Reviews
Not well made for the price.
[How is it used?
For ZX-6R G type.
If you use Fender Eliminator, you can't add Side Back because the Blinker is in the way.
Since I sometimes use it for Camping, I replaced it with this product which can hold the protrusion.
Was the installation difficult?
For Kawasaki cars, the Blinker is Coupler type.
This product cannot be attached as it is, so wiring processing is required.
Since I did not want to modify the wiring on the vehicle body side, I purchased KITACO's Kawasakifor VehicleBlinkerHarness and installed it on this product.
However, the space under the Rear Sets is limited and the resistor generates a lot of heat, so we did not use the resistor and replaced it with a blinker relay that supports LEDs to prevent high flasher. The Front has no problem even if the Valve is left as it is.
It is very easy if you have knowledge of the Wiring process, but if you do not have the tools, you may want to leave it to the store.
How was your experience with it?
There is absolutely nothing wrong with the functionality, but Wiring is Quantitative:Pair (for Left and Right) It sticks out from both ends and is a bit… spec. that can be seen in full no matter how you look at it.
It is a pity that the price is so high for an LED light, about 16,000 yen, but there is no attention to detail or consideration for the details.
[Included Parts:were they on?
Includes resistance, Tie Wrap, Clips, etc.
There is no Instruction Manual, but there is a Wiring diagram on the back of the box.
[Was there anything that disappointed you?
For this price, I would have hoped that Wiring would have made it a little easier to hide.
If you want to be picky, I think Wiring would be Refreshing to use a different LED Blinker.
[ITEMS TO BUY TOGETHER
・Electric Works Pliers、Bullet Terminal
・KITACO Kawasakifor VehicleBlinker lampConversion Harness
View detail
Large Strong?
Since I have a Fender Eliminator, the Blinker hits the Side Back, so I replaced it with this one.
For now, installation is not a problem, but when it rains or when washing the car, water gets into the Blinker lens and into the Sheng Large.
I thought it would be easy to get out because it goes in that much, but it is not easy to get out.
Still, I have not had any problems so far, perhaps because the inside is waterproof, but is this to be expected?
Water entering the Lens is not pleasant to look at, and since it is a product of this price, I wish they would have done something more about it.
View detail
Am I the only one who can see it?
The style seems to have changed considerably and I feel satisfied when wearing it.
Rear also has such a product, and it is good for a unified look when mounted with it.
Visibility is questionable.
Yes, it does shine brightly.
However, it is often said by friends who tour with me that it is difficult to tell whether the light is shining or not.
Since the visibility of the parts is such that even my friends who know that I have changed to these parts can't see them, I decided to change back to NORMAL for safety reasons, thinking that it would be even more difficult for people who are not interested in motorcycles, etc. to see them.
Installation was not difficult, as all I had to do was remove the original blinkerretc. and reinstall it, without any modifications.
View detail
ActiveLED Front Blinker Radiator shroud
A little skill is required for installation.
It is easier to work with the Cowl off.
I think it looks very Parenthesis good with Refreshing, but
When viewed from the front, it looks somewhat like Quantity:Pair (for Left and Right) It seems that the Balance of the Gap?
Shroud angle is also Quantity:Pair (for Left and Right) I don't think it's a subtle fit.
How are you all doing?
Hence the 3 stars.
View detail
Design is good, but we need resistance.
Design and build is good!
No problems with installation, except for a few things.
Because the resistor of the attachment is one, it is set to Left in the Wiring diagram, and it doesn't light because of the High flasher in the Right Side that is not set. Therefore, the resistance of 7.5Ω is necessary separately. (So, 3 stars overall)
Installation model KAWASAKI Ninja400 (18〜) (KAWASAKI car seems to be necessary)
View detail
I can't follow the instruction manual.
I followed the instruction manual and the mounting holes didn't quite fit.
When the screw hole is matched with Gap and screw hole, it is not possible to hook the screw hole when it is hooked though the Rear side is hooked with the screw stopper.
I thought the price was cheap and the design was good, but the accuracy was poor.
View detail
It is suitable for the price, but it is difficult for beginners
There are plate thickness of Bracket, BALI is also small, I can evaluate the point that OEM Parts can divert
Anyway I could not understand the Instruction Manual
Especially when building around Blinker according to Instruction Manual the tool does not enter Level
In addition, just by installing Blinker's Bracket why I am using Bolt With Hexagon Hole
Those who own only Spanner and Driver will run into hurry to the Home center
Also, Reflector necessary for regulations is not attached
It was troublesome to have to purchase separately
"If you buy this kit you can easily do Fender Eliminator" If you like it
It was a product that there was a feeling that hands could not reach it where it is itchy
View detail