Reviews
Fits: HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50
Large strange until you get used to it?
I will be able to downshift with my toes, but until I get used to it, is Large strange?
Other return expressions ShiftMotorcycle ownership is Reverse Shift so please make sure not to mistake ...
View detail
Fits: HONDA CRF250L, HONDA 400X, HONDA GB350, HONDA GB350S, HONDA CB400F, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750S, HONDA NC750X, HONDA NC750X, HONDA NC750X, YAMAHA XSR155, YAMAHA XSR700, YAMAHA SR400, YAMAHA SR400, SUZUKI Gixxer 250, SUZUKI V-STROM250, SUZUKI V-STROM250
good product
Good quality product. It helped me mount my Garmin GPS. On NC750X there is not much room on handlebar or any other location to mount a GPS or similar device. this mount saved me a lot of space. View detail
If you sit at the Tandem position
I want to sit at the Tandem position of the OEM, but the step gets in the way
Do not pull out? It is troublesome.
For those who like it
But I do not know where I'm sitting while driving
View detail
Fits: HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50
Downshift is now easier.
I purchased this item because CROTSCUB's first Rotary expression, heel operation was not good.
It is reversed from the Return formula but I am satisfied as I can operate it with my toes.
View detail
Fits: HONDA WAVE110, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk, HONDA Forza300, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk
It is not a special item.
This is the Universal Product that will be sent though it is a special item.
Rigidity seems to be strong, but the price is high. The same thing comes out cheaply at Yahoo auction.
View detail
Installed today- pretty straightforward installation. You need the flywheel puller tool to perform this mod! Lighter than stock with very strong magnets. Revs up much quicker!!
Installed today- pretty straightforward installation. You need the flywheel puller tool to perform this mod! Lighter than stock with very strong magnets. Revs up much quicker!! View detail
Used with GIVI 30L installed
Installation was requested to Shop so unknown about installation.
I am attached to automatic centrifugation.
Impression that looks sturdy. You can also have a bad impression on the bar.
There are five holes that can hang Net on the platform, but if the back one facing downward is facing down, it is easy to use.
Because it feels like there is no step in height with Seat, I made Back with Net, but because I slip it with BOX.
It was easy to install the Base of BOX.
View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
Tint that fits Gold
We installed in CB 1100 SC 65 Type 2.
It is more noticeable because it changes to Handlebar and makes it Gold.
Installation is easy and can be done immediately if there is Hexagonal Wrench.
It's Outclassing effect on a little ImageUp around Handlebar.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It is a good feeling ♪
3KJ - Attached to JOG ♪
It looks good as it becomes Race ish ♪
It was easy to wear a little bit of water wearing and slightly squeezing ♪
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
It is necessary for me
Since the mileage of Dio 110 exceeded 13,000 kilometers, exchanges, NORMALShoe's remaining was about 3?.
The effect is NORMAL same etc. I think so. I am satisfied because the price is reasonable and I am commuting to work..
I would like to focus on how much Life is in the future.
One thing I was concerned about is BALI near the hole that hooks Brake Shoe's Spring
Since there is no such thing in NORMAL, I thought that the quality was worth the price.
View detail
Fits: HONDA CB250F, HONDA GB250 Clubman, HONDA jade, HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA XR400 Motard, HONDA XR400 Motard, HONDA CL400, HONDA CB-1, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA VTR250, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA VRX400 R100 ROADSTER, HONDA VTR250, HONDA VTR250, HONDA VTR-F, HONDA VTR250
It does not work
It is a comparison between OEM and Mega alloy.
OEM is weak at the beginning of effect, feeling gradually getting stronger as it grips. Even if you hold it, it will not work so strongly. Life is 10000 km
Mega alloy is strong from the beginning, it gets even stronger as it grips. I can lock it when I hold it. Winding to Circuit OK. Life is 3000 km
This product strengthened at the beginning of effect, the feeling that I grasped was the same as OEM. Even if you hold it, it will not work so strongly. I do not know because Life is in use.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
I like the feeling of use.
It will be the second purchase. I purchased it with double-sided tape because it failed to install on the clutch side at the time of the first purchase, but I used it by sticking with double-sided tape, but I decided to re-purchase because I lost it while driving. Although it was described in the manual to insert the product using only water, it was difficult to wear it with this, and because there was a great possibility that it will be cut again, it is easy to slip on the product and the lever end part I tried installing it by blowing a little silicone spray so as to make it easy to install. However, after installation, if you do not degrease with a parts cleaner or the like, it will rotate with Zuzzle every time you hold the lever. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, HONDA CB250R, HONDA CB125R, HONDA CB125R, HONDA CB400SF, HONDA CB400F, HONDA CBR250R, HONDA CBR250R, HONDA GROM, HONDA GROM, HONDA CB400SB, HONDA CBR400R, HONDA CBR400R
Good priced item with a great quality, works best. The only downside is that paint started to come off only on the upper side, caused by your boots scratching. I recommend to buy the silver color.
Good priced item with a great quality, works best. The only downside is that paint started to come off only on the upper side, caused by your boots scratching. I recommend to buy the silver color. View detail
Fits: HONDA CB650F, HONDA CBR650F, HONDA REBEL250, HONDA CRF250M, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA INTEGRA, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA NC750S
2016 NC 750S RC 88 is also supported
2016 NC 750S RC 88 was also firmly compatible with.
Since the Tail lamp was originally Clear Lens
If you also unify Blinker, exchange it or not.
How about that?
I am satisfied with Large.
Well then where will I beat next?
View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
Brilliant Gold
Antlion is Matte feeling, here and POSH are Clear Color.
Easy to install, tasteful Handlebar Around the point around Large change is good.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, HONDA CB250R, HONDA CB125R, HONDA CB125R, HONDA CB400SF, HONDA CB400F, HONDA CBR250R, HONDA CBR250R, HONDA GROM, HONDA GROM, HONDA CB400SB, HONDA CBR400R, HONDA CBR400R
Slightly rattle.
Since the interval between Grom 's Change Pedal and footpeg is narrow, it was hard to raise at Riding shoes, so introduction.
Although dividing Pin was reusable, purchased at Homsen.
Installation is easy, but a little gap is created, and it gets rattled accordingly.
But, I got a gap, so I am satisfied because I was able to position the Rear brake pedal to a step easier.
View detail
The ENDURANCE Touring Rear Box 30L is actually a very well made and nice looking top box. It looks better in hand than in photo. It comes with an adapter plate and fits nicely on a Honda CB1100 (2014). The mounting and keyed ejection mechanism are no f
The ENDURANCE Touring Rear Box 30L is actually a very well made and nice looking top box. It looks better in hand than in photo. It comes with an adapter plate and fits nicely on a Honda CB1100 (2014). The mounting and keyed ejection mechanism are no fuss and work well. It easily holds a large/wide full-face helmet. Value is very good to excellent. From order to delivery was 10 calendar days (Japan --> Canada). I believe that is pretty good. Shipping packaging was solid and well done. View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It does not correspond to the thickness of Les Bar End.
As I saw that I was out of impregnation before, I put water in Parts and Lever according to the instruction manual and as a result the Brake side finally succeeded after installing on a day when the temperature was high , Clutch side has expired. The cause is due to the fact that the elasticity is small, but it is forced into the thick bar end.
As a result, we attached a thin double-sided tape on the inside of the Parts and fixed it in a form to fix it in such a way that it made it inconspicuous. When considering purchase, I think that it would be better to prepare for it to expire.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CB400F
Received with nice package. Impressive as this is my first time ordering from Japan. there are 2 holes upon removing the original handle bar. so it would be great if there is a cap to cover it. anyway. great stuff. happy with it.
Received with nice package. Impressive as this is my first time ordering from Japan. there are 2 holes upon removing the original handle bar. so it would be great if there is a cap to cover it. anyway. great stuff. happy with it. View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
As Holder is black, I changed it to Gold and saw it.
Master cylinder holder, Mirror Holder is Black, so I changed my master cylinder to Gold so I changed it to Gold the same way.
I will write a little bit of impression (Although it is a point of note)
1. Remove and remove 4 Bolt for installation and removal.
2. Replace with the attached Bolt and tighten.
3. Loosen Holder's Bolt and Body (R - Please beware of the fall as LLever itself comes off.
4. Although Holder has UPMark in OEM, it is not in Endurance made, so please pay attention to up and down.
Watching the Endo RAN Mark
5. Then alternately equalize upper and lower Bolt etc etc. If you do not tighten it will stick with a strange so always surely etc. To tighten
6. R - Check the position of L Lever and note that the angle will change as you can not fit it together.
That is my impulse.
A little anxious about OEM Holder is Exactly fit, but this product got a little clearance.
This may be the accuracy of the product, but I was a little worried
Goods changed feeling as Black replaced Gold.
View detail