Reviews
![45-Degrees Fitting [#6]](https://global.webike-cdn.net/photo/impression/80/800b55e2cd4d7df0917fed0262395e17L.jpg)
BlueRedAnodized, which is common in Oil line, to Black.
I used it on the oil cooler line of my GPZ900R.
The one that came with it was BlueRed Anodized, which was not to my liking, so I bought Black.
Since this is an Oil line work, if you are not confident about the installation, it would be better to leave it to PRO.
It does not affect performance, but the look and feel is now to my liking.
View detail
![[for Straight Oil Cooler Kit Repair] Outlet Port Set](https://global.webike-cdn.net/photo/impression/ef/efb57536819921b0077f35aaebc59e03L.jpg)
Fits: HONDA APE100, HONDA APE50
Hose connection
Used for oil hose connection.
It looks, colors and beautiful, but the price is high.
This kind of connection fitting, in general, is expensive…
Since it is aluminum, we have to be careful not to deform the corners or peel off the color due to over-tightening, etc.
View detail
![90-Degrees Fitting [#8]](https://global.webike-cdn.net/photo/impression/2c/2c9e8accc24d9331a76e456ebaf34c06L.jpg)
Oil hose
Used for oil hose connection.
It is indeed expensive.
It would be helpful if it were sold at a lower price.
View detail
Clamp
It is installed for use with the oil hose clamp.
It clamps beautifully and has a nice look and feel to it.
View detail
Fits: KAWASAKI ZEPHYR1100RS, KAWASAKI ZEPHYR1100
ActiveStraight Oil Cooler Kit
After installation from OEM, when I went Okutama Touring in the summer, I was driving at 30km/h behind the car in front of me on the mountain pass.
The Oil Temperature Meter showed that the performance was almost the same as the OEM Oil cooler. I think the cooling efficiency is not good due to the narrow gap between the Core. I think PLOT and other oil coolers are better for the large threshold of heat. I think it works well for a medium-sized car.
View detail
![[for Straight Oil Cooler Kit Repair] Outlet Port Set](https://img.webike-cdn.net/catalogue/images/3128/14051109b_TS.jpg)
Fits: HONDA VTR1000F, HONDA VTR1000F
Great Quality
Arrived quickly. Allows you to add aftermarket oil cooler with AN fittings. They are already threaded. Should fit other model Hondas ie VFR RC51 they use the same stock oil cooler dimensions. View detail
Fits: KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI ZR-7, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR750
100 percent air cooling is dangerous.
The air cooling system was my favorite, but the heat dripping and heat dissipation during summer traffic was too much for me, so I decided to install an oil cooler.
The installation is quite difficult. I tried to install it by myself, but it seemed impossible, so I asked a shop to do it for me.
The effect is there, and the heat dripping and heat radiation have been cured.
good point
Air-cooled engine, especially effective in summer.
It is cheap as Oil cooler.
The oil temperature can be maintained properly even in winter.
A bad point
It is difficult to install. I think it is impossible for an amateur.
It may not have been necessary since I don't rev to high RPMs, but it is effective in terms of preventing Engine trouble and I thought it was a good insurance policy.
View detail
Space-saving Size.
It is a product made for Motorcycle.
It's hard to see, but as you can see in the picture, the product is small and it's easy to fit in a small space.
The Pipe part and the Body part are moderately thick and seem to be strong.
The video will be attached to the appropriate one.
View detail
With the exchange
I thought it was the same manufacturer's product and installed it along with the brake hose replacement. I think that the appearance of the installation part becomes good, but I wanted the screw to be the same color Black.
Is Screw really noticeable? It would be nice if the price was a little lower.
View detail
![Core Guard ARMIES [TYPE-2]](https://img.webike-cdn.net/catalogue/images/3068/p161_004_TS.jpg)
ActiveCore guard
The cooler and the Guard were matched to install it in the Oil cooler 13 step made by Active, but the Guard was small and the installation method as explained could not be done. I had no choice but to use a Tie Band to get it to fit. I am very disappointed with this product. View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R
To a good Accent.
It's a little bit but it changes the look. The Silver Hose is a good accent for the black body. View detail
![Core Guard ARMIES [TYPE-2]](https://img.webike-cdn.net/catalogue/images/3068/p161_003_TS.jpg)
It's thinner than I expected.
I'm wearing the Bagus!
It is thinner than I expected.
Those who value protection are advised to compare it to another one before making a decision.
It's not difficult to install.
It may take some time for positioning due to individual differences.
And the one I bought was
One welded part was floating.
It was too much trouble to return it, and I wanted to put it on quickly to protect the Core of the Oil cooler, so I just used it.
I hope you will inspect the products properly.
View detail
A decoration to put next to the oil cooler? Yes.
It's the one that goes next to the oil cooler, but it's not something that's going to happen, but the long bolts are hard to find at mass merchandisers, so the quantity:It's helpful to have a set one. Looks (strictly speaking, does it make the mounting area stronger?) It's the one of the "I'm not a fan of the color", so please use your favorite color. I guess the price is about right considering the contents, but I wonder if there is no Rose sale for Pipe only? If you have it, you can change the color depending on your mood. View detail
It's a little thin.
It is thinner than I was expecting. If you are looking for protection, you might want to compare it with other companies' products before you buy it. The one I purchased has a little bit of floating adhesive part. I have not heard any chattering sound at the moment, but I would like to ask for quality control because this is a famous Aftermarket parts manufacturer. View detail
It's chilly.
It is a bit wider and lower in height than the NORMAL Oil cooler, but it seems to be cooler and more efficient than the NORMAL Oil cooler because of the 10-stage Core and its thinness.
The Oil Temperature Meter seems to show a definite temperature drop of 10 degrees Celsius below NORMAL and it is cold.
This means that in the winter, you may have to worry about overcooling in reverse.
One thing to be aware of when installing is the additional Washer on the Right Side?
It would have been nice to have a neatly written order of installation.
I also installed a Core guard to prevent the Core from being damaged by the Small stone.
View detail
![Core Guard ARMIES [TYPE-2]](https://global.webike-cdn.net/photo/impression/b7/b7d2ae2a1032c9aded28e37ffacc79ecL.jpg)
I think it's well done.
I installed it in the Round core 10 stage of Active, but I think that there is an effect on a certain amount of foreign substances without reducing the cooling performance.
I don't think it's possible to wind up a small stone and hit the Core by yourself.
I think it would be better to use Screw and Plate, etc. instead of Split Pin for mounting.
View detail
I've been wanting one for a long time.
Why did I buy it? Parenthesis. It comes down to this
I don't know about the cooling effect or anything, but I'm sure it's up.
When you buy it, you can choose the Size from 11 inch 13-dan, 9inch 13-dan and 9inch 10-dan, but I don't understand the image of this....
I chose the 9Inch 13-stage. I'll post a picture so you can see it for yourself.
The price is a bit pricey, but I believe that Parenthesis became better for it.
I don't know, I had a motorcycle shop do the installation, but there didn't seem to be any problems.
View detail
It's relatively thin.
It's nice and light but thin.
Be careful if you value the protection of the Core.
It's not so difficult to install.
I remember taking some time to position it.
View detail
It's thin, so I think it provides a good amount of protection.
It is thinner than I expected.
I would say it's worth the price.
If you value protection, pay attention to that.
The product I bought was a bit crude and
Although there were parts where the net and the outer frame did not adhere well to each other
I wanted to replace it and put it on sooner rather than wait days again, so I'm using it as is.
It is not difficult to install.
I remember that it took some work to position it.
View detail
Surprisingly thin.
It is surprisingly thin, and the joint between the outer frame and the knitting part is a little floating.
I was a bit concerned about the quality control.
I want to put it on sooner rather than replace it, so I just put it on.
It's not difficult to install it, but
After positioning it, it moved and it was difficult to fix it.
Anyway, it's so thin that if a large stone hits it, the Core will be hit too.
If you are looking for more protection, you can choose a more expensive product.
View detail