Reviews
Large Satisfied
Since the oil cooler for Harley-Davidson does not have a horizontal type mount type, we fabricated a mounting bracket and installed this oil cooler. The oil cooler was installed on the front frame in front of the engine through the aforementioned bracket so as not to interfere with the front fork and not to obstruct the foot space. It was installed quite nicely. View detail
ActiveTubing separator
We are very pleased to have purchased the ActiveTubing separator.
I installed the product as soon as it arrived.
Installation was easy and Fitting was perfect.
I would like to use it again.
View detail
To Active's Wire.
I used it on Active's Accelerator Wire. It is a little Large compared to other Manufacturers, so it binds FirmlyWire. I recommend this product because it is beautifully made. The price is reasonable. View detail
ประกัยยึดสายได้อย่างพอดีสวยงาม View detail
add to
Purchased to prevent oil cooler hose interference View detail
ตรงปก ถูกใจ สั่งแล้วไม่ผิดหวัง View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R
Clean Cut
Mark the cutting point by placing a piece of masking tape around it, spray a lubricant (such as CRC) on a wide cutter knife, and cut cleanly. View detail
Quality is high, but care must be taken with Size
[How is it used?
I wanted to install ACTIVEStraightOil cooler on XJR400R, but I did not like the color of the mesh hose. For some reason, there was a Round Type with a black mesh hose, so I decided to install it as a DIY project.
How was your experience with it?
It functions well as a Heat Shrink Tube. The shrinkage is also relatively Smooth, so it is good in terms of quality.
How did it compare to other products?
It is just a Heat Shrink Tube, but it is colored to match the heat resistant hose, so it is more black than other manufacturer's products.
As for the price, I think it is a little high, partly because it is ACTIVEBrand.
Inevitably, I had to buy more, which was a moderate expense.
[Points to note]
StraightOil cooler was #6, so I bought this one #6 as well, but it was a mistake.
The Heat Shrink Tube is passed through the heat-resistant hose from the top of the mesh hose after the fitting is removed, but the hose is too exact and does not pass through properly. If you try to force it through, the mesh hose will get frayed and it will be a large disaster.
I thought it would be easier to buy #8Size because it shrinks when heat-shrunk.
I used a 19Φ made by DAYTONA in combination with the 19Φ and was able to pass it through the mesh hose without getting caught.
It would have been nice if the manufacturer could have provided a little more information about this area, but I doubt that many people would install it as a DIY project in the first place.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R
For Dress-up
This is a customization, but there is a big difference between having a customization and not having a customization.
Installation is only a matter of replacing the oil, but I think it is best to do it at the same time as the oil replacement.
View detail
ZrXRadiator's standard
I took the plunge because my OEM Radiator was deteriorating over time and it was time to replace the Coolant.
I had read and imaged the Instruction Manual on Active's homepage before purchasing the product, so it was not so difficult to install the fan bracket. It took some time to adjust the fan bracket to the exhaust pipe.
The cooling effect is excellent. In winter, on the contrary, it may get too cold, so I am planning to take measures such as putting a board between the cores.
I like the way it looks and I think it has become quite custom.
The Bracket below looks cheap and I am hoping to do something about that.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R
Appearance only.
Installation is difficult.
The banjo is aluminum, so be careful to tighten Torque.
Packing is not included and must be provided.
Looks cool.
Oil leak check is a must!
View detail
For dress-up of oil cooler hose!
[How is it used?
I purchased this product for the purpose of dress-up of the mesh hose used in the oil cooler.
The Thermostat section will be more expensive due to the extra number of pieces, but it will look better.
Was the one you received as per Image?
The quality is as good as the Image and the color Anodized is Beauty.
Was the installation difficult?
Just fit it on the end of the Mesh hose, but be careful, because if it is frayed, it will stick out of the gap and stick in your finger.
How was your experience with it?
The only effect is to make it look better, since it looks like Parts.
[Included Parts:were they on?
Hose Band is included.
[Was there anything that disappointed you?
Not particularly
I am using it with ▼Earls Mesh hose and am happy with the way it looks. I am happy with the purchase, although I will need a lot of thermostats since I am using the Thermostat in between.
View detail
Oil cooler line routing
Beauty neat and tidy. View detail
Excellent cooling effect
I bought this for summer cooling custom.
I think the water temperature rise is also slower than in NORMAL.
The water temperature rises when waiting at a traffic light, but drops as soon as the car starts running.
The NORMAL fan was a little melted, so I replaced it with an aluminum fan, but … the water temperature was so stable that I wondered if I would ever use it. The water temperature has stabilized to the point where I wonder if I will ever use it.
View detail
![45-Degrees Fitting [#6]](https://global.webike-cdn.net/photo/impression/80/800b55e2cd4d7df0917fed0262395e17L.jpg)
BlueRedAnodized, which is common in Oil line, to Black.
I used it on the oil cooler line of my GPZ900R.
The one that came with it was BlueRed Anodized, which was not to my liking, so I bought Black.
Since this is an Oil line work, if you are not confident about the installation, it would be better to leave it to PRO.
It does not affect performance, but the look and feel is now to my liking.
View detail
![[for Straight Oil Cooler Kit Repair] Outlet Port Set](https://img.webike-cdn.net/catalogue/images/3128/14051109b_TS.jpg)
Fits: HONDA VTR1000F, HONDA VTR1000F
Great Quality
Arrived quickly. Allows you to add aftermarket oil cooler with AN fittings. They are already threaded. Should fit other model Hondas ie VFR RC51 they use the same stock oil cooler dimensions. View detail
Fits: KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI ZR-7, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR750
100 percent air cooling is dangerous.
The air cooling system was my favorite, but the heat dripping and heat dissipation during summer traffic was too much for me, so I decided to install an oil cooler.
The installation is quite difficult. I tried to install it by myself, but it seemed impossible, so I asked a shop to do it for me.
The effect is there, and the heat dripping and heat radiation have been cured.
good point
Air-cooled engine, especially effective in summer.
It is cheap as Oil cooler.
The oil temperature can be maintained properly even in winter.
A bad point
It is difficult to install. I think it is impossible for an amateur.
It may not have been necessary since I don't rev to high RPMs, but it is effective in terms of preventing Engine trouble and I thought it was a good insurance policy.
View detail
Space-saving Size.
It is a product made for Motorcycle.
It's hard to see, but as you can see in the picture, the product is small and it's easy to fit in a small space.
The Pipe part and the Body part are moderately thick and seem to be strong.
The video will be attached to the appropriate one.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R
To a good Accent.
It's a little bit but it changes the look. The Silver Hose is a good accent for the black body. View detail
A decoration to put next to the oil cooler? Yes.
It's the one that goes next to the oil cooler, but it's not something that's going to happen, but the long bolts are hard to find at mass merchandisers, so the quantity:It's helpful to have a set one. Looks (strictly speaking, does it make the mounting area stronger?) It's the one of the "I'm not a fan of the color", so please use your favorite color. I guess the price is about right considering the contents, but I wonder if there is no Rose sale for Pipe only? If you have it, you can change the color depending on your mood. View detail