Reviews
Fits: HONDA Rebel1100, HONDA Rebel1100, HONDA Rebel1100T, HONDA Rebel1100T
Just fit
I had been using a similar product but was having trouble with the fit and comfort.
I bought it to see how much of a difference it would make, and I am Large satisfied with both Just fit & comfort.
It is also active in Touring.
When attaching, the Seat is removed and pulled on all four sides while tightening with the string at the tip.
It takes about 5-10 minutes. No problem for anyone.
View detail
Looks OK.
I don't feel much use for it, but it looks OK. View detail
Fits: SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI KATANA
2022 GSX-S1000 EFFEX SHORT + LUST RACING LOWERING KIT(25mm)
2022 GSX-S1000 EFFEX SHORT + LUST RACING LOWERING KIT(25mm) It's a good product It goes well with the 25mm Lust Racing Lowering Kit Front Fork lowered by 12mm View detail
To prevent Grip wear and tear.
I've used it on other vehicles, but installed it in case of Grip wear and tear.
I couldn't find a heat gun so I shrunk it with pod warm water.
View detail
Exactly while only a small amount of change
The STD Handlebar was slightly in front, so we installed it to slightly change the position.
The result was a satisfactory Position.
It looks and feels like a NORMAL place.
I'm glad I was able to adjust the Lever position a little bit.
View detail
Fits: HONDA Monkey125 (MONKEY125), HONDA GROM (Grom 125), HONDA CB125R, HONDA CB250R, HONDA CBR250R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
Easy to install, easy to use
It will be the cheapest product with the same functionality,
Installation - no problems with the feel of the product.
It is a very good product.
View detail
Fits: HONDA Monkey125 (MONKEY125), HONDA GROM (Grom 125), HONDA CB125R, HONDA CB250R, HONDA CBR250R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
I think that it is a good product
They are inexpensive and can be installed without modification.
Clutch adjustment is now easy.
View detail
Improvement of Seat without Anya
I bought a Seat with Other Brand Product skin on my GSX1100S KATANA. I noticed after I bought it that it seemed to be very bean-crumbed, and the ride was hard, and the corners hit my inner thighs hard because of the original shape. I put in the Gel zab and made it so that it softens around the gills. I am highly satisfied. View detail
Installed on SV650X
The Urethane was not hollowed out, but simply laid down as it was, and was neatly implemented without any visible bumps.
The pain in my buttocks has improved dramatically, and I used to have such a hard time sitting in the office chair on Monday after riding full time on Saturday and Sunday, but that pain is now gone.
If you ride for 4-5 hours in a row, you will get pain from the pressure, but it is not Large pain, and the pain will go away as soon as you take a break for 30 minutes. Damage to the cells of the buttocks due to thrusting is almost Zero.
Besides the pain, there were three other improvements.
One is that the tilt has been eliminated and the seat surface has been increased, allowing the Seat to sit in its natural place slightly behind the Seat. This made it easier to apply load to the Rear.
Two, the Seat height increases, making it easier to fall over and crowd.
Thirdly, I am 177cm and the OEM was tight in the knees due to the close proximity of the seat and footpeg, but this has also been improved.
The OEMs are too much anxious.
Seat on SV650X is very bad.
And the Damage to the buttocks is egregious because the suspension is terrible.
(I'm writing drunk, so there may be typos or funny sentences, but you get the idea.)
View detail
A must for Downsas.
NITRONDown Sas and Quantities:Short Stand is a necessity for down suspension. Before the replacement, the motorcycle almost fell over when fueling the stand, but after replacing the short stand, I have no more worries. The nut was so hard that I gave up on replacing it myself and asked the shop to do it for me.
A must have for Short suspension!
View detail
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
Discontinued Hig is equivalent to 30mmUp Spacer?
I used a Gcraft 30mmUp Spacer for about three years because the handlebar on my late Grom JC61 was so low.
It was much better, but I was still riding without feeling 100% comfortable.
By chance, I had a chance to get a discontinued HighType, and I thought it would be good without the Handlebar Spacer. I thought it might be possible to use it without Handlebar Spacer.
We compared the height when we replaced it, and it was still almost the same height as the 30mmUp Spacer4.
It took some time to remove the existing Grip, but I managed to replace the Handlebar and ride it for a bit.
Definitely easier to ride than before!
No matter where I sit on the Seat, I don't have that feeling of being uncomfortably close to the Handlebar!
In other words, it fits tremendously well.
Perhaps it is important that the handlebar is not only raised, but also moved back a little.
I have a long upper body, so High is OK for me, but sometimes I think it could be a little lower. If you have a normal body type that feels the handlebar is too low, I think the current 7mmUp and 7mmBack will be enough to get a good seat position.
View detail
Reduced handlebar vibrations!
very happy with this purchase. previously i had a difficult time buying handlebar ends because they were mostly cosmetic, hardly any weight on them at all. (you need weight in order to cancel out vibrations.) and because most of this product is INSIDE the handlebar, is does not protrude too much out of the handlebar. (this is a minor cause for concern because if the motorcycle falls, the handlebar end will not have much protection. but the benefits of the vibration dampening outweight this.) View detail
Fits: SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1250, SUZUKI BANDIT1250F, SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM1000
Quantity:Buy 4th Set Repeat
This time I changed my mind and purchased Repeat in Black.
The feel of the controls in your hand is as good as ever.
View detail
It is safe because it is a car model Exclusive Design.
Replaced OEMHandlebar that was bent in a fall.
Since it is a car model Exclusive Design, it is also safe for Cable and other handling.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Wow, such a beautiful lever. It's very convenient and has a delicate finish
Wow, such a beautiful lever. It's very convenient and has a delicate finish The price is reasonable and the quality is better than expected. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
-2 cm is quite a difference.
-Just 2cm lower makes all the difference in the sense of security. If you do not have a rear stand, you should ask the shop to install it for you. It is possible to replace it without it, but it is dangerous. The height of the car will be lowered, but it will not affect the handling that much. View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
Although the amounts of adjustments are only few in every 5 mm and a number, it is quite large by a physical feeling. Since he was CHIBI, the pure handle felt a little distantly, but it became considerably easy when using this. It became easy in s
Although the amounts of adjustments are only few in every 5 mm and a number, it is quite large by a physical feeling.
Since he was CHIBI, the pure handle felt a little distantly, but it became considerably easy when using this.
It became easy in since a leeway was given on the arm also at the time of a right and left chip box.
A cornering is pleasant to say! A motorcycle feels it light.
Since the store was asked for attachment, Yukichi flew, but regret is not carried out.
View detail
Protect Grip
Grips are consumables. They wear out unexpectedly. You can replace the grips when they wear out, but the cost of a grip heater, an OEM product of a European car, is high. Therefore, Heat Shrink Tubes are used to protect them from wear.
For fishing rods. However, I am using this product, which is a Motorcycle product, because I am concerned about the appearance of the product.
To install, simply heat it up with a commercially available heat gun. The overall length is 105mm and fits snugly without cutting.
It may depend on the Gloves, but with the Gloves I use, I don't notice any slippage.
The grips are thicker, so people with small hands may feel some discomfort.
View detail
Very comfortable
I asked the Seat shop to modify and install the OEMSeat.
The OEMSeat on the R nineT is split front and rear, with SS in both front and rear.
In my case, I felt discomfort in my buttocks after an hour or so with NORMAL, but after processing, I have no problem on the front seat side even when I use it for touring, such as driving 600 km round trip in two days.
However, the rear seats were not as comfortable as the front seats because the footpeg position was relatively high and more weight was distributed to the buttocks.
Still, I find it tough to spend long periods of time in Tandem if I don't have Gel Zab in.
I am glad I was able to get in.
Incidentally, although I had experience in reupholstering Seat Covers, I did not have the tools or experience to shave the anchors, so I asked PRO to do the installation.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA HORNET250, HONDA HORNET600, HONDA CB750, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA NC750X
I like the texture.
I was not sure about the color, but I chose Gold to match the Wheel. It is a little darker gold than I expected, and I feel that it is a bit gaudy, but it is very comfortable to use. I was not sure about the U-KANAYA one, but this one was about 5,000 yen cheaper, so I had to wait for about a month and a half for it to arrive.
I was concerned about the Clutch Side because there were a few reviews that said it rattled, but it was Large and sturdy.
There are only four colors available, so it would be nice if there were more colors available.
View detail