Reviews
Used to install XJR1300Slip-on Silencer
[How is it used?
Used to install XJR1300Slip-on Silencer.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Since it is an Oval shape Exhaust System, I had to shape it into an oval shape, but it was easily done by hand. Installation was also easy.
How was your experience with it?
It works fine, but I am concerned about the durability of the material since it is thin (1,2?).
[Included Parts:were they on?
It comes with.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
CB1000SF Exhaust Band
The BEET OEM exhaust band ran out after 17 years, so 2.5 years ago now I bought the KIJIMA φ130mm Band and installed it and it is about 138mm A gap of about 5? It was packed with Spacer etc., but it was damaged by Tension Therefore, I used KITACO φ 140mm BandBracket with 1mm Tension Tension adjustment was carried out with one and a half rolls of Rubber and fixed in a reasonable clamping condition (Sighs) (Got it?) In the future, we will confirm this by comparing its durability with that made by KIJIMA View detail
Spacer is required for Ф100 Silencer
When installed in Silencer of YOSHIMURA, about 10? Spacer is required. I think that it is because the outer diameter becomes smaller with the thickness of the Elastic band, but it was unexpected. I caught a friendly Nut and managed to install it. Although it is a little narrow compared to YOSHIMURABand, the glow of Stainless Steel is about the same, so I think it is a good item to go from Cost performance. View detail
Just size
Purchased with GPz 750 for Other Company Exhaust System.
Since the size in the case with the Elastic band is clearly stated, I did not get lost in the selection.
It is kind explanation.
I would like to purchase other models as well.
View detail
Affordable
I bought CREA SCOOPY 's outside Exhaust System for changing the angle with One - off. I made my own Bracket and fixed it with this band
The price is affordable "Rib" The strength of the bent portion called also is also perfectly Stainless Steel so it can be expected to be strong against rust. ... However, each part of Rubber may need Cut.
View detail
Since he bought one trial and it suited well in order to attach the Exhaust pipe and Silencer which were bought with the Webike Monitor auction, he bought it with one addition this time. Since the place which can scratch attachment rotates freely,
Since he bought one trial and it suited well in order to attach the Exhaust pipe and Silencer which were bought with the Webike Monitor
auction, he bought it with one addition this time.
Since the place which can scratch
attachment rotates freely, it is convenient.
Since it was a Silencer whose Manufacturer is different this time, and an Exhaust pipe, it was made to rotate 90 degrees and attached.
Since there was a just right Size, it was good.
View detail
It is 95 mm of free length, the recommendation attachment length of 99 - 105 mm, a diameter of a spring of 9 mm, and entering one piece. I think that it is hard to rust since construction material is a stainless. Since one side is a swivel hook, a
It is 95 mm of free length, the recommendation attachment length of 99 - 105 mm, a diameter of a spring of 9 mm, and entering one piece.
I think that it is hard to rust since construction material is a stainless.
Since one side is a swivel hook, a favorite angle can be rotated and it can attach.
View detail
It was used for repair of the collecting pipe of the moriwaki of HONDA X-4. A feeling of attachment and a wearing feeling are good touch. the spring which became old goes by little power with POKITSU, and meets by it -- coming out -- after - also
It was used for repair of the collecting pipe of the moriwaki of HONDA X-4.
A feeling of attachment and a wearing feeling are good touch.
the spring which became old goes by little power with POKITSU, and meets by it -- coming out -- after - also rusting -- since it was severe, it exchanged for the new article.
Although it is troublesome, since it can exchange freely and a feeling of adhesion is also raised, it is recommended by all means.
View detail
Since it does not feel shabbily even if it has attached, it is good. I think that a price is also an appropriate number.
Since it does not feel shabbily even if it has attached, it is good.
I think that a price is also an appropriate number.
View detail
Since the band was not attached to the purchased silencer, it purchased. Appearance and texture are good. Although goods are true circles, I am using it for an oval silencer. Since it only bends by hand, it is easy and recommended.
Since the band was not attached to the purchased silencer, it purchased.
Appearance and texture are good.
Although goods are true circles, I am using it for an oval silencer.
Since it only bends by hand, it is easy and recommended.
View detail