Reviews
Used for next Fluid replacement
With the Tube and syringe, at this price, it's a good buy.
If it's a Lever Quik Quik so far, the Fluid will pop out of the Tank.
Is this a bad way to do it?
View detail
Used for future maintenance
I used to replace the brake fluid by quiquing the lever and taking it out through the Caliper nipple. This way, I had a hard time getting the fluid out of the tank when the lever was squeezed.
Will be used next time.
View detail
It is easy if it is. Work is possible even if there is nothing. It is a tool of the said kind.
It is easy if it is.
Work is possible even if there is nothing.
It is a tool of the said kind.
View detail
BrakeMaintenance is a must for Items.
[How is it used?
I use it for daily maintenance around the brake. It is mainly used around the brake of XJR1300C and YZF-R25.
Was the one you received as per Image?
Just as shown in the Image. The feel and texture was the same as before. In fact, this is the second time I have purchased this product.
After all, since we are dealing with Fluid, if the maintenance of the tools after use is neglected, they will become brittle because they are plastic.
I thought I had used it carefully, but the tip of the Syringe broke off due to Fluid and deterioration from use, and this is the second one.
How was your experience with it?
As I said, it is easy to use. Since I often work alone, I recommend this most Large capacity Syringe.
I have another one for 30ml, but this one is Large because the amount that can be sucked out and pumped in is too high.
Large doubles as Small. Right.
[Points to note]
As mentioned earlier, it is still Material:Plastic product. It will hurt if you don't make it Beauty after use.
If the Fluid is left sticky, it will crack, and if it remains attached to Memory, Memory will disappear.
On the other hand, cleaning with Parts cleaner is also not recommended as it gives Damage.
Fluid dissolves well in water, so wash with water after use and dry before putting away.
The point when you put it away is to apply a thin coat of metal rubber to the rubber parts of the Syringe when you use it next time.
This is a highly recommended Small technique because it can be used for Smooth.
View detail
It'll make your work go faster.
I bought this for bleeding air when replacing the brake hose on my GSX-R125. I can bleed the air without it, but it makes the work faster.
If you are working alone, you may find it easier to use a longer Hose.
View detail
Cost-effective brake fluidMaintenance products
It's Syringe and Hose as you can see.
It is very useful when you put Brake fluid.
If you want to change the fluid, you don't have to use this kind of items because the air doesn't bite in the first place, but if you want to change the fluid in CaliperOH, you can use this.
Special tools for easier use (Brake Breeder) There is certainly, but because even a cheap thing costs several thousand yen, it becomes a painful expense for the Sun Machine which is not so much as an opportunity to put in Brake fluid from 1.
In this point, I think that the cost performance is good even if it buys it in the disposable sense because change comes in 1000 yen if it is this product.
If you are going to use the Hose many times, you can buy a cut of the appropriate Oil Resistant Hose at the Home center.
The drawback is that the end of the Syringe is a little weak.
Be careful not to try to forcibly insert or remove the Hose, as it may break from the root.
I think this is a good product to buy as a first step for maintenance to handle brake fluid.
However, BrakeMaintenance is directly related to safety, and it is not”large and strong” as long as this is the case, so if you are not familiar with it, you should have someone who is familiar with it attend and perform it.
View detail
It's a must-have for air removal.
It is convenient to use it to change the gear oil of Scooter. The attached 1 meter long hose is also effective. View detail
Absolutely necessary for Brake maintenance.
I used this product to replace the Brake fluid and Clutch fluid at Custom&Maintenance and was very impressed with the convenience of this product.
It's an absolute Recommendation Item because it really saves you the hassle of blowing air out and reduces the amount of new Fluid used, I recommend using it on the air intake side instead of the Fluid injector.
View detail
Good product, but Hose recommends longer!
When replacing the Hydraulic Brake Switch on a Motorcycle I bought this product because I need to replace the brake fluid
The deciding factor in the purchase
I bought it because it is a reliable brand and because I wanted to make air removal work easier I bought this one, which is shorter, because I thought it might get in the way if it was too long, but I would recommend buying the longer one! (See below.)
Impressions of use
First of all, it was easy to vent the air, and the insertion of the tube was good with no problems However, because the Hose is 15cm, you have to do all the work pretty close to the Tire The 1-meter long ones are also available, so if you're going to buy one, please use that one I recommend it, the Pump's capacity is 30ml and I had no problems with it
Products compared
Several Manufacturers at Webike have similar products, and each of them have We have considered it Finally, being a reliable Manufacturer and having some Pattern I bought this one because I can choose the type depending on my budget and purpose
【Review】
If you are about to replace your brake fluid, I would definitely recommend it However, if your budget allows, you should buy the 1m one
View detail
Hmm? I don't know
I used it to bleed the air out of the brake line, but it wasn't like you said, it was tight I used a Tie Wrap to fasten it in place, but the air from Breeder and Hose was not available There was some suction and it was not very easy to use
Radial master replacement for the initial oil fill on the MASTER side with a solid tank to It helped to inhale the oil
Normal air removal, is there any way to do it?
View detail
Excellent for Cost performance
I used it for bleeding Brake. I like it because the price is also cheap. Although it is not often used, I think that it is a product that you can use if you have one. View detail
This is useful !!
Brake line air bleeding is quite troublesome, while working simple. Although the first one shot can not quite get rid of, it can be done easily by using this.
It is also very convenient to use to extract Fluid from the Line or Caliper side normally, or put Fluid in the syringe side and push it into the Line.
Care must be taken not to cut the Oil of the Reserve tank as it can be pulled out with a lot of momentum when pulling out from the bottom.
Aside from bleeding air from the Brake line, you can also use it around water and Oil, so it is more universal that you chose a syringe with a large syringe. Of course, although we do not recommend the combination use to various places.
I used to get a large syringe at a hospital a long time ago, but now I can not do that.
As the content of the item, it is easy thing, so I think I can easily prepare substitute items with Home center etc.. In proportion to that price is high ☆ ☆ 1 less than. , But I'm thankful that you can easily get it as a motorcycle article.
View detail
This is useful !!
I got this item to exchange Brake solution, but I bought it was the correct answer.
Work becomes SPIDI and it saves time.
In order to ensure even a little valuable holiday time, I think that such products are lively and strange.
View detail
Cheap and convenient
It is useful for bleeding Brake and Clutch.
It is a moment to get out of Fluid, if you enter Fluid from Caliper side, the bleeding time is other than halving.
I think that there is no loss by buying.
View detail
Instruction Manual is also kind and recommended for those who are new
The Instruction Manual is also Recommendation for people who bleed for the first time with easy to understand.
I first exchanged my Fluid by myself, but thanks to this product I went to Smooth very much.
View detail
Essential for bleeding
Brake air bleeding does not start without this! With this, you can put Fluid in SPIDI even if Fluid is empty. View detail
Easy and cheap!
Air bleeding may be done with guts,
My hands are tiring, my posture is too bad, not a lot of fun.
But, in this case it is easy to bleed out air and fill the Fluid. But since you must understand firmly and use it, let's use it like a primitive air bleed assistance done with only Lever.
View detail
Since a Brake fluid can be poured in from the Caliper side since the injector is attached, and it is hard to mix exhaust air, it is dramatically easy-to-use. It was *5 when what has a longer Hose to a slight degree was attached if it may be a
Since a Brake fluid can be poured in from the Caliper side since the injector is attached, and it is hard to mix
exhaust air, it is dramatically easy-to-use.
It was *5 when what has a longer Hose to a slight degree was attached if it may be allowed to wish so much.
View detail
It was used for exchange of a Brake fluid. The old Fluid was extracted or it was useful for exchange of a new Fluid. clearing work has been substantially shortened rather than having extracted hard.
It was used for exchange of a Brake fluid.
The old Fluid was extracted or it was useful for exchange of a new Fluid.
clearing work has been substantially shortened rather than having extracted hard.
View detail
It is a repetition of work of valve closed and loosen for the brake fluid exchange, but fundamentally, if this is used, brake fluid exchange is only loosening a valve, it will suck up and finished! It is easy. A brake work is not necessary. However, a flu
It is a repetition of work of valve closed and loosen for the brake fluid exchange, but fundamentally, if this is used, brake fluid exchange is only loosening a valve, it will suck up and finished! It is easy. A brake work is not necessary. However, a fluid tank will become empty if it sucks up too much. Since it sucks up with splendid vigor. Extension is required. Since a price is also cheap, it may be better to buy with other parts. View detail