Reviews
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
watchman
I bought it because many people wear it and because of the low price.
I am satisfied with the quality of the product, which is better than I expected.
View detail
Fits: HONDA CT125, HONDA SUPER CUB, HONDA CROSS CUB
Best Matches
It is for a CUB, but fits perfectly in Endurance's CenterCarrier. I put my Rain jacket, Goggles for the night, and charging cable in it. However, when refueling, the Seat closes, so you have to hold the Seat with your left hand while refueling with one hand, or with your shoulder while supporting the Seat with the other hand lol. View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA dunk, HONDA FORZA Si, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA PCX150, HONDA glom, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA CBR250R, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CBR250R
difficult to install
The bolt on the mounting does not rotate with the Spanner.
BOXWrench won't go in there because Hook is in the way.
It was difficult to tighten, and it was difficult to get a good grip.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
Bag and Quantity:Set and practicality at its best
The bracket on the underside could have been made a little more parenthesis. I attached the CenterCarrier bag for SUPER CUBCROSS CUB of the same manufacturer, and it went on without any problem. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
It's awesome!!!
Not only does the front-to-back position change, but the side stand is positioned a little further to the left, making the support much stronger. However, the downside is that the support is unstable with the original side stand, so you have to shorten the original side stand or install an adjustable side stand like I did. If you adjust it well, you can park stably on any road that slopes to the left or right. In fact, it would be enough to give it 5 stars, but since I am not satisfied with the combination with the original stand, I give it 4 points. -------------------------------------------------- -------- Instead of simply changing the front and rear positions, the side stand is placed a little more, and the support is very strong. However, the disadvantage is that the pure side stand is anxious. If you adjust it well, you can park it stably anywhere on the side of the road. In fact, it is enough to give five stars, but the combination with the genuine stand is not satisfactory. Powered by Google Translator View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Stable even with heavy Rear
It is difficult to remove the Bolt and Nut of the OEMSide Stand, but the Bracket itself is easy to install.
The feel after installation is good. The STAND is located at the rear, but it is not difficult to apply.
The stability of the vehicle body with the Side Stand out is unmatched by the OEM.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Dedicated Bag is convenient
The bag is also Waterproof Specification and uses a watertight fastener, so you don't have to worry about sudden rain.
It is useful for holding simple tools, Touring net, and Cableetc. for recharging.
It does not lose its shape, but if you attach a bag normally, the length of the belt is quite excessive, so it may be a little troublesome for those who take or attach a bag depending on the situation.
I leave it on and I tuck the excess Belt so that it is not visible.
The installation of the Carrier itself is easy.
Since we will also use Crankcase Bolt for Engine, I would like to have at least Torque wrench.
However, the Multi Bar is difficult to see Navigation even if a Smartphone Holder is attached to it due to its position, so I could only think of attaching a Drink holderetc. etc. (I have not installed anything, though.)
Also, if you put too much stuff in the attached Bag when refueling, the open Seat will fall right out of the way.
Personally, I think it is a very good product.
View detail
Fits: HONDA CT125, HONDA SUPER CUB, HONDA CROSS CUB
Cospa best
I was looking for a bag with Carrier and found this product.
Best of all, the price is cheap.
Material difference from expensive ones
The expensive ones are made of thicker material, so they keep their shape even if the contents are empty.
This product feels slightly crushed when empty...
But it's enough, and I prefer it this way.
I bought it to hold my Gasoline Carrying Can
Holds two 1-liter items (1L and 0.75L pictured) Just fit
Size of carrying can is about φ80 (W) ×245 (H)mm
Not related to Bag, but this carrying can is Material:Once in Aluminum, once in Gold Drink holder
I've used it with it in, but the vibration made a hole at the contact point with the drink holder.
So it is safer to cover the Cover when putting it in the Bag.
In addition to the carrying can, Dustcloth and tools can also fit in the can and are very convenient
View detail
Fits: HONDA CBR1000RR-R, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB250R, HONDA CB1300, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1000R , HONDA 400X, HONDA 400X, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR1000RR, HONDA CBR250R, HONDA CBR250R
So bad
I purchased this product because the color seemed to match. The texture and color were good, but unfortunately, the size of the Bolt part was different and could not be installed. View detail
Rather, Parts that cure the defects of CT125
The completely unreliable NORMAL Side Stand is changed to a reliable Large Stand.
Before the replacement, it was unreliable with nothing on it.
Installing a Box on the Rear is already on the verge of mocking up.
After replacement, it is so stable that you don't feel the need to add STAND.
The STAND, which was originally squishy, is now tightly
(Endurance does not recommend it) in a STAND out state.
Stable when standing on footpeg
It should be this way from the beginning.
Parts to cure CT125 defects
When replaced, the body of the car is more upright than before.
Handlebar must be turned off to Left to be stable.
Become better at ground under Left than horizontal.
Instruction manual not attached Download required
No mention of pre-installation preparation Unfriendly
View detail
I had to remove a lot of stuff.
I had to remove the Shift Pedal, Sprocket Cover, and Pivot Collar to get it off.
Once removed, the rest is easy.
I have a ZETA Side StandExtender, which is a special product for JA65, and there was no interference with the Center Stand, which I was worried about.
View detail
It's insanely good.
I was in a state of yajirobe with just a light push when I put my luggage in the RearBOX, but thanks to this Bracket, I am FirmlyHold ?.
I was worried about what kind of product it would be, but it is a very thick, hard steel, firmly welded, and I had no concerns about its strength from the looks of it. I was not worried about the strength of the product.
The work is easy if you are only careful when installing the stand switch.
View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA MONKEY125, HONDA FORZA Si, HONDA dunk, HONDA ZOOMERX, HONDA glom, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA glom, HONDA PCX, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CB250F, HONDA CBR250R
Good item for monkey 125!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
I don't care if it's another ….
There are plenty of other inexpensive ones, but we chose Endurance made with CarrierOthers.
The quality is perfect.
View detail
Together with other Carrier
I wanted to unify carriers with Endurance, so I chose this one.
I think Balance with its lightness and rigidity is the way to go.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
I had made up my mind from the beginning.
The most important feature of the lineup at Endurance
I think this power is the best!
The rigidity of the product is not so rigid.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
For BigFront carriers
I wanted to add a BigFront carrier, so I chose this one.
I used Endurance's Shield in my last car, so I know it's reliable!
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
A classic!
CT110 HUNTER CUB is a classic!
Front carrier. 。 I bought it because I like the vertical one, not the horizontal one. (Sorry for the confusing wording.)
Installation can be done without looking at the Instruction Manual. It is easy.
View detail