Reviews
It is better to insert it tightly and close it with Tie Wrap to prevent Air from entering through the Hose.
In normal use, air can be vented, but it is difficult to tell if the air is vented because air enters through the gap between the tubes.
So, insert Valve and Tube and fix them with Tie Wrap to prevent air from entering.
It comes off pretty good.
View detail
You can have them individually, if you want.
You can have individual syringes and Tubes, but Quantity:It is a set, so there is no need for hassle.
Also, the Joint that connects the syringe and Hose is also a Quantity:It's very convenient because it's a set.
When removing the syringe from the hose, it is a little difficult to remove due to friction if there is no Joint.
The Joint makes it easy to remove.
You can pull out old Fluid that is fully Tan in the syringe without any hassle.
View detail
Speed sensor
This is used for mounting the speed sensor.
I had to do some fine-tuning and bending to get it in the right position. The strength and the fixed position of the sensor itself are not a problem.
View detail
It is too large for air venting.
If you're using it to bleed air from a motorcycle, I think it's too large. 30cc might be fine.
I also replace the fluid in my car, so I decided to use 100cc.
The included Oil Resistant Hose will not come out of the Syringe when it is dry, but once it gets wet with fluid, it will easily come out of the Syringe, so be careful!
Please use the supplied Adapter to prevent Hose loss.
This Oil Resistant Hose is difficult to use, so it is better to replace it with SiliconHose to increase work efficiency.
View detail
It's good, but … expensive.
Used for air removal after Caliper OH.
You can also put in the Fluid from the bottom, put in the Fluid from the top, and then use it to put in the You can also let the air out.
It's just pricey and the rubber part inside hardened and became difficult to use in one sitting.
View detail
Easier air removal
Although it is Air which sometimes hardly comes out once it fits, once you exchange Fluids with this product, it takes less time and air bleeding has become easier. If it is short, Oil Resistant Hose is set to 1 Meter, unnecessary part is Cut. It is also aligned even at 100 and the home center, so it is difficult to think that it is somewhat expensive or not. View detail
It is necessary for SEA BASSOEMbrembo.
GSX1300R HAYABUSA Front's OEMbrembo has a Breeder without Fluid inside. Of course, you can not work unless Caliper is removed. Although Caliper can dangle dangle, you can shake Brake lever, but it is difficult to tighten and loosen Breeder with Brake operation and Timing together.
So I did not use Kore.. I pulled Piston while releasing a little bit of Breeder but I felt bubbles appearing as humpy in Hose but it seems that outside air did not come out of Caliper but outside air enters through a slight gap between Hose and Caliper. Air will not blow at all after bleeding in a normal way later.
Once I use it I can not go back to normal.
Rear brake and Clutch were able to use this product.
Oh yes, there is a Joint part at the tip of the syringe and you can freely remove Hose from the syringe Body. It is very useful, but even if you can remove Body and Joint, you can disconnect Joint from Hose. I want you to put it in the spare. I could use Hose longer and shorter, long for Caliper, short one for Brake lever side Tank
View detail
I used it to exchange Brake fluid
I used it for Brake fluid exchange of GLADIUS 650400.
I thought that I could loosen the Breather and pour out with a syringe, but Fluid did not get out well just by pulling Piston.
After all I took out Lever and pulled out.
There is hang in usage - - -
View detail
Usability is good
I tried it with Rear brake.
Although I managed to replace it somehow, it took a while because I went long without cutting Hose.
I thought it was easy to use.
Next time I will shorten Hose and I will do Front.
View detail
It purchased to Brake-line exchange.Since workability improves very much and pouring and exhaust air omission work can be done easily, they are necessaries.The Brake fluid is saved.It is a Recommendation.
It purchased to Brake-line exchange.Since
workability improves very much and pouring and exhaust air omission work can be done easily, they are necessaries.The
Brake fluid is saved.It is a Recommendation.
View detail
[Webike Monitor] Since used substitution which was bought since it seems to have been [ work ] earlier for there to be a Pump used at the time of OH of the Brake and as which may feel, and it may be, or may not be or whichever may be suffici
[Webike Monitor] Since used
substitution which was bought since it seems to have been [ work ] earlier for there to be a
Pump used at the time of OH of the Brake and as which may feel, and it may be, or may not be or whichever may be sufficient was also completed, he did not need to buy it.
View detail
It purchased in order to exchange for a Mesh hose. Even if it calls it the Pump, and I cannot think the object for Motorcycles specially. [ free ] [ an injector ] Although Hose exchange can be performed satisfactorily, when it is exhaust air omi
It purchased in order to exchange for a Mesh hose.
Even if it calls it the
Pump, and I cannot think the object for Motorcycles specially. [ free ] [ an injector ]
Although
Hose exchange can be performed satisfactorily, when it is exhaust air omission, and time was taken for a while, I do not think at all that it is easy-to-use.
I think that it is right just with merely considering a tool with a cheap price.
View detail
Brake-hose exchange is faced -- it purchased. If there is certainly nothing, it is not by impossible work, either, but it is convenient when it Is.
Brake-hose exchange is faced -- it purchased.
If there is certainly nothing, it is not by impossible work, either, but it is convenient when it
Is.
View detail
This product is used at the time without [ of a Brake fluid ] exhaust air. Shortly after structure of details carries out a Pumping roughly a little [ ], a previous black Rubber will be able to be taken. . . If I have this neighborhood improv
This product is used at the time without [ of a Brake fluid ] exhaust air.
Shortly after structure of details carries out a Pumping roughly a little [
], a previous black Rubber will be able to be taken.
.
.
If I have this neighborhood improved to a slight degree, it is somewhat regrettable although it becomes an injector which can be used more.
I think that it is a grade which is not although the
price will probably be cheap.
View detail
It purchases by a thing that power is demonstrated at the time of Caliper exchange.At the time of Caliper removal, although a Fluid is extracted, power was demonstrated, but recently [ ], it was new and did not go to putting in a Fluid
It purchases by a thing that power is demonstrated at the time of Caliper exchange.At the time of
Caliper removal, although a Fluid is extracted, power was demonstrated, but recently [
], it was new and did not go to putting in a Fluid well.In a
picking theory, when whether its way was bad put in from the Caliper side Air breeder and its work was quick,
Challenge of it was done, but whether whose way's having been unsavory and the situation where a Fluid leaks from the
root of an Air breeder generate it.
Air omission was made the Orthodox after all.
Therefore, a benefit is a half.
View detail
It used by Brake-fluid exchange today. If there is this injector, I can perform Fluid exchange by leaps and bounds, and will think that I am not. It can use by this purchase again at the time of future exchange, is cheap also in Cost, and recommend
It used by Brake-fluid exchange today.
If there is this injector, I can perform Fluid exchange by leaps and bounds, and will think that I am not.
It can use by this purchase again at the time of future exchange, is cheap also in Cost, and recommended very much.
View detail
It was used for exchange of a Fluid. I think that it becomes time reduction rather than exchanging without using. I think that you may have one since a price is not carried out so much, either.
It was used for exchange of a Fluid. I think that it becomes time reduction rather than exchanging without using. I think that you may have one since a price is not carried out so much, either. View detail
Air-bleeding at the time of brake fluid exchange was performed by the pumping of the general lever until now. The air omission tool that air-bleeding could be early performed certainly to compensate for brake hose exchange was also purchased. Although eve
Air-bleeding at the time of brake fluid exchange was performed by the pumping of the general lever until now. The air omission tool that air-bleeding could be early performed certainly to compensate for brake hose exchange was also purchased. Although every manufacturer regarded the product of this sort as alomost same, when an air goes into a brake line in large quantities, as inhalation of the fluid was too early and by the time the air fell out, a lot of fluids will be needed. It can take out by a fluid with less pumping. However, I think that it is a tool which can be used conveniently in the case of "without a top" which is said to be easy to take out from the case where there are few mixing amounts of an air, like mere fluid exchange. View detail
It is used for the first fluid exchange. Even when it is pure, the convenient injector to the hose and air-bleeding of a moderate path which can also use a brembo is a set. However, even if he would like for a hose to be short and to connect it wi
It is used for the first fluid exchange.
Even when it is pure, the convenient injector to the hose and air-bleeding of a moderate path which can also use a brembo is a set.
However, even if he would like for a hose to be short and to connect it with a waste oil bottle, it does not arrive... If internal pressure becomes high again since it is tapered shape with ordinary opening by the side of an injector, a hose is likely to separate.
View detail
He bought both short one and a long thing. I think that it is good for die length to be changeable for the die length of liking [ this one ], and a use. I merely think slightly expensive kana.
He bought both short one and a long thing.
I think that it is good for die length to be changeable for the die length of liking [ this one ], and a use.
I merely think slightly expensive kana.
View detail