Reviews
Side bag can be used with the Fender Eliminator as well.
[How is it used?
Mainly used for touring Ninja1000ABS (2014) Introduced in conjunction with LED Blinker
Was the one you received as per Image?
Better looking than Image
How was your experience with it?
Side bag that could not be used with the OEM Blinker is now available because it was set to Fender Eliminator.
[Points to note]
Be careful with the handling & engagement of the RearBlinkerLEAD, the workability was not good due to the structure of the body side.
How did it compare to other products?
No comparison at this time
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
There is a gap on the License Plate side where the LEAD is taken out, so I was worried about flooding, so I used SiliconBond for Simple Waterproofing.
View detail
Aluminum is concerned about strength
For putting the new Crab on the ZX-14R
Iron, Stainless, or Titanium is better in terms of strength, but in any case, it is cheaper.
View detail
It can be used for any type of car.
Copper Washer or Aluminum Washer? I am torn between Copper Washer and Aluminum Washer, but if Banjo is Aluminum, then Aluminum it is.
If the banjo is steel like the OEM, it will be copper.
* Image from FZr MEETING
View detail
Change the thickness according to the handling.
It is convenient to have washers of different thicknesses in case you need a little more.
* Video:FZr MEETING
View detail
It can be installed in a good way.
I will refreshing it without forcing it to bend and install it.
* Video:FZr MEETING
View detail
Illusion of better driving
In the public mind, they tend to be classified as occult Goods,
This elation can only be experienced by the owner who has installed it.
The price is reasonable, but the micro-vibrations and the behavior of the Motorcycle in Curve
If you are interested, it is worth considering.
View detail
SUBFRAME Kit TYPE-2 Stupendo
As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures ------------- --------------------------------------------- As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures Powered by Google Translator View detail
Large Satisfied
Since the oil cooler for Harley-Davidson does not have a horizontal type mount type, we fabricated a mounting bracket and installed this oil cooler. The oil cooler was installed on the front frame in front of the engine through the aforementioned bracket so as not to interfere with the front fork and not to obstruct the foot space. It was installed quite nicely. View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-25
Made by Active
[How is it used?
I was looking for a decent lever because I was worried about the rattle of the Chinese lever that had been attached to my Yamaha MT-25 from the time it was delivered, and I was worried when operating the clutch.
OEM or KIJIMA products would have been fine, but I had a desire to customize it a bit, so I chose this product from the trusted ActiveBrand.
Was the one you received as per Image?
I purchased the Black color and it was exactly as pictured.
Was the installation difficult?
Since the clutch lever only needs to be replaced, it can be done in about 10 minutes with ordinary tools.
MT-25 (YZF-R25 also) requires OEM colors and washers, so confirmation is needed if changing from non-OEM.
If the OEM color is not available, it costs about 800 yen, which is high-end for just a color.
How was your experience with it?
As expected from Active, there is virtually no rattling.
I am satisfied with R's finish and the QUALITY of the product.
The play adjustment of the Clutch Wire is also infinitely adjustable, but the length of the Bolt is a bit short. (No problem in actual use in my case)
Also, the meat removal to reduce aerodynamic drag ish cool. I definitely don't feel like I can feel the impact at 250cc speeds, though! (Lol)
[Included Parts:were they on?
LeverBody only.
[Was there anything that disappointed you?
Nothing in particular!
【Review】
There is almost no rattle and the product looks good, so it is definitely better to use this one than to buy a strange Chinese Lever.
Brake levers are about twice as expensive due to their complex shape, so the Quantity:Pair (for Left and Right) If you want to have it all in one place, it will be a bit expensive.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Definitely a different ride, expensive but I'm glad I installed it.
I found out about PerformanceDamper on the Net, and after doing some research, I wanted it.
Some of the posters said that the ride quality is improved, vibration is reduced at high speeds, etc. Some of the posters said that ”if there is a special product for your Machine, you should definitely install it…”, and some even commented that the ride quality will be above a top ranking, and I was attracted to it. I was attracted to it.
Even as an amateur, I can tell the difference in ride quality from the moment I started driving, such as the absorption of road impact from bumps, and the handling (riding) when turning on the corner. In a word, I felt that the road surface impact became ”soft” on both general roads and high speed roads, and the handling and weight shift became easier to operate on the corner. And as a bonus, I can't say anything definitive because it depends on how you drive, but my personal impression/impression is that fuel economy seems to have improved a bit.
I do not customize my vehicle to a large size, and the investment of about 40,000 yen, including installation labor, was not cheap, but I am glad that I was able to experience the positive effects and improved ride quality and maneuverability.
The installation itself does not seem to be difficult, but since it is related to the Frame and Engine, we used Webig's Pit-in for safety first and to eliminate our own concerns.
View detail
Fits: YAMAHA FZR750R, SUZUKI GSF1200S, SUZUKI GSX1300R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, HONDA CB1300SF, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI GSX-R400R, SUZUKI RGV250Γ, SUZUKI RF900R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GS1200SS, SUZUKI BANDIT400
You can trust me.
I bought it from another Motorcycle and had no problems, so I trusted them. View detail
Required for Master Hose replacement
[How is it used?
Purchased a new Master Cylinder with the replacement of the old one.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
I don't think there is any other manufacturer that offers this kind of product except Active.
This is a great product, you don't have to replace the entire hose, which saves you money!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
With this, you can change the Hose from MASTER to HOSE at will.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
I don't have it, but if it were a little cheaper...
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR250RR, HONDA MONKEY125, HONDA CL500, HONDA CL250, HONDA GB350S, HONDA GB350, HONDA Super Cub C125, HONDA GROM, HONDA CB250R, HONDA MONKEY125, HONDA CB125R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250R, HONDA CB250F, HONDA CBR400R, HONDA CB250F, HONDA CB400F, HONDA CBR400R, HONDA 400X
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
If you think you're missing something...
Almost done with TW's Restore and put a Number on it.
Hmm I don't know. It's not enough.
No Reflector Sweat
I don't think I'd be caught without it.
tentatively
I feel like I've become cool.
View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Match CB1100 Fork with Initial ModelABS.
[How is it used?
The normal fork of CB1100 except RS has a caliper pitch of 62mm and 80mm. This item is for CB750 (RC42 ) It corresponds to 80mmPitch as well as etc.
The caliper side is compatible with bremboAxialCaliper 40mm.
Was the one you received as per Image?
The product seems to be Active and is working well with no accuracy or quality issues.
Was the installation difficult?
It is a Bolt On, so it is easy to install. In my case, there was a slight interference between the Caliper and the disc mounting Bolt base of the Wheel, but I was able to get it out by shifting it slightly.
How was your experience with it?
Since the Caliper position is at the top compared to the Fork of the 62mmPitch, it can go without the Hose extension. It also looks more natural.
[Included Parts:were they on?
In addition to the Instruction Manual, Bolt and Shim are included.
[Was there anything that disappointed you?
The quality of the product is not particularly problematic, but the high price is disappointing.
The recent price increase due to price revisions has made it even more expensive.
The same manufacturer's support with a 62mm pitch is often available, but the 80mm pitch one here may be special and is not available at all in the second-hand market.
View detail
A must for Brake hose replacement
There are many other inexpensive Copper Washers available as Universal Products, but they are often slightly larger in diameter or of poor quality.
In this respect, the quality of this product is stable and the texture after assembly is very good.
View detail
Wiring
I was looking for a wiring grips for a 120mm length Φ22.2 Handlebar and found this product. I was also interested in the new material Elastomer, which combines the best features of Rubber and Plastic, and decided to purchase it. View detail
Simple and beautiful Forme!
I was looking for a simple and slimmer clutch lever, and I found this one.
I prefer a little more Short lever, but I like the feel.
It feels less thick and the excellent butchering makes it feel lighter.
View detail
Very useful
This is a very convenient product to have when replacing Brake fluid. I think it is worth the price. View detail
It'll be cool!
I installed it for its appearance!
I am satisfied with the style and the large size!
But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!
Reflector is sold separately!
View detail