Reviews
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250R, KAWASAKI Ninja250
problems that exist before they exist
First of all, the O-ring is too thick to fit.
You can't try to push or tap it in with Rubber Han and Prahan.
It's ha Gap among Active products.
View detail
Fits: KAWASAKI GPZ750F, SUZUKI GSX1100S, KAWASAKI GPZ1100, KAWASAKI GPZ900R, SUZUKI GSX750S, KAWASAKI GPZ750R, YAMAHA RZV500R, KAWASAKI GPZ750R, YAMAHA RZV500R
Can be installed on GPZ1000RX
I asked the manufacturer if it could be installed on a GPZ1000RX, but they replied that they had not confirmed that it would fit.
I thought it would probably be the same, so I bought it and was able to install it properly. However, the price is a little high.
Installation will require modification of the brake hose, which will cost quite a bit of money in total.
View detail
Satisfied with the cost performance
This is a Repeat purchase, I used it to blindfold the Fork top when I replaced the Handlebar on my GPZ900R with Other Brand Product. I am very happy with the way it looks, but the first time it came off and flew away while driving at high speed. The second time I glued it on with Bond. If it were not for this problem, the cost performance and appearance would have been perfect 100 points.... View detail
Sure, it's easy to get.
The downside is that it's airtight, and if you don't drill holes in it, the air can't get where it's going. Well, I did some personal research, and I found out that one of the manufacturers had air holes from the start, but it looks like it's already been sold.
I hadn't heard of him before I looked him up.
What you can't buy is what you get, because the XG250 TRICKER doesn't have Boots.
View detail
Installed on XG250 TRICKER
I bought it a few years ago, but it tore and I bought it again
The last one I used cracked after about two years and tore in the third year
One Side was torn, but the other side was still usable
It depends on how you use it, but I think the durability is not bad
A solid Instruction Manual is included, and the XG250 TRICKER It shows an example of installation of the system to a
The ForkOuter side is tighter and the Inner Tube side is looser
The length is just right
There are no holes in the air vent, so you'll have to empty them yourself
If you don't open it, it's quite tightly sealed and the fork sounds like a pushy sound
It's not the sloping bellows of the old off-road motorcycles
I think it can be used for classic style motorcycles
View detail
Mounting on SEROW 225 w
It installed in SEROW 225 w.
I like the appearance is Slim.
The texture is also shiny and matte finish so it looks cheesy.
Since the air holes are not open, we drilled three holes in the upper and lower center.
Another one in length. I am happy to have about 5 cm, but it can be used without problem.
I used the SEROWOEM's top Band, the bottom Band used the attached Tie Wrap that was attached to it because the attached one is too rough and it looks like it looks.
View detail
Tightly
I installed it because I did not have Boots on Tire exchange. I examined it with Net so I think Just fit! Length should be longer 2,30 mm longer, but it is ok. I am curious to hear a sound when stroke. View detail
Recommended for those who want to protect Inner Tube cheaply
I started riding the DF125 DJEBEL which was a stationary car and purchased it because the Fork Boots which had become stiff when riverbed was playing has torn..
As you can see from the photo, it is a little shorter & thinner than the OEM, so it changes to a SMART look.
Tie Wrap, Fixed Band is also included so you can install with this product only.
However, if you do not open the air hole at the time of installation, shape changes when Fork elongates, so you need to be careful.
Even if it keeps on it I think that afterwards I will protect Inner Tube without problems.
Because it is cheaper than other manufacturer's products, it is divisible as if it can not be helped.
View detail
It is cheap and saved for out-of-print cars.
Because NX 125's Fork Boots seemed to be a ghost of a lantern, I bought it for exchange.
OEM Parts Number is out of print and even afterMarket, there is no color thing close to OEM at this Size, after all it painted with dyed Q and installed.
Rubber quality is soft, the surface is not so beautiful Rubber's thickness is also firm and solid. Furthermore, because there is no air vent hole like OEM, we dealt with opening a hole before installation.
Included Parts : As for the upper and lower fixation, Gold genus Band and In Hemp palmk are attached, but without using it, I fixed it securely with the OEM's gold tool and I could secure firmly just by inserting the bottom. It does not seem to get out.
The price is cheap, Included Parts : And the Instruction Manual are solid, so I think that this is a bargain.
View detail
[ -- the Webike Monitor ] -- Texture was not quite satisfactory although I thought whether it would be reasonably priced. -- although attachment is not ready yet, a possibility of growing into Stock going as it is is high -- peevish [ come out an
[ -- the Webike Monitor ]
-- Texture was not quite satisfactory although I thought whether it would be reasonably priced. -- although
attachment is not ready yet, a possibility of growing into Stock going as it is is high -- peevish [ come out and ] --
View detail
It attached to FI XG250 TRICKER. The goods here are specified as the Option for XG250 TRICKERs of Y's-Gear Catalogue. As for a fixed Band, making is coarse although goods become a fixed Band of a Boots and the upper and lower sides.
It attached to FI XG250 TRICKER.
The goods here are specified as the Option for XG250 TRICKERs of
Y's-Gear Catalogue.
As for a fixed Band, making
is coarse although
goods become a fixed Band of a Boots and the upper and lower sides.
Although possibly it was ハズレ by chance, if a Cable tie fastens, the slot of
ブチ っ and a Hose band must become tight with ヘロヘロ thoroughly.
Also when it purchased before
, that was right, but what was prepared by itself after all was used
.
what does not have an exhaust air omission hole although the
Boots itself is satisfactory, and a Pitch --
-- since it is fine, when Sas moves, it does not expand and contract finely.
Since it is
general-purpose article, is it an unavoidable place?
that is messy although what is necessary is just to attach a
SEROW authentic positive one --
-- since it is high ...
The attached touch is touch that the Silhouette of the thin Fork may become thick.
Since it becomes the result which will seemingly be purer than the
Fork skin and a Fork guard, in a direction not to make showy, this is recommended.
An appropriate tool and knowledge are required for
attachment on the relation which removes a Fork.
Let's ask the direction with
uneasiness of the Motorcycle store.
Since the circumference of
Sas will be directly linked with an accident if it has gone wrong, cautions are required.
View detail
It was used for the front fork of GN125H. Since it was a very soft raw material, it left the pure dust seal as it was, and as it covered an it top, it equipped with it. Since it is comparatively thin softly, it is good, and on a seal, elongation m
It was used for the front fork of GN125H.
Since it was a very soft raw material, it left the pure dust seal as it was, and as it covered an it top, it equipped with it.
Since it is comparatively thin softly, it is good, and on a seal, elongation may carry out -ed and fits.
As it was, since Faulk of GN was 32 mm, since he was GABAGABA, he pasted up the rubber sheet made into the belt inside the top chord of dust boots, and united with Faulk's thickness.
More, a feeling of a classic peculiar to GN is emphasized, and has become as an aim.
I think that it is thinly [ as fork boots ] pliant, and easy to unite with any motorcycles.
View detail