Reviews
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150
Installation Notes
I think this is a good product for those who ride motorcycles "without gloves". Also, when installing it, you have to be careful when inserting it into the lever or it will tear. You may need to hang it a little. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155
It works better than OEM, but Control is not as good.
The remaining amount of Brake Pads on the Commuter Rapid NMAX has been depleted, so both front and rear were replaced.
Before the replacement I was using Golden PadX, which I was more satisfied with than OEM, but I wanted to try a different pad because it was wearing out too fast, so I chose Endurance's HG Brake Pads.
Comparison ↓.
Initial braking force
OEM<Golden<<HG
The initial bite of the HG was the best, but it felt abrupt.
When I hold Lever a little rough, I feel the posture is disturbed, OEM is not too effective, but I think HG is too effective.
Braking force of the most Large
OEM＜＜HG＜Golden
HG works well, but Golden works better.
Control system
HG
View detail
Operability.
I bought it again because it was easy to grip after installing it on my NMAX. However, the position of the nut hole was not aligned, so I had to push the nut in a little too hard. The grip is not as good as the NMAX, but the lever bend position doesn't match the NMAX, so it doesn't feel chic. I am using it while wondering if it is because they are summer gloves, if they are thicker gloves for winter, or if my grip position is not good enough. View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA ZOOMERX
Looks great! Feels like...
[How is it used?
It is installed in PCX (JF81) of commuting Spec. and is using it lightly.
Was the one you received as per Image?
I'm happy with the look and quality as per the image.
I chose Red this time, but this one also matched the overall Image!
Was the installation difficult?
With the help of the Instruction Manual and YouTube, I was able to install without any problems.
How was your experience with it?
The function is enough as well as NORMAL!
The Lever adjustment function is not as wide as I expected, and I feel a little disappointed, but there is no problem in operation, and there is no obstacle in use.
I gave it an overall rating of 3 because the original adjustment function fell short of my expectations.
[Included Parts:were they on?
I had all the parts I needed.
[Was there anything that disappointed you?
There is no large hindrance in use, but the adjustment function that I expected to purchase this product was not as I thought.
We intended to improve braking maneuverability by adjusting the distance between the Grip and the NORMAL, which seemed too wide at the time, but we were unable to achieve the desired results.
I was hoping there would be a little more adjustment range to make it narrower.
However, we understand that not all products of all models will have such a result due to the safety assurance by the manufacturer and the Rose variation of the clearance caused by individual differences. Unfortunately. In my case, I could not get enough result.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Maybe there is an individual adjustment Technique.
I think it would be very helpful if these techniques and safety measures as a manufacturer were added to the handling instruction manual.
In effect, the safety aspects have been fully explained.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
Lever grip
Brought it to use better grip for brake lever and clutch. Not easy to install. During install need use some trick to put in lever. Comfort and nice looking View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
Performance is disappointing
I bought it to solve the shortage of air at high speed.
Although it is proven with old PCX 150 to solve by attaching Power Filter
I bought this product because of a pain..
I was wondering if there was more air volume than OEM, I could not feel it.
Clearance is Limit when you turn on this product.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
Ordinary
PCX 150 purchased because the mixture will run short with high revolution.
I understand that Power Filter is good, but because it is not much space under Seat
Buy with this product if it can be improved somewhat.
It is subtle. It should have more air than NORMAL's Filter, but as much as I thought
There is no effect.
It is good in terms of flassiebo effect, but Clearance is Limit.
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
It is necessary for me
Since the mileage of Dio 110 exceeded 13,000 kilometers, exchanges, NORMALShoe's remaining was about 3?.
The effect is NORMAL same etc. I think so. I am satisfied because the price is reasonable and I am commuting to work..
I would like to focus on how much Life is in the future.
One thing I was concerned about is BALI near the hole that hooks Brake Shoe's Spring
Since there is no such thing in NORMAL, I thought that the quality was worth the price.
View detail
Fits: HONDA CB250F, HONDA GB250 Clubman, HONDA jade, HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA XR400 Motard, HONDA XR400 Motard, HONDA CL400, HONDA CB-1, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA VTR250, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA VRX400 R100 ROADSTER, HONDA VTR250, HONDA VTR250, HONDA VTR-F, HONDA VTR250
It does not work
It is a comparison between OEM and Mega alloy.
OEM is weak at the beginning of effect, feeling gradually getting stronger as it grips. Even if you hold it, it will not work so strongly. Life is 10000 km
Mega alloy is strong from the beginning, it gets even stronger as it grips. I can lock it when I hold it. Winding to Circuit OK. Life is 3000 km
This product strengthened at the beginning of effect, the feeling that I grasped was the same as OEM. Even if you hold it, it will not work so strongly. I do not know because Life is in use.
View detail