Reviews
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
It was a good purchase
Installation is not difficult if you have the proper tools and basic maintenance skills. The product itself is well welded, painted, and assembled with good precision.
I am glad I put it on because it changed the impression of the look and gave a sense of volume.
View detail
High quality is realized, seems to be very practical.
[How is it used?
Myself, I don't like Guard, but to use it as a base for fog mounting.
Was the one you received as per Image?
Impressed with the cleanliness and precision of the finish. I think it is a good product for the price.
Was the installation difficult?
The 3 Bolts that suspend the Engine are replaced with the attached special Bolt, so basically, a Jack is required. I think it is easier to work with a smaller Jack.
How was your experience with it?
When I installed it and got on the car, I was impressed by the very high quality of the assembly, which was nicely aligned with the lines of the Radiator cover, as shown in the photo. I was very impressed with the high quality of the assembly.
I have never tried to rub it, but it seems to do the job of PROTECTION well.
[Included Parts:were they on?
The instruction manual is, well, easy to understand.
[Was there anything that disappointed you?
None in particular
Manufacturer conformity is after 2020, and Initial Model does not seem to conform.
The pipe diameter is 25.4mm, so the LED fog bracket fits a wide range of brackets.
LED fogs are in the works, but I will add them when they are installed.
I thought about installing the fogs on the handlebar, but since the R's sibling has a heavier headlight assy than the R, I did not want to add any more weight to the handlebar.
View detail
Great Looking Engine Guard
Out of all the available engine guard in the market, this Endurance Engine Guard blends in the best with the bike itself. Standing afar, you would not be able to differentiate the guard from the black original frame. The tapering of the guard creates a very nice flattering silhouette. Love it very much. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Casually Guard
I didn't want to have a LargeGuard, so I purchased this product. View detail
Fits: HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250 S Edition, HONDA REBEL250 S Edition
I'm satisfied
I am satisfied with the quality of the product and the Instruction Manual, etc. If the bolt connection had been stainless steel, it would have been better. View detail
Mounted on REBEL 1100
I bought it to install it by myself, but I had to remove the Mount Bolt from the Engine... I thought it was too much to handle, so I had the Shop install it for me. It took about 2 hours even for the experienced staff. I am satisfied with the tightening of the foot and the improvement of the parenthesis. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
DL1000 V-STROM250 2023
[How is it used?
From city driving to touring.
I am satisfied with the way it looks.
Was the one you received as per Image?
As per Image, the welding and ?painting are ?nice.
Was the installation difficult?
The exhaust Layout was changed from the 2023 model year,
I thought the installation would be sturdy enough to install a large size, but it was installed without interference.
I had a hard time accessing the tools. I had a hard time accessing the tools.
Socket, Glasses Wrench, Spanner, Long Hexagonal Wrench
We were able to install it in half a day, making full use of a short Hexagonal Wrench.
How was your experience with it?
It looks good, and if you fall down standing up, etc.
I think it will prevent some Damage.
[Included Parts:were they on?
All Bolts and Washers were available.
[Was there anything that disappointed you?
Not particularly.
Other items that would be helpful
Instruction Manual can be downloaded from the web,
Print it out and work on the installation, it's easy to see.
View detail
A stitch in time saves the day
Was the one you received as per Image?
The image looks Polished glossy, but the actual product was semi-glossy and non-glossy.
I am glad that I personally preferred this one.
Was the installation difficult?
Basically, it is easy, but there may be some individual differences, as the pedestal adjustment Washer that connects the lower part of the Frame is included.
There are many intricate parts, and it is better to manage the tightening Torque with ingenuity (because of the co-tightening design with EngineFrame, those without knowledge or experience should be careful).
How did you like it when you installed it?
It may be my faulty installation, but the Left Side is firmly parallel to the lower base, but the Right Side is slightly skewed, and even after tightening, there is still a very small gap.
It is not very noticeable, and I think it is not a part that is frequently loaded, so I have left it as it is.
Personally, I am satisfied because it is very MATCH to the body of the car and the construction is robust enough... ♪
View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Outstanding sense of security
I ordered it and received it immediately.
I was worried about the installation, but it was easier than I expected. I thought it would be better if the replacement Volvo was painted.
It's expensive, but I like the Large size.
View detail
stupid design
A big problem occurs when replacing the air cleaner (filter). One bolt of the air cleaner box cannot be removed due to the interference of the guard. According to the standard, you need to remove the guard, replace the air cleaner, and install the guard again. Very inconvenient. View detail
I like the vertical line.
The engine and vertical line of GB350 are integrated and fit together beautifully. I was worried about the plate part due to its structure, but the actual product is thicker and that solved the problem. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
VSTROM250
It has been 9 years since I rode a MTMotorcycle, so I requested the installation for safety and peace of mind. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Good styling and light weight
When I thought that I wanted to have something like Engine Guard for DL1000 V-STROM250, I was looking for it, and I found this product which is lightweight and seems to have good styling, because the price was also moderate, I purchased it!
I think the packaging of the product was good, Small scratches etc. I didn't find any.
BALI, no paint peeling, it was beautiful.
The warranty card is from the QR code, you need to enter it in the designated Form, it was slightly troublesome, what is the product number? I thought, but it seems to be about EK645DS1A1
The Instruction Manual has no QR code, etc., and it took a little time to find it. If the warranty card has a QR code, I would have liked the Instruction Manual to have a QR code attached.
The tools required for installation are
You will need a 13, 14, 15mm wrench, Spanner or similar, a small monkey wrench might be good to have.
I think it would be easier if you have Ratchet, Extension, or a Socket that corresponds to the above Large size.
If the hexagon is too small, it may be strange to tighten the large hexagon, and if it is too long, it may be strange to tighten the large hexagon.
I think Ratchet + Extension + Hexagon 8mm Socket will make this easier too!
The work itself is not particularly difficult, it is easier to use the Center Stand.
Center's Quantity:The 2pc 100mm Bolt was a bit large and strange to remove and put on, because the weight of the motorcycle put a lot of pressure on the Bolt and it would not come off.
When I pulled it out, I hit it with something hard like a hammer.
When I put it in, I turned it in the direction of Screw. (This one may cause problems with the threads, so please be responsible for your own safety)
I'm not sure if either of these would be a problem if you had someone to help you lift the body a little.
It took me about 40 minutes alone.
Depending on the shape and size of the tool, the exhaust pipe may be wounded, so it may be necessary to cure it beforehand.
The product is called Cowl guard, but the Engine is also in a position to LimitGuard, I can't try it, but I'm hoping for the best!
I am very satisfied with the appearance and lightness of the product, because I am buying it for dress-up purposes rather than Guard this time.
I don't know about the Guard, I feel like it flexes when I push it with my hand just a little bit, so if I'm unlucky it might cause a little damage to the car body.
Especially on the upper side of the Guard, there is no weight-bearing part, so it may be dangerous depending on the way it hits.
But I think it's very cosy, I wish it was available in other colors than Black!
View detail