Reviews
Good visibility even during the daytime
It shines beautifully.
The Blinker is quite Compact and tightens up the body of the car.
View detail
For the price...
The price is reasonable, but the material is a cheap plastic.
Front and back? There are four pieces with different shapes.
With the bulge side facing out and the flat side applied to the back and the Blinker mounting nut tightened...
It is hollow and plastic, so it is dented.
I used the flat part for the back? I used the flat part for the back with the flat part for the front.
No matter how you look at it, the right price is a few hundred dollars.
I was able to use it for a while, so I'll leave it as effective.
View detail
Small
Smallish
not pass the inspection
Cannot be returned or exchanged.
View detail
The base is rubber, making it difficult to install depending on the car model.
Root is Material:The more I tighten the Bolt for Rubber, the more it shrinks, and I don't know how much to tighten.
I tried to put it on a VMAX1200, but I also have Shield on the vehicle.
The VMAX1200 Shield is often installed together with the hole for the blinker, so when the Bolt is tightened to secure the Shield, the Rubber sinks into the Shield and cannot be securely fastened.
In the end, I managed to attach it after processing, but I thought that the material of each part should also be clearly stated in the product description.
View detail
a shape like no other
It is a form of ChaftBlinker that is not often seen in stores.
It took six months to obtain the product.
The size is more compact than I expected, but it is Exactly for SS Small Tail, and even though it is small, it is bright enough to be dazzling from the front.
The texture of the LED bulbs is not so good when viewed in detail, as the LED bulbs are unevenly aligned, but this is a product priced at less than 10,000 yen, so let's call it good.
It is important to note that the display is 1.5W compared to the OEM 3W, so it will be a high flasher if it is installed on a single unit.
(Some ChaftBlinkers are also Large sturdy)
I added a 47ω resistor and adjusted it.
Also, the hole size is not the same as that of the OEM blinker, so it is not possible to attach the Washer as it is. (M8) Additional parts such as the following must be purchased.
Naturally, processing of the terminals is also required.
View detail
Fashionable design.
This time I purchased a uniform in Black.
I would like to change the back of the product in the future, as it seems that I can purchase a different color and replace it later.
The Mirror has a unique shape (wide on the inside and narrow on the outside), which may be difficult to see or not, depending on the individual. Hard to see? I had a feeling.
Mirror was slightly, just slightly distorted.
I'm not sure I'd even notice the items that came to me if I took the time to look at them. How could there be any distortion?" If you are a "yes" person, choose Mirror from JAPAN or Japan's Manufacturer.
The screw around the mounting area is no problem, as an adapter for the Opposite Thread ScrewNormal Thread Screw is also included.
Now I am wondering how much it will deteriorate over time.
View detail
Looking for a Smaller Blinker
I don't like blinkers that stick out from the tail width, and I also don't like the trendy bean-bulb style, so I ended up with the smallest possible blinker and installed it.
It came with a Bullet Type Terminal, but I think it's a little too small. I had to reattach it myself. Also, I was worried about the thin Cable, but it's still working without trouble after about a year.
It also has EMark, so it passed the inspection without modification.
View detail
Expected
It looks and visibility is perfect.
The car passed inspection without any problems.
View detail
Stylish, thin design
When it comes to thin LED Blinker, this is the shape!
It's Plastic, so the texture isn't great.
Design is Parenthesis okay.
It looks huge compared to the recently popular Polar Small Bakugan Blinker…
View detail
Japanese Vehicle Inspection CorrespondenceSize slender Mirror
The angle of Arm is adjustable, so leveling is possible.
Arm is made of Gold, MirrorBody is made of Plastic.
No blur while driving and no visibility problems.
View detail
The durability seems to be there, but it's a little chunky.
For the price, the wires are short and thin, and I felt stingy. The additional line does not interfere with lighting.
I was wondering about the impact of a 400cc single cylinder car, but it looks like it WELL compares.
I think the light is bright enough for vehicle inspection, but it's not bright enough.
If it is the setting of the array Layout of the LED ball horizontal one row, there may be a little insufficient.
View detail
Looks great, but sometimes the Wiring process is necessary.
First of all, I bought it because it looks good.
However, as is true of almost all the Blinkers made overseas, it is not possible to connect the Bullet Type Terminal to the Blinker Coupler kit made by other companies, such as KIJIMA, etc., because of the thin wiring. (This product was 0.5mm.)
In addition, because the Bullet Terminal was not attached to the Small Terminal and the Waterproof Cover was not attached, I reattached the Bullet Terminal which I had here.
(I used a hot-melt tube to connect it to the 1.25mm Wiring and then put the Bullet Terminal on.)
I'm very happy with the texture of the Blinker and the light level is bright enough that I would recommend it if you can do a wiring process.
The Plus minus instructions on the back of the warranty were novel and helpful.
View detail
Smaller than you can imagine
My first thought out of the box was Damn it!
But for a Small size, the mirrored surface is not distorted [Color] You can see backwards with Clear
Made of all-golden metal, it has a good texture and does not look cheap
It's worth the price
View detail
This is now a savior product
CROSSPlainEngine first generation 2009~, called 45B, 1KB, 14B The 2014 YZF-R1's front-side recessed blinker is quite a just fit for the 2014 YZF-R1 There are many teardrop-shaped products that fit the blinker mounting holes Most of the flashing lights are buried due to the deep mounting hole on the cowl side and cannot be seen from the front It is important to modify it in some way and make sure that it is placed in the proper position:Set had to be done
However, this product comes with a Spacer (bulky clogs) to match the 45B Cowl and The Blinker can be mounted in a position where you can see it from the front This alone makes it a very worthwhile product Connector is already installed, and the only thing you need to do is to hand-tighten the attached resin nut from behind the Cowl No instruction manual is included, but the Normal blinker is included in the package If it can be removed, the rest is only EasyInstallation It can be said with the faction which wants to return to NORMAL if necessary to be literally a savior In addition, if Spacer is removed, because it becomes only Blinker if it removes Spacer, it can be installed also in the Yamaha car It is possible
The overall design also has the feeling of being made in France and is composed of multifaceted cut Speaking of custom parts of France, RIZOMA is famous, but this is also Design is great
In addition to the front side, there is also a row of LEDs on the side, so you can see them blinking from the side or diagonally behind I can appreciate the safety aspect of this product I can appreciate the safety aspect of this product The amount of light itself is the minimum practical use and I want a little more As for the inspection, there is an EMark, but it is not acquired R50, so it is better to think that it is basically NG It's not a problem, though, because it's easy to revert to NORMAL
The BlinkerConnector has a BALI on the terminals and is a generally satisfactory product If you don't remove it, the Male terminal on the car Both Sides may be bent Only here is the caution and improvement required Because it is made in foreign countries, it is such a thing, but one of the notes on the in porter side is I think it would be better to do this The other thing is that the price is a bit high I think I'd be happy if it was about 6,000 yen including tax
View detail