Reviews
Sharp Reflector
The ReflectorSticker in the Included Parts:of the AELLAFender Eliminator Kit was not good, so I was looking up Reflector on the website and found this product.
I liked the casual design under the License Plate.
View detail
ACTIVE Reflector
Slim type Reflector.
It's a shame that the Bracket was twisted when installed and was not slightly straight.
View detail
Stylish & Compact despite Japanese Vehicle Inspection Correspondence
I was attracted by the compactness and slimness of this Japanese Vehicle Inspection Correspondence. I think it will look stylish in combination with the Fender Eliminator Kit. View detail
Required to make Fender Eliminator
I purchased this because I needed a reflector when converting to Fender Eliminator.
Installation is co-tightened with the License Plate.
Three shapes (Square, Trapezoid, Slim)
Two colors (Black, Silver)
so you can choose the one that fits your Motorcycle.
Also, note that SmallEngine Displacement Volume (125cc or less) reflector kits have different dimensions between the holes, so be careful when buying them.
View detail
With the conversion to rear fender-less... Part 2
At first, when we finished the inexpensive Rear fender-less conversion with Home center's Bracket, we used OEM reflector, but we replaced it with this one because it seemed to be able to refresh.
[AEBS] I had already replaced the LED Blinker Lamp Set when I posted my impression of it, but here it is again as an impression of this product.
View detail
ACTIVE Active Reflector Kit Type 3 Slim
It was installed on a Yamaha MT-07 in conjunction with Active's Fender Eliminator Kit.
I am satisfied with the slim shape of the product, which provides the necessary area but is not too conspicuous.
View detail
Fender Eliminator for New Model GSX1300R HAYABUSA
[How is it used?
It was installed for the Fender Eliminator of New Model GSX1300R HAYABUSA.
The Fender Eliminator Kit is used here.
Fender Eliminator Kit with LED Number (https://www.webike.net/sd/24654857)/(e.g. "I'll be back")
I didn't have any colors, so I put Silver Reflector kit on Black Fender Eliminator Kit, but it's a little bit floating, so I think I'll paint it with Spray Can soon.
Was the one you received as per Image?
I was able to mount it securely because it is from the same Active.
The only problem is that the Material is a bit flimsy and cheap for Slim.
But it doesn't look like it will distort that easily, so we'll see.
Was the installation difficult?
Because I installed it with Fender Eliminator Kit, it is not that difficult to work.
It is more Large strange to peel off the Cowl like the parquet of GSX1300R HAYABUSA to install it.
There is no Installation Instruction Manual for this product itself, but I had no trouble installing it because the Fender Eliminator Kit mentioned above had a fairly detailed Instruction Manual.
How was your experience with it?
It works fine
[Included Parts:were they on?
It was not attached specifically.
[Was there anything that disappointed you?
Webike didn't have Black in stock by chance, so I bought Silver and it was cheaper than I thought it would be.
It's easier to paint because it's plain, so maybe that's a good thing?
View detail
Simple
While conforming to safety standards
Small Type and Design is also good.
Fitting is also perfect because of the long upper and lower holes.
View detail
SlimDesign is cool.
The Design couldn't be better looking and I love it. It's a must-have for Fender Eliminator. View detail
Required when Fender Eliminator Kit is installed.
Installed in conjunction with the Fender Eliminator Kit.
It's a slim shape and doesn't stand out too much, and it's probably the only one I'd choose, given the use of the Fender Eliminator.
If I were to be extravagant, I think it would be more discreet if it were a little closer to the bottom end of Number.
I think it's a relatively good cosmetic product.
View detail
pleasant feeling
Motivation for purchase
Purchased because I bought the Active Fender Eliminator Kit
Good points
It looks neat, and I am very happy with the Japanese Vehicle Inspection Correspondence.
Points of Interest ■.
nothing special
Difficulty of installation
It's very easy to fix the number with Bolt.
View detail
The Chatter sound bothers me
This is for the same Active's Fender Eliminator Kit to be installed at the same time I chose the Of course, it's easy to install and perfectly positioned, but it's probably the Reflector's Bracket and Number itself interfered with each other (Fender of Active) and The Eliminator Kit has the Number only screwed on and floating in the air It makes a low grade Chatter sound (which is) Depending on the speed range, you won't hear anything, but at a certain speed range, it seems to resonate just right, and all the time "Gigi I hear a grating sound, "I can't see it while I'm running, so I can't be sure I can't see it while I'm running, so I can't be sure, but I'm going to get a vibration-proof rubber sheet or something next time I'll put it up Maybe that will help
The Reflector itself is an unusual trapezoidal shape, and I like that It kind of fits the impression of the grom, don't you think? Well, I like that
View detail
Larger than the image
The reflector part seems to be quite large and conspicuous
The Bracket and the Reflector look sturdy, and I have no complaints about the price, but if I had to choose, I would say that the Bracket and the Reflector are solid 2 points
Reflector part is too thick (15mm) and looks from the front of the License Plate If the top edge of the Reflector and the bottom edge of the License Plate don't match, you can't use it I'm concerned about the lack of it
Reflector can be shifted up and down to some extent, but even if you move it all the way up, you can still move it about 10mm There will be a gap between the Number and the Reflector, so the Reflector will have to be moved up a bit more I wish I could have moved it
View detail
Long and slender and stylish
It is used to make a Fender Eliminator with MT-07
The Fender Eliminator Kit is a PLOT one, but it's a combination of It was a very Refreshing butt
Just to be sure, I've had my car inspected three times with this Reflector, and I've never had it pointed out to me It is not
View detail
Reflector
Purchased to use the ActiveFender Eliminator Kit
It is designed not to interfere with the rear tire even if the suspension is moving
When used with the ActiveFender Eliminator Kit, you can use the Kit and It is mandatory to co-tighten the Number reflector
View detail
cool
The must-have Reflector for Fender Eliminator
There were several different shapes, and I chose the inverted triangle
Actually … I've bought the same product twice (lol)
The first Reflector I installed broke at the base of the T in about a month
The vibration of the Motorcycle was so bad that he couldn't bear it
Double-sided on the reverse side of the License Plate I put it on with tape
View detail
The shape is nice..
It is Stylish unlike a rectangle.
I thought that I could adjust the angle by bending by hand,
It is pretty solidly done and it is hard..
Angle adjustment was impossible.
The thing itself is satisfactory.
View detail
There is no other Design!
Design is Psycho ー.
But I heard that Ha Gap has been poor texture
I was distorted It is feeling that the center is bulging and somehow ...
Still design is good so I use it.
View detail
It is good to be refreshing.
It is assembled together with Fender Eliminator, with LED Blinker made by the company, it is only the same Manufacturer, it is easy to install and looks familiar.
It was still nice to have Fender Eliminator Kit and Set (There is also a convenience for selection because there are other Design Reflectors as well)
View detail
Despite Japanese Vehicle Inspection Correspondence Design is excellent
I made and pasted Bracket on the bottom of the License Plate Holder.
Compared to OEM, it became a refreshing and refined.
According to ACTIVE's HP, the reflective area : 10. There is 6 cm 2.
2016 / It is safe to hunt the License Plate from 4!
View detail