Reviews
Replaced in conjunction with MAJESTY250's MASTER replacement
Both front and rear Brakes of MAJESTY250 were replaced together to reduce the difficulty of air venting when replacing the MASTER.
Material:I chose this Banjo bolt because it was the color I wanted in Aluminum.
View detail
Purchased for Brembo.
Purchased because the length of the banjo bolt that came with the 19RCS did not fit.
I wanted Stainless anyway, but I can't spend over $1000 for Bolt lol.
It is for Brembo and can be used without any problem.
View detail
For Brembo master
When replacing the clutch hose on MainMotorcycle's XJR1300C,
Since the clutch master cylinder has been changed to brembo's 19RCS,
The 1.25 Pitch banjo bolt that came with Goodridge was not available.
1.00Pitch.
View detail
For Caliper for cbr1000rrr
Used for Caliper for cbr1000rrr
Buy NISSINCaliper for cbr1000rrr because it is the same as PitchGunGunbrembo
The quality is very good.
View detail
ParallelMount on Caliper for cbr1000rrr
Used for Caliper for cbr1000rrr
Purchased because the Pitch is bremboPitch even though it is made by NISSIN.
RequiredItems for h-typeMount
View detail
person who does the work behind the scenes
Small parts, but they are important safety parts with high precision and can be purchased with peace of mind. It is at times like this that I am glad to live in Japan.
Personally, I'm personally hoping that the standards will be aligned so that the Brake hose and Banjo bolt can be directly connected.
View detail
Stainless banjo
Purchased for cb400sf Rear brake
It's well made and looks Parenthesis good.
View detail
Stainless Steel
The quality is satisfactory with reliable Stainless Steel. View detail
Stainless banjo bolt
Material:Stainless SteelBanjo bolt
Do not rust Material:Purchased Stainless Steel
I'm replacing it for the purpose of dress-up, so it doesn't improve performance, but it does motivate me.
View detail
DoubleMountBanjo bolt for Nisshin caliper
DoubleMountBanjo bolt for Nisshin caliper
It is for Nisshin caliper and cannot be used for Brembo caliper.
I'm a little disappointed that there is no for Brembo.
It is necessary when Brake hose is made into h-type.
View detail
Air-Free Banjo Bolt Single
[How is it used?
Used for GALE SPEED's Rear brake master.
Was the one you received as per Image?
It is aluminum, so it is light, but it feels cheap compared to Stainless Steel.
Was the installation difficult?
Simply install it in place of the banjo bolt.
How was your experience with it?
Although it is possible to bleed the air from the rear brake without using a separate brake, it is more efficient to use a brake with air bleed.
[Was there anything that disappointed you?
The cap is crappy. However, it is cheaper than Stainless Steel, so it can be a compromise.
▼
Because it is aluminum, unlike stainless steel, it will crack if too much torque is applied.
View detail
Accuracy is high, quality is reliable!
[How is it used?
I bought this as a Repair for Brake hose banjo bolt.
Was the one you received as per Image?
The Screw section was as precise as the Image, and the coloring was of high quality.
Was the installation difficult?
Depending on the installation point, air bleeding may be required, but it is basically just a simple replacement.
How was your experience with it?
The sealing washer is not reusable, so I appreciate that it is included.
[Included Parts:were they on?
Sealing washer included.
[Was there anything that disappointed you?
Material:Although it is aluminum, it must be carefully installed and tightened or else it will cause wound and paint to peel off.
▼Material:Aluminum and Material:Stainless Steel is available, but Stainless Steel also corrodes in some cases, so this is a problem. Recently, Material:We are seeing a lot of Bolt in Titanium, which is more expensive but may be an option.
View detail
It is a stainless from aluminum in steel!
It is a stainless from aluminum in steel! View detail
Stainless Steel
I have a SteelBanjo bolt from OEM, but I decided to go with Stainless Steel because of its appearance. I have had some experience with aluminum bolts that have been broken off in my old Torque. View detail
Black
We installed black brake hose to match the black brake hose.
The color is simple and I like the color, though it is not noticeable.
View detail
I replaced it with Brake hose.
The quality was satisfactory without any problems.
However, I felt the price was a bit expensive.
I also bought the ↓ Banjo adapter with it.
https://www.webike.net/sd/4465941/
View detail
Brake hose replacement
I bought this stainless black to replace the Buildaline brake hose with stainless black and to connect to the Brembo caliper.
It's pricier than Aluminum … but I had to do it to unify the two. It looks nice and I like it.
View detail
ActiveBanjo bolt
I didn't see the color you were looking for!
They had it here and I bought it immediately.
Very good with a wide range of products!
View detail
The classic Banjo bolt
[How is it used?
NISSIN Brake master on ApriliaRS4 125 (https://www.webike.net/sd/1448239/) It was used to install the
I chose this product because it came up first when I looked up M10×P1.25 Banjo bolt in order of popularity.
Was the one you received as per Image?
There was a Red color setting, so I chose Red because I wanted to change it.
The multiple photos made me feel comfortable with my purchase. The one I received was exactly as pictured.
How was your experience with it?
It's no surprise, but it's not a bad performance for a Banjo bolt at all.
However, I don't know if my tool is too delicate or not. The paint on the corner came off....
To prevent fluid leakage, it is necessary to apply the torque firmly, so it is cheaper to use a proper tool.
[Products compared, etc.].
We compared it with other Manufacturer's Banjo bolt.
The price is similar, but I chose this product because it had the Red color setting and the evaluation of the impression was good.
I also had a sense of security because it was produced by a famous manufacturer called Active.
【Review】
The Banjo bolt can be used with confidence, and while it's inexpensive at 550 yen, it comes in many colors, so you have a lot of choices.
It's not so much that this product is bad, it's more that the tool is a bit lickable, so use a good tool.
View detail
StainlessBlack
I bought this Stainless Steel Black to replace the brake hose and unify it with Black.
It looks good, but I wish Washer was also Black, but I guess I can't help considering the Sealability Material.
I wish the price was a little lower.
View detail