Reviews
Rather, Parts that cure the defects of CT125
The completely unreliable NORMAL Side Stand is changed to a reliable Large Stand.
Before the replacement, it was unreliable with nothing on it.
Installing a Box on the Rear is already on the verge of mocking up.
After replacement, it is so stable that you don't feel the need to add STAND.
The STAND, which was originally squishy, is now tightly
(Endurance does not recommend it) in a STAND out state.
Stable when standing on footpeg
It should be this way from the beginning.
Parts to cure CT125 defects
When replaced, the body of the car is more upright than before.
Handlebar must be turned off to Left to be stable.
Become better at ground under Left than horizontal.
Instruction manual not attached Download required
No mention of pre-installation preparation Unfriendly
View detail
No longer MC51's standard Custom
It is not used in Short Stand only. It is originally intended to be used in LowdownSpec. and is too tilted in NORMAL state.
The company's for PCXSide Stand boats. The company's for PCXSide Stand boat (EL505K1YA1) The length and angle you are looking for can be achieved by additionally mounting the Unfortunately, there is no board for MC51. If you want to use these together, it is recommended. When replacing, it is best to think in advance how you will pull the Spring.
View detail
I had to remove a lot of stuff.
I had to remove the Shift Pedal, Sprocket Cover, and Pivot Collar to get it off.
Once removed, the rest is easy.
I have a ZETA Side StandExtender, which is a special product for JA65, and there was no interference with the Center Stand, which I was worried about.
View detail
It's insanely good.
I was in a state of yajirobe with just a light push when I put my luggage in the RearBOX, but thanks to this Bracket, I am FirmlyHold ?.
I was worried about what kind of product it would be, but it is a very thick, hard steel, firmly welded, and I had no concerns about its strength from the looks of it. I was not worried about the strength of the product.
The work is easy if you are only careful when installing the stand switch.
View detail
Pricey but worth it.
It is a simple shape, but the steel plate is thick and well painted. The price is high, but the quality is commensurate with the gold price, and above all, it may be rather inexpensive considering that it supports the body of the car. View detail
The anxiety when using Side Stand has been eliminated.
The product itself is quite strong.
The change in position of the Side Stand stabilizes the vehicle when carrying a heavy load such as a Rear box. Personally, I was satisfied with the Large size.
As for the installation, I think it needs to be Torque managed well, so tools and knowledge will be needed.
The only thing is that the distance from the Center Stand is closer, which may be a concern for those who use the Center Stand frequently.
If you are not confident about the work, we recommend that you have it installed at the Shop.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Excellent stability
With the Normal side stand, the front of the vehicle tended to float because of the load in the back and the excessive leaning of the vehicle.
This product has a good balance in this area, so I can leave my car body with peace of mind.
I was very surprised to see that the 65 was only available for pre-order. As a result, I installed it on the 65 with various small modifications, but I do not recommend it.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
It's solid
Well made and highly recommended!
STAND may roll over when loaded
It will be improved.
Side Stand safety device LEAD cale bull length
Limit!
View detail
Custom for CT125 should start now!
Items that will solve the Side Stand problem for CT125.
The Side Stand is about 10 cm back and the mounting position is about 2 cm lower, so it is very stable.
When a large box is attached to the rear, it falls over when lightly pulled, but when this product is attached, it is completely large and sturdy!
If you are going to customize CT125, we recommend that you put this on first!
View detail
Improved stability when parking
Side Stand BoardEL505K1YA of the same manufacturer is applicable.
It is not listed in the compatible car models, but has been confirmed by the Manufacturer.
If you think it leans too much without Lowdown, please try it.
Quantity for Short Stand and STAND boards:Set improves appearance and stability.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
This is good
It is very stable and I no longer have to worry about it falling over.
I'm glad I bought it
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
CarrierBOX, perfect for campers!
The Side Stand of the CT125 is too forward, and often almost falls over to the Left Side when the road surface is sloped or the Carrier is loaded.
This product is quite stable as it can Offset back 9cm. It is an excellent product that I am glad I bought.
View detail
Endurance Right Side Stand
The finish of the bracket and STAND is perfect, and the STANDBOLT nut and springs are Honda OEM parts. The rearward offset makes it difficult to fall over even when the rear box is fully loaded with luggage. I use it with reinforced STANDBracket and it is very useful! View detail
Swish125
I am using this product and it is very good..!! A must buy for those who ride Swish 125!! If you use it without this, the side stand gradually tilts, but it is good to use this product to get a certain height ------------------------------ ---------------- I'm using this product and I love it..!! A must-have purchase for those who ride the Swiss 125!! If you use it without it, the side stand gradually tilts. Powered by Google Translator View detail
I'm satisfied
The one point of the red color is beautiful because the body of the car is entirely black The price is reasonable, given the slenderness of the STAND, but we are happy with it View detail