Reviews
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
appearance
OEMPlate tends to crack, so I bought it for its appearance!
Check the position of the holes when installing.
I think the product is done by punching out the outside, but that process is sweet.
Looks and feels TEXTURED!
After installation, you can only see the sides, so I think we need to take care of that first.
Also, Anodized is not processed well, Red but not dyed well.
I know it's a cheap product, but I'd like to see them do a better job in that area.
I can't tell from a distance.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
I would like to install parts.
ZrX1200DAEG over RACING Sprocket Cover + ZX-14RRRelease + bremboRCSRadial master16Φ I used it for 2 days touring about 800km. The above combination did not cut the bike exactly, the GEAR did not go in well, the Neutral did not go in well, and there were many stops at traffic lights with the Clutch still in the grip. Since it was a bit stressful, we consulted with CharismaMechanic, our favorite shop, the next day. The next day, I consulted with CharismaMechanic at my favorite shop, and they told me that the thickness of this product is 3.0mm and OEM 2.5mm, … I switched back to OEM and the problem was easily solved. The product itself is not bad, but it's not a good product. The product itself is not bad. We hope this will be of some help to you. View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750
It's an Ideas product.
I was looking for a Cap that would fit well in the secondary air inlet when I found this product and purchased it immediately.
I really wanted to use the carburetor without killing the secondary air introduction function after replacing it, but the intake sound was so loud that it was tiring to ride, so I had no choice but to plug the carburetor.
When I bought it and got it in my hands, I saw this Cap. I've been hit. I thought www.
I didn't think KawasakiOEM Parts could be diverted.
Ideas fee.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Is it effective or not?
I bought this product because of the advertisement. The installation was not very clear from the Instruction Manual that came with it. I had to be a little bit smart to install the White Zircon parts, because I couldn't install them on the body of the car after installing them on the Gold bars because of the clearance. So, I installed the White Zircon parts in the company housing and then fitted them to the Gold rods. As for the effect, I think it will be determined in the years to come. The movement is Smooth, so it seems to be OK in the beginning. View detail
Fits: KAWASAKI ZEPHYR750
cost effectiveness
I bought it to try it out. The instruction manual that comes with it does not go into much detail, so if you think it's a problem, you should ask the shop to help you out. If you are familiar with maintenance of clutch wires, I think it is not so difficult. The only point is to apply oil or grease when installing the clutch wire. Tighten the screws to the specified torque using a torque wrench. I think these are the two things. As for the effect, I think it has become lighter. I would like to go touring from now on and feel the effect. I regret a little that I should have chosen Red for the color. View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100
If it has a sub-frame
I have no complaints about the product itself and I think it is a good product, but I could not install it on my Active sub-frame because it hits the chalk when I pull the chalk. I am sorry to say that I give up this time. (I think it is not possible to install the sub-frames on the ones with sub-frames, but not on the ones without sub-frames. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
There seems to be no mistake about the quality.
This is a thin switch that is required for the Kawasaki High Throttle Kit and is also used by the OEMs, so the quality of the switch seems to be quite good. The look and feel is simple, and with the same quality and performance as the OEMs, it's a good buy. Wiring processing is also not necessary with exclusive Coupler and is convenient. View detail
Fits: KAWASAKI ZEPHYR750
It's hard to feel the difference in operation!
When operating the Clutch, it is not possible to operate the Clutch due to reduced grip strength and fatigue after long hours of operation I've been looking for a product that can be improved since my GEAR doesn't fit into it more often than not 。 The following information is for your reference only
advantage
The manual with pictures was enclosed, and the work was easy to understand because the instructions are described in detail It was easy
It's a good experience to see the current state of the vehicle as we clean and lubricate the Cable which we don't usually do before replacing it I think it will be
It's a little more tiring to operate the Clutch for a long time while riding around town than before I'm late to the party, but I'm not sure I can tell the difference
It's true that a 5mm extension is not enough, but the difference in length will reduce the amount of clutch operation The difference between before and after the exchange is noticeable only by the first feeling You won't be able to do it
The weight of Single Body is light because it is machined out of aluminum
Disadvantage
Lubricate the Cable and clean and lubricate the Grip hinge before installing this product It's protocol 。 Later on, I thought that I should only replace the product before this process and make sure that the operation is the same as it was before I replaced it I thought it was because you can't feel the change without checking to see if it reduces Or, if you lubricate the Cable and clean and lubricate the Hinge of the Grip before replacing it I think you can see the difference even if you replace this part after riding in the NORMAL state
I think it's a very expensive product, but if you plan, create, and sell the same thing, it's a reasonable price to pay for the same gold I'm not sure if I would be able to sell the same product for the same amount of gold if I planned, created and sold it It makes me wonder if it's the Gold amount
View detail
It's neither good nor bad
I was hooking Screw with Tie Wrap
Somehow I purchased it and tried using it.
Refreshing and a feeling of stopping now.
Because it was made to think that it can be used for others
I feel that the shape and atmosphere of Holder is slightly floating.
, Screw's LOVE LA is resolved.
In the sense that I want a fade color there may be Custom feeling.
It may be a matter of preference, but Quality as a product feels like a cheap.
Yup.
It may be removed soon w
View detail