the kind of Parts that can reach the itchy spot. View detail
Cap Nut with internal lock
This is a Cap Nut with an internal lock.
There is no worry about falling off while driving.
Recommendation
View detail
prevention of slackening
It is purchased to prevent the License Plate Fixing Screw from falling off and loosening.
Unlike normal nut, it is Lock nut with Flange, so it is good for a little bit of safety.
View detail
Oil change essentials
Used on a cbf125. I use it all the time and it is reliable with no leaks at all.
Stock because it makes me sad when I forget to buy in Oil replacement.
View detail
Used for Cowl fastening points
[How is it used?
Used at the fastening point of Under Cowl.
How was your experience with it?
This Rubber Collar is placed between the collar and the part that is fastened with Bolt to fix the Cowl.
Cowl's Wobble will be suppressed.
It's easy to get at the supply store and is very helpful.
View detail
Cheap.
Easy to install on both sides. View detail
I was able to get the same Large size for less!
As a matter of fact, when I bought Handlebar Mounting of a certain company and was installing it, I accidentally dropped the attached Spacer by slipping my hand, and I couldn't find it as it was.
I've been in touch with the manufacturer. "There are no Repair Parts. "Please look for the same shape (they did list the dimensions) in Home centeretc." The reply, I was actually a bit confused.
So, when I searched by webike when I was in trouble, I arrived at this and was able to buy it safely.
The size was also finely engraved, so I was able to procure the exact same Large size at a lower price.
They've got plenty in stock, I order and it's here the next day!
It was really helpful
View detail