Reviews
honda dax125 gear shift
It arrived in perfect condition and well packaged. I am delighted.
I just need to get the clutch assembly and everything is ready -------------------------------------- -------------------- He has been in perfect condition and good packed. I am delighted. I just need to get the clutch combercion and everything ready Powered by Google Translator
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
Carrier essential for long touring
We used it for long touring with Camping accommodation.
We were able to load our luggage, Camping gear, Tent, sleeping bags, etc. to stay overnight.
Full Cowl's SUPER SPORTS750 is not as loadable, though,
The Carrier increases the load capacity and
Long touring was also well handled.
Recommended for those who need to carry more luggage.
View detail
Helmet holder
I purchased this along with the Endurance Rear Carrier.
I thought that if I installed Endurance's Rear Carrier, I would not be able to attach the Helmet to the Rear Sets.
There was also a Helmet holder made by another company,
It was stated that if it is the same Endurance, it can be installed at the same time as the Rear Carrier,
I had no hesitation in purchasing the Endurance product.
With this Helmet holder fastened with Key Hook, mounting and dismounting of the helmet was easy.
Once this is installed, it will no longer be a hassle to install the Helmet on the Rear Sets.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
misaligned
The holes were not aligned and could not be installed.
I will never buy from them again.
View detail
Bag that fits CT125 well
I think it would be difficult to find a center back that feels more different than this product.
Of course, it can be installed on center carriers from other manufacturers, but
The combination of the endurance center carrier and universal holder from the same manufacturer makes for a perfect match.
My wife also complimented me on how pretty it was --------------------------------------------- ------------- Perhaps it is hard to find a center bag that is not more heterogeneous than this product. Of course, it can be installed in other manufacturer center carriers It is perfectly matched with the same manufacturer, Endurance Center Carrier and Universal Holder combination. I praised my wife for being pretty Powered by Google Translator
View detail
![[For Race] HANDLE PIPE](https://img.webike-cdn.net/catalogue/images/43939/53100KGHT02_1_TS.jpg)
Installed in late JC61
It is gutsy lower than the OEM Handlebar and is clearly easier to ride in Circuit.
It is totally comfortable for city driving.
The gap between the Switch and Tank is narrower, but there is still room for UTurn with Full Stare.
The location of the hole for attaching the Switch is not exact, so I am thinking of drilling a new hole using the original hole as a guide. (Blinker is too low and difficult to operate)
View detail
![Grip Heater 115 [Grip Heater: Repair Parts]](https://img.webike-cdn.net/catalogue/images/31601/08t50hane01_01_TS.jpg)
I'm ashamed to admit...
I'm ashamed to admit that I put the Grip on before I put the Controller on, and now it's too late.
It is impossible to remove it again with reusable Level, so I had to buy a new one at Repair Parts.
The result was expensive, but the Quantity:I'm glad it's still better than buying 2 Set. (;^ω^)
View detail
Neat and well-designed center carrier
In Korea, most center carriers are similar products. It is not too thick and is firmly fastened.
It is not clunky compared to other products and matches well with the car body.
I am attaching a photo of the bag purchased and installed from the same manufacturer. -------------------------------------------------- -------- In Korea, most of the center carriers are used as similar products. The thickness is not too thick and is fastened. Compared to other products, it is not clunky and is well matched with the body. You can also purchase and attach a bag of the same manufacturer. Powered by Google Translator
View detail
practical item
This product fits perfectly into the endurance carrier I purchased earlier. It is by far the best in terms of design and practicality.
Since it can be attached to both sides of the carrier, I plan to order and install it additionally.
Unlike other products, the finish is neat. -------------------------------------------------- -------- It is the perfect product that fits the endurance carrier first purchased. It is the best in design and practical. It can be sweet on both sides of the carrier, so it will be ordered and mounted. Unlike other products, the finish is clean. Powered by Google Translator
View detail
Fits: HONDA PCX e:HEV, HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Accent
The OEM footpeg was black rubber, so the Stainless Steel footpeg had just the right accent. The footpeg is easy to install, even for beginners. It's a bit pricey, but it's good enough! View detail
Refreshing and Style!
We chose this product because we wanted to refresh the Blinker from an OEM Fender. I considered other manufacturers, but I thought that this product, which uses OEM parts, would be easy to obtain even if the Blinker was damaged due to a fall, etc. I also thought that a product with an LED Lamp would also be a good choice if the Lamp ran out. Also, the product with LED Lamp was also chosen because we thought that if the Lamp ran out ….
I was assured that the product was thick and sturdy.
Installation is no problem as long as you follow the instruction manual without rushing.
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub 110, HONDA Super Cub 110, HONDA Super Cub 110
fits perfect for my crosscub
Quality and durability looks top notch Fits perfect for my crosscub I always purchase Endurance products with faith haha View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125
More than I expected
I originally bought it to give Lowdown for my wife, but it was also excellent as Suspension.
The city where I live is generally poor ground, and the road conditions are at the lowest level accordingly, but I can drive without worrying about such bumpy roads.
I also want to replace the front suspension.
The lower the center stand, the more force is required to set it up.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Can be installed by one person
In a certain video site, it was said that it would be difficult for one person to install the Carrier, but if you hold the Carrier from the Rear, it was easy for one person to install it.
Quantity of holes for mounting a helmet holder:Pair (for Left and Right) The room is available in the following location, but there is a caveat.
Since screws are not cut, a nut is required on the reverse side to secure the helmet holder.
Also, since the nut requires a screw lock, it is necessary to use a screw lock agent on the nut to prevent the helmet holder from being stolen by loosening the nut. Theft will be more difficult.
View detail
very attractive
[How is it used?
It's a commuter rapid train, so we can't talk about it without Carrier.
Was the one you received as per Image?
Thicker Pipe is used than expected.
Was the installation difficult?
With Side Stand, it is better to temporarily fix from the Left side (the side that is falling down).
How was your experience with it?
strong-looking
[Included Parts:were they on?
There are necessary parts, but the instruction manual is only OnLine, so please check it with your PC/smartphone etc. beforehand. You don't need to look at it to understand.
[Was there anything that disappointed you?
nothing special
View detail
Recommended Black
DAX125 has a rear carrier because the seat needs to be opened and closed when refueling.
Plating looks nicer, but I went with Black, which you can paint yourself in the future with Wound or deterioration.
A little more length would be good for loadability, but I think it is a good large size in terms of looks.
I think the feeling of use depends on your own ingenuity with Rubber net, Box, etc.
View detail
Seat is torn
The KF18 had a good texture and was comfortable with no Seat tear after 3 years, but after the KF47, the Seat started to tear after about 3 months.
I have bought it twice, and both times, the same thing happened:it started to fray from the sewing part and spread out gradually.
The quality has really deteriorated. It's perfect for comfort.Quantity:2pc. Sold both sets.
We are now OEM and this has been sufficient.
This one has a lot of demerit, such as not being able to sit down right after it rains because it is a Type that absorbs when it gets wet.
I don't do Recommendation.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel 250
Like this
I ordered the wrong model, the old one, so I have the ETC in the document slot, and I'm worried it doesn't have the claws.
In terms of height, it's not like this.
View detail
A must-have for top case! Solid and convenient.
I have RJ33M and was able to install it without any modification.
Smooth installation was completed without any particular difficulties.
I have installed GIVI's Base and it is Firmly and safely installed. Personally, I think it is a good Carrier, and I feel comfortable with it in terms of design.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
Better than I imagined.
With all due respect, I was worried about the price for the apparent brevity of the structure, but after buying it and experiencing the Fit feeling and operability, I was glad to have it at this price.
This is a RECOMMENDATION for those who are struggling!
View detail