Reviews
Fits: HONDA PCX HYBRID, HONDA PCX e HEV, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Unity in Endurance
Purchased at the same time as Endurance Custom seat. The specs are the same as in the product picture. I am satisfied with the Large size. I am satisfied with the design and functionality. View detail
Fits: HONDA Rebel 500, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel300
DIY OEMHelmet holder also installed!
The installation method is described as a reminder.
If you install it yourself, you do so at your own risk.
Installation time:20 min.
Required tools:Torque wrench (10mm, 13mmSocket), 6mmHexagonal Wrench?
?Instruction Manual is not included, so you can look at it first on Net.
Temporarily assemble the backrest.
? For now, so just hand-tighten it!
?Quantity:Pair (for Left and Right) Bolt next to the Rear Fender of Quantity:Remove 2pcs (6mmHexagonal Wrench).
? It is quite stiff and can be easily removed using Glasses Wrenchetc.
?? Temporarily fasten to the car body with the supplied Bolt.
When installing the side bag support, use the bolt for the side bag support without the hanger plate.
If you want to add a hanger plate, you need to purchase Bolt separately.
Retighten the backrest bracket (13mmSocket:24N.m).
Retighten the mounting portion of the backrest (10mmSocket:10N.m).
Installation is complete so far:===========
How to install OEMHelmet holder:60-90 minutes
Neji-saurus is purchased and removed.
See Neji-saurus impresario.
Make a hole with a 6mm drill around the bottom of the upper hole on the side where the Backrest Bracket will be installed.
The size of the lens must be gradually increased from 3mm to 4mm to make it large enough.
? I only had up to 5mmDrill on hand and was forced to widen the hole.
Remove the mounting plate of the OEMHelmet holder with the Neji-saurus.
Attach the OEMHelmet holder to the back restBracket with the removed screws (security and screw reuse).
Tighten with Neji-saurus.
==============================
If side bag support is installed, the procedure may be slightly different.
The backrest is a nice touch to tighten up the silhouette!
The OEMHelmet holder could not be used when the side bag was installed, so the Backrest Bracket was modified.
If you don't want more keys and are considering DIY, please refer to this page.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel300
Perfectly compatible with double seat. It does not affect the loading SPACE.
Since it is a CruiserType, we considered Backrest.
We were looking for something that was easy to purchase in terms of price and Simple construction, and decided on Endurance.
I was worried that it would interfere with the DAYTONA Grab Bar Carrier, but I was able to install it without any problems. I was worried that it might interfere with the DAYTONA Grab Bar Carrier, but I was able to install it without any problems.
I think the installation of DAYTONA's Grab Bar Carrier occupies the Bolt along with two Washers from the Rear Fender, but if you remove one Washer and install it, it will be just fine.
Fender → Backrest → Washer → Carrier.
As usual, the Rear circumference must be carefully inserted or the Screw hole may be broken, so it must be occupied slowly while temporarily holding the four screws in place.
The load area has become narrower, but it is still more than 20 cm and can carry a seat bag, etc. It seems to be able to do a one-day camping trip in Tandem.
View detail