Reviews
Olive for Stainless Banjo Adapter
Olive for Stainless Banjo Adapter
The Taper angle is a little different than the normal Adapter, so I thought it would be better to assemble it with a solid Adapter for Stainless Steel.
Small things, but it's better to replace them properly and ride with peace of mind.
Especially since it's Brake.
View detail
In the neighboring store, since products offered were not good, an order was more mostly placed for the reserve.
In the neighboring store, since products offered were not good, an order was more mostly placed for the reserve. View detail
Straight
The brake cylinder is changed back to NORMAL, and the brake hose is changed to Straight Type in order to use it.
Stainless blackThey look good, but the price is a bit steep;
Quantity:2pc. If it's a Set purchase, it's worth it.
View detail
exchange
I bought this because I had to change the angle of the brake lever and hose.
If it is an angular item, the price is more than twice as much as the Straight item.:2pc. If you use a Set, you can exchange it for a further double, which is quite expensive.
View detail
Brake replacement
Because the installation position was changed to the lower part along with the exchange to the brake of brembo, it is impossible for Hose to connect with Straight, so I bought this 45 degree°, and it is installation.
Nice connection, and the Hose doesn't seem to be overpowered.
Stainless black, I wish it was a little cheaper, but what can I do?
View detail
They're not the same color
The picture looks like Stainless but the product I received is Black There is not a thing that cannot be used, but it is a good thing that Quantity:Pair (for Left and Right) It's sickening to be the wrong color From what I remember, there wasn't supposed to be a choice of colors.. View detail
Unlike Image
I am concerned about Material, but Stainless is too high so I made it to Aluminum Type.
Used for Brake lever part of MAJESTYS. Unlike Image, the angle was not enough, eventually I decided to buy a 30 degree adapter.
View detail
To expand Oil line
I used it for the extension of the Honda Horizontal Type Oil line instead of Brake.
Since you can choose a lot of angles, I was satisfied that I was able to make a careful way of handling.
Because it is Aluminum, you need to carefully manage Torque - -
By saying that it is suitable for the price, we are focused on COSPA.
View detail
I am happy that there is inventory
I used it for Oil line of Honda's Horizontal Type, not Brake line.
Stainless is more secure if you want to speak - - -
Budget and webike inventory were attractive and chosen.
The goods themselves are neither nor impossible. Banjo bolt is compatible with it, so you should take care.
View detail
Although tone used for the Caliper side of a CYGNUS X (SE12J) is also satisfied well, 45 degrees is easy to be the same price as expensive 30 degree.
Although
tone used for the Caliper side of a CYGNUS X (SE12J) is also satisfied well, 45 degrees is easy to be the same price as expensive
30 degree.
View detail
It attached and turned on the Master-cylinder side of a CYGNUS X (SE12J). It is a thing of 30 degrees. It is right just in angle.
It attached and turned on the Master-cylinder side of a CYGNUS X (SE12J). It is a thing of 30 degrees. It is right just in angle. View detail
If too high compared with other angles. I want you to store in a triple figure circle at least.
If too high compared with other angles. I want you to store in a triple figure circle at least. View detail
The Long-van jaw of a 90-degree Bend was used for extraction from a BMW F650GS Front ABS piping Union.It is although expression of having exchanged since unreasonableness surely came out when saying or carrying out Fork elasticity of the Steering OFF with
The Long-van jaw of a 90-degree Bend was used for extraction from a BMW F650GS Front ABS piping Union.It is although expression of having exchanged since unreasonableness surely came out when saying or carrying out Fork elasticity of the Steering OFF with all its might on the Banjo of a 45-degree Bend is exact. -- Originally the 70-degree Bend which does not have a Lineup at home is the optimal.It is the best for extraction from the part which is reversed 180 degrees and takes out a Hose from an oil-pressure extraction mouth from the first by a standard [ for
] one, for example, the Rear master cylinder of BREMBO.Although it is the feature common to
Goodridge build-a-line Stainless banjo adapter, stainless surface finish is also beautiful, and since cloth and black can be chosen, it is convenient that it can choose by the color of a Hose or liking.a time-tested product, of course -- it can use in comfort.
View detail
[Webike Monitor] It used for the Front-caliper side of BMW F650GS, etc. The Front-caliper side thinks if this 20-degree Bend is easy-to-use by many Machines. I think that beautiful surface finish is more important also from a viewpoint on
[Webike Monitor] It used for the Front-caliper side of
BMW F650GS, etc.
The Front-caliper side thinks if this 20-degree Bend is easy-to-use by many Machines.
I think that beautiful surface finish is more important also from a viewpoint on the engine performance of being hard to generate familiarity, a Crack, etc. of the bearing surface of a Sealing washer than from an aesthetic field.
It can use feeling easy as a time-tested product.
View detail
It used for the F650GS Rear-master-cylinder side (Union of an ABS oil-pressure piping end). Although it was not just going to be visible from outside, the thing of Stainless cloth was chosen from the beauty of surface finish. I think that the beauty
It used for the F650GS Rear-master-cylinder side (Union of an ABS oil-pressure piping end).
Although it was not just going to be visible from
outside, the thing of Stainless cloth was chosen from the beauty of surface finish.
I think that the beauty of surface finish is important also from a viewpoint on the engine performance of being harder to generate familiarity, a Crack, etc. of the bearing surface of a Sealing washer than an aesthetic field.
It can use feeling easy as a
time-tested product.
View detail
[Webike Monitor] It used for the ABS piping Union (-> キャルパー) of the Front the F650GS Rear-caliper side. In order to consider all as management equivalent to an Original, he wanted to use the existing 70-degree Banjo adapter for the Catalogue of
[Webike Monitor] It used for the ABS piping Union (-> キャルパー) of the Front the
F650GS Rear-caliper side.
In order to consider all as management equivalent to an Original, he wanted to use the existing 70-degree Banjo adapter for the Catalogue of its native country, but since there was no domestic handling, 45 degrees was chosen as a second best plan.
Although the Front side did not so much become a problem, the Rear-caliper side is just before like a photograph.
The
product itself is a time-tested product, and although it can use carrying out sushi relief, also want the Lineup of a 70-degree Bend by all means.
View detail
It can use for a stainless adapters. It is required when shortening a hose.
It can use for a stainless adapters.
It is required when shortening a hose.
View detail
On the banjo of the straight type of attachment on a hose, it purchases in order to contact. The almost same management became possible with it being pure.
On the banjo of the straight type of attachment on a hose, it purchases in order to contact.
The almost same management became possible with it being pure.
View detail
20 degrees was purchased in the fronts of D trucker. being not too bad -- appearance is good. But before purchasing aluminum, the recommend of considering a stainless purchase is carried out. (Since reinforcement will become anxious if you buy
20 degrees was purchased in the fronts of D trucker.
being not too bad -- appearance is good.
But before purchasing aluminum, the recommend of considering a stainless purchase is carried out.
(Since reinforcement will become anxious if you buy aluminum, he repents just for a moment.)
View detail
Since custom-made has ordered, it is single article purchase. There are goods of side 30degree by other manufacturers. Although he thought that he would carry out re-alumite treatment of it, since it did not understand how the pitch of thread woul
Since custom-made has ordered, it is single article purchase.
There are goods of side 30degree by other manufacturers.
Although he thought that he would carry out re-alumite treatment of it, since it did not understand how the pitch of thread would be different by the manufacturer, it became an order by the manufacturer.
I think that there should just be side 60degree, 90 degrees, etc. of goods.
View detail