Reviews
It's as expected.
I bought it in accordance with replacing Brake hose. I think the straight type is cheap and looks a bit better. I highly recommend it.. View detail
To Rear master
Interference with the Exhaust System in existing Stainless mesh hose (Secure Clearance) As a result of thinking to avoid this product arrived at this product. Material : Because it is Stainless Steel, it is pretty, but it is pretty finished with a beautiful Stainless Steel color?. View detail
Plating is beautiful
I bought it together with Buildaline's Brake hose. Brake hose's Banjo mounting part is Plating, so I chose this item. When installing, if too much force is put on and closing Banjo, Plating gets scratched, so caution is necessary for over tightening! Stainless Steel and Aluminum are lost, but there is a balance of Hose, so here It was good!
View detail
The angle is perfect !!
In this time, due to the introduction of Back Step, along with Rear master cylinder exchange, it was necessary to change the handling of Brake hose from MASTER and purchased this product.
angle / Shape is satisfactory.
Good shopping was done..
View detail
Reliable Brand
I chose reliable Brand and Cost performance.
This item is recommended.
Especially it can be used without problems. There is no problem in terms of function.
View detail
To expand Oil line
I used it for the extension of the Honda Horizontal Type Oil line instead of Brake.
Since you can choose a lot of angles, I was satisfied that I was able to make a careful way of handling.
Because it is Aluminum, you need to carefully manage Torque - -
By saying that it is suitable for the price, we are focused on COSPA.
View detail
I am happy that there is inventory
I used it for Oil line of Honda's Horizontal Type, not Brake line.
Stainless is more secure if you want to speak - - -
Budget and webike inventory were attractive and chosen.
The goods themselves are neither nor impossible. Banjo bolt is compatible with it, so you should take care.
View detail
I attached it to SUPER SHERPA.
I bought this at HoseSingle Body of ACPerformance line and I attached it here. I think that making is also beautiful and expensive.
I wonder if the price should be a bit cheaper if it is luxurious ww
View detail
Stainless color is good
I used it to change to Mesh hose after Brake's OH.
Because Hose is also Stainless color of GOODRIDGE, Color will be gathered to further tighten.
Recommending for people who like Dis / Red or Blue color or Simple if you exchange for Mesh hose!
View detail
Stainless Banjo Adapter
Although it is somewhat expensive, I like the products of Stainless Steel.
It looks as well, but durability is outstandingly good.
I like it very much because the making is very beautiful.
Combine with it,
Washer for Banjo is also Material : I think that it is still better if Stainless Steel is released.
The photo uses Stainless washer.
Although copper and aluminum are not useless,
Because it looks like this one.
View detail
It is still different from a certain country made
I have purchased something a little cheaper than this Gold amount at Oakoshon, but there are scratches on the contact surface with Washer? And I finished it with a grinding stone and used it.
I chose a reliable Manufacturer item so that it is properly done.
There is no problem with accuracy and finish, it seems to be able to use with confidence.
View detail
I replaced the rear brake hose when I changed the front one. I wanted to exchange it with the OEM line, but couldn't find the same 90-degrees bent one. The most bent product was this 45-degrees bent part, and I installed it by changing its routing and by
I replaced the rear brake hose when I changed the front one. I wanted to exchange it with the OEM line, but couldn't find the same 90-degrees bent one. The most bent product was this 45-degrees bent part, and I installed it by changing its routing and by making the hose longer.
I don't care about the material of this part. So I would have rated it with 5 stars if it had been made of aluminum and was cheaper.
View detail
When I mounted the NISSIN Radial Master to my motorcycle, the banjo that I had didn't have angle and hose didn't settle in right. Afterwards I replaced my handlebar with a lowered one and was feared that the fluid might leak so I purchased a one with
When I mounted the NISSIN Radial Master to my motorcycle, the banjo that I had didn't have angle and hose didn't settle in right.
Afterwards I replaced my handlebar with a lowered one and was feared that the fluid might leak so I purchased a one with 90 degrees angle.
For reference it is recommended for 45 to 70 degrees fitting. For the side you will require approximately 20 degrees.
After installation I now have space and it's much better than before.
It has great quality and the the fitting is great. Just a little expnensive.lol. But altogether I'm satisfied.
View detail
I purchased it when I was replacing my caliper. I installed it to my AC Performance Line braided hose. All you have to do is twist in the adapter on the hose side. You can chose the angle that'll suit you. You must be careful when handling
I purchased it when I was replacing my caliper.
I installed it to my AC Performance Line braided hose.
All you have to do is twist in the adapter on the hose side. You can chose the angle that'll suit you.
You must be careful when handling it because its made from soft aluminum.
If you tighten the hose on the mounting section too tight you may break the banjo adaptor ando the broken adapter may block the hose.
If you tighten it with a banjo bolt it may change shape.
We advise you to purchase a new one when replacing as you do with the crash washer.
It's too soft but as a substitute it has light weight.
No problem at all for normal use.
View detail
Although a 45-degree Adapters was used for the Rear-master side of a Nisshin, when it was this, interfering in a Swing arm did not eat on a its mind, but it purchased 90 degrees. Also in the Line of the Hose, interference also to a master became nothi
Although a 45-degree Adapters was used for the Rear-master side of a Nisshin, when it was this, interfering in a Swing arm did not eat on a its mind, but it purchased 90 degrees.
Also in the Line of the Hose, interference also to a master became nothing [ this / correct answer ] nature from before.
View detail
There are no worries about rust and a crack, and it is safe at the product made from a STAINLESS STEEL. The direction which has an angle to a slight degree although 45 degrees is not easy to go to this Motorcycle is [ whether it is also the best or ].
There are no worries about rust and a crack, and it is safe at the product made from a STAINLESS STEEL.
The direction which has an angle to a slight degree although 45 degrees is not easy to go to this Motorcycle is [ whether it is also the best or ].functionally, it is satisfactory -- it is .
View detail
It is a time-tested product Brake-related [ latest ].Since it is a STAINLESS STEEL, there are also no worries about a color fade-out peculiar to a crack or an Aluminum. However, if a Hose is individually arranged although it is cheap, on the whol
It is a time-tested product Brake-related [ latest ].Since it is a STAINLESS STEEL, there are also no worries about a color fade-out peculiar to a crack or an Aluminum.
However, if a Hose is individually arranged although it is cheap, on the whole, it will become a splendid price.
View detail
It is purchase which needs to change the degree of setting angle of a Hose because of the exchange to a webike Monitor Brembo caliper. It is not dissatisfied in quality. Since the stainless highest Black is chosen, it is natural, but even a sta
It is purchase which needs to change the degree of setting angle of a Hose because of the exchange to a webike Monitor
Brembo caliper.
It is not dissatisfied in
quality.
Since the stainless highest Black is chosen, it is natural, but even a star is a decrease in a thought that what is necessary is just to be able to buy it a little at a low price.
View detail
Although tone used for the Caliper side of a CYGNUS X (SE12J) is also satisfied well, 45 degrees is easy to be the same price as expensive 30 degree.
Although
tone used for the Caliper side of a CYGNUS X (SE12J) is also satisfied well, 45 degrees is easy to be the same price as expensive
30 degree.
View detail
It attached and turned on the Master-cylinder side of a CYGNUS X (SE12J). It is a thing of 30 degrees. It is right just in angle.
It attached and turned on the Master-cylinder side of a CYGNUS X (SE12J). It is a thing of 30 degrees. It is right just in angle. View detail