Reviews
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Very Nice
Very nice compliment to the Pod filters. It gives more storage and blocks the gap. It is also a nice thick quality. Just be aware that the fact that it is mounting on the tank bolt only means that it is not very positively located especially at the bottom. but it doesn't matter too much as you shouldn't put very heavy items in there anyway. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
appearance
OEMPlate tends to crack, so I bought it for its appearance!
Check the position of the holes when installing.
I think the product is done by punching out the outside, but that process is sweet.
Looks and feels TEXTURED!
After installation, you can only see the sides, so I think we need to take care of that first.
Also, Anodized is not processed well, Red but not dyed well.
I know it's a cheap product, but I'd like to see them do a better job in that area.
I can't tell from a distance.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
I would like to install parts.
ZrX1200DAEG over RACING Sprocket Cover + ZX-14RRRelease + bremboRCSRadial master16Φ I used it for 2 days touring about 800km. The above combination did not cut the bike exactly, the GEAR did not go in well, the Neutral did not go in well, and there were many stops at traffic lights with the Clutch still in the grip. Since it was a bit stressful, we consulted with CharismaMechanic, our favorite shop, the next day. The next day, I consulted with CharismaMechanic at my favorite shop, and they told me that the thickness of this product is 3.0mm and OEM 2.5mm, … I switched back to OEM and the problem was easily solved. The product itself is not bad, but it's not a good product. The product itself is not bad. We hope this will be of some help to you. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Easy
I am very happy with the look and feel of the product. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Well made product.
I bought this because I changed my carburetor to a TMR, and it is an Exclusive Design, so it fits EXACTLY in the space where the Air Cleaner Unit was removed, and the oil catch tank can be laid out SMART, and the finish is great.
We asked our favorite Custom Shop to install the product, and they were impressed with the well-thought-out product without any particular difficulty.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1200DAEG
Too many gaps and no gaps
The product itself is where I would like the dimensions to be a little more in line with the body of the car.
There are many gaps at the top and sides of Battery
ConnectorQuantity at the bottom of the Fuel Tank:2pc. Set is the Quantity:2pc. Both sets cannot be installed in the OEM position and must be removed from the ConnectorHolder and connected via aerial wiring.
I wanted to PowerfulSpec. so I had no choice but to use it.
I'd trade for something else if I could find something better, but I'm not sure there's anything better out there.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Thin Pull switch
I installed this switch on my zrx1200ZrX1200 DAEG. I could install the switch without thinking about the wiring, but I had to drill a 5mm hole in the handlebar to fix the switch in place. I put some paper tape on the handlebar and painted the protrusion of the switch and pressed it into position. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Car Type Exclusive Design
The car model Exclusive Design is the only one that is actively fitting.
The space under the Seat is also larger and easier to use because the air cleaner box has been eliminated.
The price is A little high, so the cost performance is low.
I would have liked a Stainless mesh hose for the price.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Radiponization partner
Used to convert ZrX1200 DAEG to radipon.
The price is more expensive than OEM parts, but it is reasonable considering the cost of coupler processing.
I had a hard time drilling the hole for the Handlebar. The hole was displaced and widened, the switch moved, the pin broke, and I managed to embed the EnamelBolt.
Drill holes carefully (laughs)
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
40%UP
Air cleaner, removed, so I chose this Accessory Case.
The capacity is now about 40% larger and wider.
I could probably fit a minimum of one night's worth of luggage in there!
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
I am glad I changed it.
I replaced a switch from another Manufacturer's Switch with this product. I think the price is a little high, but I am very satisfied with the design and the coupler shape of the brake switch terminal. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
I made it look like NORMAL.
I bought this product to replace my brake with Nissin Radial brake master, I could have used Z1000 OEM product, but I bought this product to install on DAEG without harness modification. I was able to install it without difficulty.
I wish the price was a little more Reasonable, but I think I bought the time and peace of mind of the processing.
The accelerator wire has been diverted from the Z1000 and the Handlebar has been made to look like a NORMAL wire.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
High Solo Installation
When installing High Solo
The Switch has been replaced.
Those of otherManufacturer are
It comes with a Switch that you don't need.
And the texture?
It was, so I was lost.
I decided on this product.
Connector shape also
Replacement was easy as it fits the OEM.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Simple around Switch
I've thought about it a lot, but I still think it's a Switch Type?
I think the drilling is Large strange because I need to drill a hole for Handlebar
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
There seems to be no mistake about the quality.
This is a thin switch that is required for the Kawasaki High Throttle Kit and is also used by the OEMs, so the quality of the switch seems to be quite good. The look and feel is simple, and with the same quality and performance as the OEMs, it's a good buy. Wiring processing is also not necessary with exclusive Coupler and is convenient. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
The product I wanted
Handlebar with Light switch, which I purchased at the same time as using High Solo I was having trouble with the Switch's Light switch because of poor contact with the Switch switch and sometimes the Light didn't turn on At times, I found this product and bought it... I want a High Solo, but I want it to look like an OEM I think it is a great product for those who View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
It's easy!
I bought it to make it a High Solo
Other companies' products have a hazard switch or something else that's not necessary
I went with this one, which is the simplest
The seller is an OEMBase, so there's not a lot of Trouble and
It is the thing that can be attached to the coupler of ZrX1200 DAEG
The thing seems to be a Z1000 thing
I think it's cheaper to use OEM and make Wiring, but
WiringThe time was saved by not having to check and make it
View detail