Reviews
Fits: YAMAHA X-MAX, YAMAHA XMAX300
I'm satisfied
The design and the feel are great. View detail
Fits: HONDA VFR800, HONDA CBR1100XX SUPERBLACKBIRD
Adjuster is too far away to adjust
OEMLever of CBR1100XX is far (Small hands) I bought it because.
Adjusting the position with Dial's Adjuster (6 steps) is possible, but the Position closest to Lever (6 levels of "1") But it's far in the "middle" or so of the OEM adjustment range.
Therefore, other Position cannot be used, and it is no different from fixed Lever. (As far as my hands go.)
Too bad, because the texture is good.
It would be nice if the Adjuster had a wider adjustment range.
(Quantity:Pair (for Left and Right) (At first, the LeftLever of the "Mere Old Man" was shipped with a non-conforming one. Later, we were able to replace it with a compatible one)
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA CB125R, HONDA CB250R, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, SUZUKI GSX-R125, SUZUKI GSX-S125
Touch is better than OEM.
I used it on my CRF150L, the OEM one doesn't interfere with use but after 7,000km it doesn't reduce much and it squeaks so I replaced it. The squeak is gone and the Touch is much better. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155
Inexpensive because it's a part that wears out often.
I have no complaints about the quality and it is inexpensive.
Since a high percentage of the time I engage the rear brake on my Scooter, which is often run in Tandem, the rear pad wears out quickly. Inexpensive consumable parts are good to reduce the maintenance cost.
I think the Touch is a little soft. I thought it would be even better if it felt a little more plush.
View detail
Fits: HONDA ADV150, HONDA PCX e HEV, HONDA PCX, HONDA PCX160
Mounted on PCX160
I bought it for the dress-up.
Because of the model change, Front and Rear are now Disc brakes, so I installed the for PCXBrake lever for ADV150.
Installation is easier than the previous MODEL because you just remove and replace the Bolt without any problems.
The Adjuster function allows you to adjust the grip to your liking.
The color of the Anodized is good and I like it, and it is a part that can be seen even if I am driving, and there is a custom feeling because it is a part that stands out from the outside.
The three bolts on the brake lever were replaced by separately purchased bolts from Silver to Black.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
Shoddy stuff that's not worth talking about
When I installed it, I dipped it in water according to the instruction manual, but as soon as I completed the installation, one of the ends was torn off It's gone Maybe there was a small scratch on the item or something 。 By the way, there were no scratches on the brake levers because the car is new 。 I bought it for its good looks, but it was the worst piece of crap I've ever seen 。 If you want to remain as a Custom PartsManufacturer for many years to come, you need to make sure you're ready for the future Get your head out of your ass and make sure there's quality control! View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155
The quality is very good
There is no complication such as installation, quality etc.
However, it was good that the point closest to the adjustment range comes a little closer.
I was able to match the color to the car body color, so ◎.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
Lever grip
Brought it to use better grip for brake lever and clutch. Not easy to install. During install need use some trick to put in lever. Comfort and nice looking View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155
It is a good item
It looks pretty good from monotonous Black's OEMLever.
Easy to exchange and compare favorably with the position of OEMLever, the shape has some corners, but it is also rounded
You can use it without discomfort.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155
I think that it is a good product
In the Brake lever which does not need Adjuster adjustment, the texture - Design seems to be very good.
Because the shape is almost the same as OEM, it seems that it can be used without discomfort!
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
Performance is disappointing
I bought it to solve the shortage of air at high speed.
Although it is proven with old PCX 150 to solve by attaching Power Filter
I bought this product because of a pain..
I was wondering if there was more air volume than OEM, I could not feel it.
Clearance is Limit when you turn on this product.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
Ordinary
PCX 150 purchased because the mixture will run short with high revolution.
I understand that Power Filter is good, but because it is not much space under Seat
Buy with this product if it can be improved somewhat.
It is subtle. It should have more air than NORMAL's Filter, but as much as I thought
There is no effect.
It is good in terms of flassiebo effect, but Clearance is Limit.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It is good ♪
Even with Dress-up to Lever Motorcycle's image changes pretty ♪
Installation is not particularly difficult, but there may be a little hang.
I have been using it for about 3 months, but it seems to be okay for the price as well ♪
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It is a good feeling ♪
3KJ - Attached to JOG ♪
It looks good as it becomes Race ish ♪
It was easy to wear a little bit of water wearing and slightly squeezing ♪
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
It is necessary for me
Since the mileage of Dio 110 exceeded 13,000 kilometers, exchanges, NORMALShoe's remaining was about 3?.
The effect is NORMAL same etc. I think so. I am satisfied because the price is reasonable and I am commuting to work..
I would like to focus on how much Life is in the future.
One thing I was concerned about is BALI near the hole that hooks Brake Shoe's Spring
Since there is no such thing in NORMAL, I thought that the quality was worth the price.
View detail
Fits: HONDA CB250F, HONDA GB250 Clubman, HONDA jade, HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA XR400 Motard, HONDA XR400 Motard, HONDA CL400, HONDA CB-1, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA VTR250, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA VRX400 R100 ROADSTER, HONDA VTR250, HONDA VTR250, HONDA VTR-F, HONDA VTR250
It does not work
It is a comparison between OEM and Mega alloy.
OEM is weak at the beginning of effect, feeling gradually getting stronger as it grips. Even if you hold it, it will not work so strongly. Life is 10000 km
Mega alloy is strong from the beginning, it gets even stronger as it grips. I can lock it when I hold it. Winding to Circuit OK. Life is 3000 km
This product strengthened at the beginning of effect, the feeling that I grasped was the same as OEM. Even if you hold it, it will not work so strongly. I do not know because Life is in use.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
I like the feeling of use.
It will be the second purchase. I purchased it with double-sided tape because it failed to install on the clutch side at the time of the first purchase, but I used it by sticking with double-sided tape, but I decided to re-purchase because I lost it while driving. Although it was described in the manual to insert the product using only water, it was difficult to wear it with this, and because there was a great possibility that it will be cut again, it is easy to slip on the product and the lever end part I tried installing it by blowing a little silicone spray so as to make it easy to install. However, after installation, if you do not degrease with a parts cleaner or the like, it will rotate with Zuzzle every time you hold the lever. View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It does not correspond to the thickness of Les Bar End.
As I saw that I was out of impregnation before, I put water in Parts and Lever according to the instruction manual and as a result the Brake side finally succeeded after installing on a day when the temperature was high , Clutch side has expired. The cause is due to the fact that the elasticity is small, but it is forced into the thick bar end.
As a result, we attached a thin double-sided tape on the inside of the Parts and fixed it in a form to fix it in such a way that it made it inconspicuous. When considering purchase, I think that it would be better to prepare for it to expire.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
I have run out when installing.
Since there are times when Lever is hot such as summer, I bought it. I included ample moisture and installed little by little, I was surprised it was torn down. Because it is a high item, please give me a more rugged product. View detail