Reviews
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
It was easy!
It was super easy to install, which is good. It looks great and I'm looking forward to the future! View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
For BigFront carriers
I wanted to add a BigFront carrier, so I chose this one.
I used Endurance's Shield in my last car, so I know it's reliable!
View detail
Endurance half crash guard
Very pleased with the quality of this half guard, all the holes lined up and it came with all 6 spacers that go in between the body and the crasg guard. Love the look and it now gives my foot more room when riding. View detail
Installation was easier than expected!
I think this is a great product that is well made and can be ponied up. View detail
It was also installed on a commercial grom!
I was worried about being able to install it on a commercial grom, but I was able to do so after shaving a few places with File.
In my case, I modified two places to avoid the Bolt that holds the Tail lamp under the Rear Sets. (See photo)
These two locations were modified with File. Also, the keyhole to remove the Seat is hidden by the Cowl, so I removed the Wire from the key and modified the Wire to come out from under the Seat to the Rear Fender. (See photo)
Finally, in order to fasten the Over Full Exhaust System, I purchased Bolt, Spacer, etc. for the Exhaust Bracket and Bracket at Endurance, and I also purchased a Stainless Steel Band to fasten the Over Exhaust System. I also purchased a Stainless Steel Band to hold the Over Exhaust System. It took a lot of modifications, but it was like making a plastic model, which was a lot of fun for me.
P.S. Since the Tail lamp is hidden, I modified it to secure 20cm2 as required by law.
View detail
Refreshing appearance
I bought it just for the appearance. Refreshing to see it from the front.
Levels that can use Hexagonal Wrench can be installed.
View detail
Solid for the low price.
I was looking for a Meter visor for my GB350S.
The bracket is well made and can be installed without rattling.
The angle can be adjusted somewhat, so you can set the Style to your preference.
View detail
JC61 Initial Model with MuriKuri attached.
[How is it used?
Decided to modify and install this product for the JC75 to make the Grom JC61Initial Model a Race vehicle.
I looked at the picture on the product page and the Parts List for my JC61, and wondered if the holes were in the same position on the Large body. I thought so.
I thought it would be a cinch to install ….
Was the one you received as per Image?
When we actually tried fitting, we found that the hole position was slightly backward, so we had to make a bracket.
Seat Cowl for JC61 has a flat shape, whereas this product has a lowered mounting hole on the front side.
The position of the Y axis was totally Gap.
Was the installation difficult?
The mounting holes on the front side of the cowl were cut with an electric saw to a large bile, smoothed with a grinder, and a new hole was made in the cowl and a bracket was made.
It was difficult, though, because it was installed on a vehicle that did not conform.
How was your experience with it?
Since this is amateur work, I cut too much Cowl and there is a little gap between it and Seat.
It was fine for use, but looks bad upon closer inspection.
But I don't care about that during the Race, so it's OK.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If anyone is going to compete in the Mini bike race with JC61, please refer to this page (well, no one is...).
View detail
Excellent Fit with the vehicle body
It can be attached Firmly to the BodyFrame for a secure fit. View detail
A little small, but easy to install.
I removed and installed SEdition's Bikini cowl.
I was looking for a meter visor that can be attached with Kijima's Handlebar Mount Bracket.
Other manufacturers' products sometimes interfere with each other, but I bought the Endurance because I thought it would be large and sturdy, and it was perfect.
This time, I bought the Short Type, but the Long Type (6cm longer) might have been better.
They also sell a long type ScreenSingle Body, so if I want to change it, I'll probably buy that one.
I removed the Bikini cowl and Light Cover, although I can't install the SEdition as is.
The Bolt that was used to attach the Bikini cowl can be used to secure the Light.
The Bolt that was used to install the Light Cover is left over.
I've left the bracket on in case I want to put the Bikini cowl back on in the future.
I have the impression that the effect of the screen is not so different from that of the Bikini cowl.
I think the Long Type is not enough for highways, so you can choose which one is better by Design.
View detail
Heavier than expected…
I haven't installed it yet but it's heavier than I thought it would be, I haven't removed the OEM so I can't compare.
I'm hoping the fins will help with the Cylinder's heat, but I'm not sure if it will work.
Design is good
View detail
ENDURANCE Shutter Key Cover
Another nicely made shutter by endurance on my Nmax. No issue on inserting the keys. Be sure to wipe away any grim on the surface of the ignition before sticking the cover onto it. View detail