Reviews
Required for semiRadial master cylinder with lower connection
The OEM RS250 has a transversely mounted Brembo master cylinder, but I have changed to a semi radial master cylinder for the ZX10R, so this is the quantity of the connection part with the brake hose.:2pc. I bought a 20 degree set after carefully checking the angle of the Brake hose and the hose routing, etc. I did an ExactFit. The hose is not so difficult to install, it is just a hassle to check the position and angle many times to make sure the hose does not stick out and put stress on the connection. View detail
Essentials you need to have
Purchased for front brake radipon conversion.
Material by the fact that it is personally in direct contact with the outside air and subject to no small amount of pressure.:Stainless Steel was selected. I also purchased a black banjo adapter from Active, who also sells black banjo adapters, so I was sure it would be a good choice.
View detail
Compact
GSX1300R GSX1300R HAYABUSA Installed on a 1999 model
Material:Stainless Steel banjo adapter.
Banjo available at general Motorcycle supply stores is Goodridge (This product) or Swage line.
They differ in the thickness of the banjo section, with Goodridge's being thinner. (narrow) It is
Banjo bolt must be chosen appropriately or the oil supply line will be shifted.
In combination with Goodridge's Brake hose, which is compact around the fitting, the banjo area can be compactly accommodated by combining this product.
The Swage line's hose/fitting is also large, giving it a custom look, but this one can be put together as neatly as an OEM.
I guess it is a matter of preference as to which is better.
Also, although the manufacturer does not recommend it, the fitting part is a standard size, so it can be used in combination with other manufacturers' brake hoses and fittings as long as they match the standard.
The drawback is that Material:Although it is Stainless Steel, there are some rust-like stains or dullness after a long period of use. Dullness? The stain is like rust.
It is not Red Rust, so you have to look closely to see it, but if you buy it with the intention of using it semi-permanently, you may be a little disappointed.
View detail
Aluminum Banjo Adapter
I purchased this for my Motorcycle Overhaul. I really like the way it feels. I am still in the process of overhaul and I am looking forward to riding it after it is finished. View detail
Layout as you want it
Additional purchase to make Layout the way you want it. View detail
Layout as you want it
Additional purchase to make Layout the way you want it. View detail
I was able to Layout as I wanted. The quality is good and reliable.
I was able to Layout as I wanted. The quality is good and reliable. View detail
Layout as you want it
I was able to Layout as I wanted. The quality is good and reliable. View detail
Stainless Banjo Adapter20 degrees
Purchased for rear caliper side for cb400sf
The texture is good, and above all, it's Shiningly cool.
View detail
Stainless Banjo AdapterSIDE 20 degrees
Purchased for cb400sfRear master side
It went on without any problem.
View detail
Angle adjustment
I bought it because I needed to adjust the angle. It's easy to use, but it's Stainless, so it's a little expensive. View detail
Stainless Steel
Layout was done pretty much as shown in the Image. View detail
Stainless Steel
Layout was done pretty much as in the Image. View detail
Stainless Steel
Satisfied with the Layout to the Line as per the Image. View detail
Stainless Banjo Adapter
Stainless Banjo Adapter
Material because I don't want it to rust.:Buy Stainless Steel
Precision is very good and all Adapters have been changed to Stainless Steel
View detail
Olive for Stainless Banjo Adapter
Olive for Stainless Banjo Adapter
The Taper angle is a little different than the normal Adapter, so I thought it would be better to assemble it with a solid Adapter for Stainless Steel.
Small things, but it's better to replace them properly and ride with peace of mind.
Especially since it's Brake.
View detail
sturdy
I replaced the banjo bolt and banjo adapter when I replaced the brake hose and master cylinder. I chose Stainless black for all of them.
The texture is very good and solid. The only thing I don't like about it is the high price.
I ordered aluminum before, but the texture is cheap and lightweight. The good thing about Aluminum is that you can choose the color and it looks good, and it is cheaper than Stainless Steel. (It would be nice if Stainless Steel had a variety of colors (Black and Silver only).
Maybe it can't be done materially?
View detail
Adapter
Since the hose is also being replaced, we are replacing this one as well. I think the quality is good since they are made by the same manufacturer. The price is a little lower than other products, so it is very helpful. View detail
Used for ACPerformance line Hose
[How is it used?
It was used to renew the Brake line.
Since we used ACPerformance line hose, we chose this product, which was stated to fit without any problems.
Was the one you received as per Image?
There were no problems with the texture, etc.
Was the installation difficult?
The ACPerformance line can be fixed by turning the socket side, so the Banjo adapter itself does not need to be turned, making installation easy.
As long as you have a 13mm Spanner, you can install it.
How was your experience with it?
Naturally, there is no leakage of Brake fluid.
I like the black color, which is similar to that of the Horse, because it gives a sense of unity in color.
We also chose Straight Type, so there were no particular angular problems.
Naturally, Quantity on the MASTER side and on the Caliper side:2pc. Set is required.
[Included Parts:were they on?
This is the only product.
If you are getting a new banjo bolt, it will be attached to the new bolt, but don't forget the washer.
【Review】
I was able to use the ACPerformance line hose as described without any problems.
The angle can also be selected to some extent, making this product easy to use for those who want to customize it themselves.
View detail
From Separator
Used when turning back from Separator
20° is optimal for this installation
View detail