Reviews
Fits: KAWASAKI W800, KAWASAKI W800, KAWASAKI W800, KAWASAKI W800 STREET, KAWASAKI W800 STREET, KAWASAKI W800 CAFE, KAWASAKI W800 CAFE
Trust and Security
[How is it used?
For box mounting
Was the one you received as per Image?
Same as for other car models.
It's solid
Was the installation difficult?
It may be easy or difficult, depending on the type of car,
For W800, the difficulty level would be about "medium".
How was your experience with it?
The firmness of the product is far superior to other companies' products.
There is a sense of security when the Box is attached.
The only concern is that the top surface of the Carrier is one step higher than the Seat Surface.
If possible, I wanted it to be truer like KawasakiOEM.
[Included Parts:were they on?
Spaceretc. and everything necessary for installation is included.
View detail
Bag and Quantity:Set and practicality at its best
The bracket on the underside could have been made a little more parenthesis. I attached the CenterCarrier bag for SUPER CUBCROSS CUB of the same manufacturer, and it went on without any problem. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Dedicated Bag is convenient
The bag is also Waterproof Specification and uses a watertight fastener, so you don't have to worry about sudden rain.
It is useful for holding simple tools, Touring net, and Cableetc. for recharging.
It does not lose its shape, but if you attach a bag normally, the length of the belt is quite excessive, so it may be a little troublesome for those who take or attach a bag depending on the situation.
I leave it on and I tuck the excess Belt so that it is not visible.
The installation of the Carrier itself is easy.
Since we will also use Crankcase Bolt for Engine, I would like to have at least Torque wrench.
However, the Multi Bar is difficult to see Navigation even if a Smartphone Holder is attached to it due to its position, so I could only think of attaching a Drink holderetc. etc. (I have not installed anything, though.)
Also, if you put too much stuff in the attached Bag when refueling, the open Seat will fall right out of the way.
Personally, I think it is a very good product.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit installed
It is an impression of Refreshing with a small number of parts.
Installation Instruction Manual is not included.
I was in the previous MODEL!
View detail
Fits: HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
cb250r is now a handsome man.
I felt the wind much more with Ron Two as soon as I bought the cb250r.
The ninja250 was a Full Cowl, so of course it was equipped with Screen and I rode it without any complaints.
There was also a long size, but I decided to go with this one because of its appearance.
I compared driving without and with the new system, and the difference was totally different.
Like the wind avoided me lol.
Meter is clearly visible.
View detail
Firmly mountable
I am satisfied except that the Bracket, which is tightened together with Fender, is difficult to put on.
Like others in the Review, it needs to be devised!
The SV650 does not have a grab bar, so by adding a rear carrier, a handle was created.
It is now convenient for hanging maintenanceSTAND
No rattling even with the top case attached.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is one of the first parts you want to install when you buy a new car. View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is the cheapest, but the texture is quite nice. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
A classic!
CT110 HUNTER CUB is a classic!
Front carrier. 。 I bought it because I like the vertical one, not the horizontal one. (Sorry for the confusing wording.)
Installation can be done without looking at the Instruction Manual. It is easy.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Can be used without problems
I think it is not cosmetic, but it is normal. The luggage Hook is so hard to use. View detail
Refreshing and Style!
We chose this product because we wanted to refresh the Blinker from an OEM Fender. I considered other manufacturers, but I thought that this product, which uses OEM parts, would be easy to obtain even if the Blinker was damaged due to a fall, etc. I also thought that a product with an LED Lamp would also be a good choice if the Lamp ran out. Also, the product with LED Lamp was also chosen because we thought that if the Lamp ran out ….
I was assured that the product was thick and sturdy.
Installation is no problem as long as you follow the instruction manual without rushing.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Can be installed by one person
In a certain video site, it was said that it would be difficult for one person to install the Carrier, but if you hold the Carrier from the Rear, it was easy for one person to install it.
Quantity of holes for mounting a helmet holder:Pair (for Left and Right) The room is available in the following location, but there is a caveat.
Since screws are not cut, a nut is required on the reverse side to secure the helmet holder.
Also, since the nut requires a screw lock, it is necessary to use a screw lock agent on the nut to prevent the helmet holder from being stolen by loosening the nut. Theft will be more difficult.
View detail
Reliable in load capacity
We purchased this product when we took delivery of our Grom because the OEM Rear Carrier had a low load capacity. The installation went without a hitch. View detail
Fit feeling!
I am satisfied with the quality and design. I am happy with the quality, design, and quality of the product. I had to use the Tandem Footpeg to reach my feet. I also purchased the Endurance Grab Bar&Backrest at the same time. View detail
Tourer-ization of SS!
Although it is SS, it is surprisingly not hard to lean forward and there is little vibration.
The long distance is very easy because of the
but not suitable for carrying Seat bagetc.
Tandem seat shape and side bag with pointed cowl
Neck was not able to install it stably because of the
Therefore, Carrier is the first choice for long-distance loadability measures.
After consideration, Endurance was the only choice.
It may be a bit dowdy, but you can't turn your back on it!
I thought I would normally take it off, but it is still convenient.
As it is, Henry beguine's Pro II S Size is solid.
It can be fixed and long distance is Moto fizz's Side bag.
Mini Shell Case is also attached to make it a Tourer.
The running stability is a little heavy on the turnaround. It is a little heavy on the turnaround,
HARDWORX aluminum top for rain and theft protection
I also purchased and installed Case25L and it is over 60km/h.
Stain- occurs in Handlebar by AxelOff from….
The case probably weighs about 5 kg, and the Rear fastening point is used as the fulcrum.
Vertical resonance seems to combine with increased rear wheel load. (guess)
23M so Fr Pre-road and Rr. (YSS) Damping adjustment of
I tried to use Posh's Handlebar End
(300g) It was better, although it remained a little.
We'll have to wait and see, but there are measures in place to prevent it from swinging up and down.
I guess I'll consider it.
Also, the reinforcing plate of the part to be held by the Tandem is angular.
I wanted it rounded etc., because it was painful and I wanted it handled!
The desired loadability has been dramatically improved, so that's good!
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Satisfied
Cospa is honestly bad, but the stuff is very good. View detail
No problems with appearance.
It has a massive appearance and thickness, so it looks better from a distance.
I have driven about 500 km with it installed and so far it has been on with no problems.
Note that when attaching a side carrier, a bolt other than the supplied one is required.
View detail
Load Capacity
There are many similar products, but most of them have a low load capacity (e.g., 3 kg). This product, however, is a bit expensive, but if the quality is high, it is understandable. The price is a little high, but if the quality is high, it is understandable.
It is a simple design, so I think it goes with almost any box or bag. If you are not particular about the design, you can't go wrong with this product.
View detail
I was worried about the durability of OEMOption products.
The OEM option rear carrier was not accepted at the store where I purchased the DAX125 because it was available.
Each section has a different wall thickness and a load capacity of 8 kg.
I used to use their Rear Carrier for my Z125, so I know how reliable it is. 28,000 km in 2 years and no problems.
View detail