Reviews
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
We should have done this from the beginning.
I used to use a lever with a parking brake, which is a type of brake that you push into the brake lever.
Screws loose and slipping on hills etc....
I had to re-tighten it each time.
And if you tighten it too much, the Stop-lamp stays on.
Lever fades and rattles, and I'm sick and tired of the inferiority of Chinese products.
I reverted to OEM Brake lever.
I found this product on YouTube, purchased it and installed it.
Installation itself is very easy.
The effect is also Outclassing
Why didn't I buy it sooner?
View detail
Fits: HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA APE TypeD, HONDA CBR125R, HONDA CBR150R, HONDA CBF125F
feel well
The more you grip the lever, the more it works. When the lever is suddenly and strongly applied, the front fork sinks suddenly, so I think this type is easier to control. I don't know about the durability of this type. I would prefer a more flashy color to give it a more custom look. View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
For Scooter, it is a necessity.
Installed on ADV160 。 For Scooter, it's a must-have!
You can take your hands off the wheel without worry when waiting at a traffic light with a gradient.
The release is also good for One-touch! Installation is also super easy.
I used half of the Point this time and am disappointed that the price is a little high.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
Simplified parking brake
This kit is for a parking brake kit with a brake lever that can be inserted into the back mirror.
For parking brakeON, grip the Rear brake lever and insert the Knob.
To release the brake, grasp the rear brake lever again, and the Knob will pop out due to the repulsion of the Spring, and the parking will be released.
I think it is effective for parking on a slope with a Scooter without Shift Pedal.
Motorcycle with GEAR, I would put it in low and park on a slope.
The installation itself is simple:just cover the LeftBack Mirror.
This would be a measure to prevent vehicles from starting and tipping over when parking on a slope,
Please think carefully about the situation and do not force the installation.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
I'm satisfied
You can park with Side Stand without worrying about the slope.
Waiting at traffic lights is also easy.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
Better than I imagined.
With all due respect, I was worried about the price for the apparent brevity of the structure, but after buying it and experiencing the Fit feeling and operability, I was glad to have it at this price.
This is a RECOMMENDATION for those who are struggling!
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA CB125R, HONDA CB250R, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, SUZUKI GSX-R125, SUZUKI GSX-S125
Rear is also replaced along with Front.
I bought it for Grom
I think the standard for this class is still DAYTONA's Red Pad, but I became interested in attaching something different, so I chose this one.
I have never used a new Red so I can't compare. I like it because it is wearing out t but stops much better than the Pad.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
Excellent
Material:Stainless Steel is fine.
Safe parking on slopes.
But … it is expensive … …,
View detail
Fits: その他 , HONDA 400X, HONDA 400X, HONDA videotape recorder, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA FORZA, HONDA CBR400R, HONDA CBR400R, HONDA CBR400R, HONDA CBR250RRR, HONDA CBR250R
Image changes
It was a good decision to buy it because the Tension goes up every time I ride. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
Must-have item for peace of mind
[How is it used?
Used on sloped parking lots and shoulders.
Was the one you received as per Image?
It is rigid and well made, but the price of over 5,000 yen is high. The price of 2,500 yen is appropriate for the product itself. However, it is not so expensive as the price of the product itself, which is about 2,500 yen. I'm just thankful they sell such a niche product." It is acceptable if you think it is.
Was the installation difficult?
Easy
How was your experience with it?
After installation, I tried to operate it several times, but at first it was stuck and could not be released Smoothly. After using it, it started to work Smoothly.
[Was there anything that disappointed you?
None in particular
[Others]
The large Endurance logo is sealed, so it can be peeled off if desired.
Simply hold the Brake and press Pin to lock; hold the Brake one more time to automatically release. Easy to use.
View detail
Beautiful
The installation was easy since it was just a simple installation, and it was easy to remove the OEM screws, but you need to be careful because the screws may be hard. Also, the routing fluid leaks, so you just need to be careful about the angle. View detail
Cool
The modeling is good and I like it very much.
Purchased the color Gold.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF 250
Wow that's cool
It is easy to replace and Dress-up replacement Large.
It's nice because you can choose the color to your liking.
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
Performance above NORMAL
Replaced because of squealing at OEMNORMAL. The effect seems to be no more or less than NORMAL. I'm hoping to see how well Life does. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
I have hang to adjust, but I feel more comfortable stopping on a hill.
CT125 has centrifugal clutch, so when stopping on an uphill, it is not only necessary to put the gear into first gear like a general MTM model, but also to put the gear in by turning the body downwards. If the vehicle is stopped facing up with the center stand, it is also strange to remove the stand when there is a large amount of luggage. In such a case, this is useful.
Scoteretc. has a SIDEBrake-like auxiliary brake depending on the model, so the Image is similar to that.
If you grip the Front brake lever and push the Knob in with your Left hand, the Front is locked, so you can stop the car quite safely.
To release the Knob, lightly grasp the Brake lever, and the Knob will automatically return and release by the force of the Spring.
Although it requires some hang to adjust the position and Mirror at the same time because the Mirror is co-tightened to the Mirror, it can be installed by anyone with Wrench.
I removed the Manufacturer logo Sticker because it was too assertive, but I like it because it blends in like an OEMOption.
View detail
Fits: HONDA CB250F, KAWASAKI Z125 PRO, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA VTR-F, HONDA VTR250, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA glom, HONDA PCX125, HONDA glom, HONDA FORZA Si, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR125R, HONDA 400X, HONDA CB400F (2013-), HONDA 400X
Mounted on PCX160
I installed it for Dress-up.
Just replace it with the OEM Cover.
The bolt that comes with the gun is Silver, so I bought a M4 15 oz. Stainless Steel Black Cap bolt separately and replaced it.
Because it became a front-back disc by Model change, Quantity:2pc. I needed a set, and it was quite expensive, but it was a place where I could see it when I was driving.
I am satisfied
View detail
Fits: HONDA CB250F, YAMAHA YZF-R25, HONDA GROM, HONDA GROM, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, KAWASAKI NINJA250R, HONDA VTR-F, HONDA VTR250, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA CBR650F
Mounted on PCX160
I installed it for Dress-up.
It only takes about 5 minutes to replace the OEM holder.
It comes in two anodized colors and has four different color lineups to choose from to match your motorcycle.
The Bolt that comes with it is Silver with Stainless Steel, so I thought it doesn't fit and bought Black Bolt and Bolt cap separately.
Installed.
View detail
Fits: HONDA CB250F, YAMAHA YZF-R25, HONDA GROM, HONDA GROM, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, KAWASAKI NINJA250R, HONDA VTR-F, HONDA VTR250, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA CBR650F
Very cool
Just take the original off and put it back on! PetitCustom in less than 5 minutes!
It's cheap and I can see it when I'm riding it, so I'm very happy with it
Good purchase
View detail
Fits: YAMAHA YZF-R25, HONDA CB250F, その他 , HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA GROM, HONDA GROM, HONDA 400X, HONDA CB1100, HONDA CB500F, YAMAHA YZF-R3, HONDA 400X, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, YAMAHA MT-09, SUZUKI GSX250R, HONDA Forza300, YAMAHA MT03, KAWASAKI Z125 PRO
Looks good to BlueBlack
Blue color of Anodized is gathered up as Accent in the whole of BlackBase.
I use it together with MASTERSinterCap of the same series
View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
Brilliant Gold
Antlion is Matte feeling, here and POSH are Clear Color.
Easy to install, tasteful Handlebar Around the point around Large change is good.
View detail