Reviews
I chose Black to match the Black body.
As a beginner, I chose this product based on its appearance and reputation. The installation was easy even for a beginner like me, referring to the YouTube video. The appearance after installation was sharp as planned and I liked it. I'm glad I waited 3 months to install it, because it's a bit rickety compared to the NORMAL state. It's a good product overall. I think it is a good product overall. View detail
Slight relaxation
I use it on my WR250X
I asked a motorcycle shop to replace the seat cover at the same time.
When you ask a motorcycle shop to Make sure they're exactly on the same side. Ya I'd rather just install it than pay for the labor." I think it's better to communicate your requests such as
In the case of a pontoon, since a foreign object is added to the seat, the footing will naturally be worse and the seat will look bulky.
I've been driving a bit after installing it, but honestly, it doesn't seem to have much effect.
I think I bought myself some time before my butt started to hurt, but what hurts is going to hurt.
It's a good way to prevent butt pain, but I'm not sure if it's worth the cost.
View detail
Lever you can't lose by buying it.
If you use the OEM lever, the clutch side is not adjustable.
I did not hesitate to purchase this product because I have a tendency to stall my motorcycle at very low speeds, probably due to my lack of skill.
The texture and construction are excellent, and by adjusting the clutch to the very front, I've been able to reduce the frequency of stalling considerably (it still happens occasionally).
It looks great with the Matte Black body, and it's a good idea to keep the OEM spare in case of emergency.
The OEM Product is also quite expensive, so the Quantity:Pair (for Left and Right) The price is less than 10,000 yen, which seems to be reasonable.
View detail
I'm reducing it.
Seat like I was sitting on a board has improved.
I hope to be able to describe how it feels over long distances.
View detail
I bought this for vibration isolation!
I bought this product for anti-vibration purposes as I am converting my zzr1100 into a bar handle.
By the way, Handlebar is using Firena TEC's Medium.
It originally came with a small weight, but I wanted to reduce the vibration even more, so I decided to go with a big weight! (laughs).
As for the important vibration, it was reduced because the Bar End is heavier and has a core inside than the small Bar End of aluminum.
But don't be overconfident, because the vibration doesn't disappear in the whole area.
On my motorcycle, I get the most vibration at around 4000-4500 rpm.
I think this is the area where Handlebar and Bar End resonate with Engine's RPM.
You can't tell until you actually put it on, so I think it's best to put it on and see where the RPMs tend to go.
View detail
EFFEX seat cover perfectly fits NC750
"The original NC750 seat cushion is rather hard. After buying this seat cushion, the comfort is greatly improved. It used to be uncomfortable after riding for more than an hour, but now it’s okay to ride for four hours. In short, it’s worth buying, great value! ------ -------------------------------------------------- - The NC750 original cushion is hard, bought this cushion installed, the comfort is greatly improved, the original riding more than an hour butt, now there is no problem for four hours. In short, worth buying, value! View detail
It's a very ordinary Heat Shrink Tube.
Used to fix a wrap-around Grip heater.
I used to use a common Heat Shrink TubeTube that is also sold at Home center, but I was a little concerned because it was slippery or compatible with Glove.
It's in the product description.
The surface is designed to be non-slip and secure.
I bought this book because I was attracted by a sentence that says
In conclusion, it is the same with Large. Rough operation, if you are not careful, it will slip.
If you don't care about the manufacturer or the pattern, Recommendation is not for you.
I bought a cheap heat gun from Amazon for installation. (It's not that hot) I worked with it, but this product was easier to shrink and I had the impression that it was less loose when I heated it up again using the Grip heater.
Overall, I don't recommend it, but I think it can differentiate itself from other users who use Heat Shrink Tube. The price is a little bit high.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It can be used for New ModelGSX1300R HAYABUSA.
I bought this after checking that the part number had not changed from the second generation GSX1300R HAYABUSA.
I think the strength is not a problem because we sell OEM Product by processing
It is said that it is 2cm short, but when I put it side by side, I can't feel the difference so much.
You can try to replace it. 'A little more Motorcycle leaning, perhaps? It was about the same change.
Unfortunately, the angle of the welded steel plate is not correct and the gap with the ground is too large.
It might be better to have a shop that can weld make a custom one for you!
View detail
HandlebarUp
I'm 170cm tall and a little small, and the DAEG footpeg is at the front, so I went with the Handlebar Up. It is a shame that the OEM Handlebar Weight could not be used. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3
grip
The grip is great. There is no sticking, and the force needed to grip it is reduced by half.
However, the Clutch lever felt a little far even if I made it the closest with Adjuster for me who has small hands.
But overall, Large satisfied.
View detail
Good
The Lever ratio will change slightly. (Clutch) You will get used to it. Finger contact and feel are both good. Personally, I don't think I need Logo on my Lever. View detail
Motorcycle Seat cushion
I bought this as a seat cushion for my motorcycle. In my case, I had Mesh Type Cushion for summer, so I bought it to use Seat cushion even in winter. As for the performance, I think that there are individual differences such as the vibration under the seat and the reduction of the pain of the butt, but there is a definite effect for me. A friend of mine has this product installed on a Honda single cylinder motorcycle, but the vibration when riding is considerably different without it. If you are suffering from not only pain in your butt but also vibration under the seat, this is the product you should try. In fact, I also use the Seat cushion itself for the purpose of reducing the vibration from under the seat, so I recommend it. View detail
EFFEX Handlebar Weight BIG for Aluminum Handlebar
I used it when I changed to ZX25R O-Pipe Handlebar.
The large size of the end is also a good large size, and it was good to reduce vibration.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA MT03
Changed for new Handlebar position
Due to the change of the Handlebar position, the length of the OEM Throttle Cable was not reachable, so I replaced it.
MT25 is NAKED, so there is no Cowl removal, so it is less difficult to replace.
View detail
Pimp it!
Exclusive Design is as good as it gets.
It can be popped on, just align the holes like OEM.
Don't forget to use Bar End separately.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250F, SUZUKI BANDIT1250
3Quantity:Purchase Set eyes
Same product3Quantity:This is the second set I purchased. Because the mileage is 40-50,000km per year, the wear of the resin part is severe.
Repeat. As always, the ease of grip is outstanding. I also considered other companies' products, but I decided to go with this one. I was really hoping for a black color, but since it takes time to deliver, I decided to go with blue.
View detail
Handlebar exchange
Installation processing, etc.. I think it's very good. View detail
Quantity:I'm happy with the price and performance of this Set!
Since the OEM Clutch lever does not have an adjustment feature, the lever position felt too far away.
I had no complaints with the Brake lever because of its adjustability, but replacing just the One Side is not a good idea.
It's not good for Visual....
Quantity:I found this when I was looking for something affordable in Set.
I found the grip and lightness to be not much different from the OEM, but the six-step adjustment feature is very useful.
I think it would have been even better if it was a little lighter.
I was going to get the Black, but it was not in stock at the time of purchase and would take a while to deliver.
I went with Red to match the color scheme of the Tank.
It looks and feels more custom, and I'm happy with the results.
When I was a teenager, I used to break the Lever and replace it by standing on it, so I'm good at working on it (^^ゞ)
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja 1000SX
Necessities for short stature
The ball of the mother's finger is attached from the toe stand.
When I added OHLINS Suspension, the ride height went up, so I added it.
I've also heard that as Cavitation acclimates, it goes down a bit.
Short Stand is a necessity because of 20mm Down.
Rear Fender was modified slightly.
View detail
A hint of goodness.
I couldn't stand the pain in my butt with the Normal seat of the D Tracker, so I changed it to the COZY seat of DAYTONA, but my butt still hurt. So I added Gel Zab to the COZY seat, and the pain was relieved somewhat. However, after 5 or 6 hours of riding with sitting, it will start to hurt again. It's better to have it than nothing, it's a product with a faint feeling of goodness. View detail